slic3rpe: Add newest Prusa changes
This commit is contained in:
parent
e5643df5f5
commit
19b4dc6543
38 changed files with 5672 additions and 32 deletions
|
|
@ -1,13 +1,13 @@
|
||||||
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:42:59
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-14 at 20:59:15
|
||||||
bed_temperature = 55
|
bed_temperature = 55
|
||||||
bridge_fan_speed = 60
|
bridge_fan_speed = 100
|
||||||
compatible_printers =
|
compatible_printers =
|
||||||
compatible_printers_condition =
|
compatible_printers_condition =
|
||||||
cooling = 1
|
cooling = 1
|
||||||
disable_fan_first_layers = 3
|
disable_fan_first_layers = 1
|
||||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
extrusion_multiplier = 1
|
extrusion_multiplier = 1
|
||||||
fan_always_on = 0
|
fan_always_on = 1
|
||||||
fan_below_layer_time = 60
|
fan_below_layer_time = 60
|
||||||
filament_colour = #29B2B2
|
filament_colour = #29B2B2
|
||||||
filament_cost = 0
|
filament_cost = 0
|
||||||
|
|
@ -25,9 +25,9 @@ filament_unloading_speed = 90
|
||||||
first_layer_bed_temperature = 65
|
first_layer_bed_temperature = 65
|
||||||
first_layer_temperature = 200
|
first_layer_temperature = 200
|
||||||
inherits =
|
inherits =
|
||||||
max_fan_speed = 45
|
max_fan_speed = 100
|
||||||
min_fan_speed = 20
|
min_fan_speed = 100
|
||||||
min_print_speed = 10
|
min_print_speed = 10
|
||||||
slowdown_below_layer_time = 20
|
slowdown_below_layer_time = 10
|
||||||
start_filament_gcode = "; Filament gcode\n"
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
temperature = 200
|
temperature = 200
|
||||||
|
|
|
||||||
107
Slic3rPE/print/0.20mm FAST 0.6 nozzle MK3 own.ini
Normal file
107
Slic3rPE/print/0.20mm FAST 0.6 nozzle MK3 own.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-14 at 20:59:07
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 4
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 35
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.2
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 200
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.2
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 45
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 200
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 60%
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 5
|
||||||
|
travel_speed = 100
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/print/0.40mm FAST 0.6 nozzle MK3 own.ini
Normal file
107
Slic3rPE/print/0.40mm FAST 0.6 nozzle MK3 own.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-19 at 11:40:32
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 2
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 50
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 15%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.2
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 200
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 80
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 200
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 60%
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 200
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/print/0.40mm GOTTAGOFAST 0.6 nozzle MK3.ini
Normal file
107
Slic3rPE/print/0.40mm GOTTAGOFAST 0.6 nozzle MK3.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-13 at 14:55:26
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 35
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 100
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 45
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 5
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 3
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 10
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 5
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 100
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
50
Slic3rPE/printer/Original Prusa i3 MK3 0.6 nozzle own.ini
Normal file
50
Slic3rPE/printer/Original Prusa i3 MK3 0.6 nozzle own.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-19 at 18:35:07
|
||||||
|
bed_shape = 0x0,250x0,250x210,0x210
|
||||||
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile = "Prusa PLA"
|
||||||
|
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X125 Y200 Z{max_print_height}\nM84 ; disable motors
|
||||||
|
extruder_colour = #FFFF00
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = marlin
|
||||||
|
inherits = Original Prusa i3 MK3 0.6 nozzle
|
||||||
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||||
|
max_layer_height = 0.35
|
||||||
|
max_print_height = 210
|
||||||
|
min_layer_height = 0.1
|
||||||
|
nozzle_diameter = 0.6
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model = MK3
|
||||||
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant = 0.6
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 1
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 1
|
||||||
|
retract_length = 0.8
|
||||||
|
retract_length_toolchange = 4
|
||||||
|
retract_lift = 0.6
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 209
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 35
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = M115 U3.3.0 ; tell printer latest fw version\nM201 X1000 Y1000 Z1000 E9000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X8 Y8 Z0.4 E1.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 1
|
||||||
|
z_offset = 0
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:40:51
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 60
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 3
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 0
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 215
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 45
|
||||||
|
min_fan_speed = 20
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 215
|
||||||
33
Slic3rPE/snapshots/20180707T114355Z/filament/Real - PLA.ini
Normal file
33
Slic3rPE/snapshots/20180707T114355Z/filament/Real - PLA.ini
Normal file
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:42:59
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 60
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 3
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 0
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 200
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 45
|
||||||
|
min_fan_speed = 20
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 200
|
||||||
107
Slic3rPE/snapshots/20180707T114355Z/print/Course - HyperCube.ini
Normal file
107
Slic3rPE/snapshots/20180707T114355Z/print/Course - HyperCube.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-23 at 12:43:39
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = HyperCube
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 2
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180707T114355Z/print/Course - M200.ini
Normal file
107
Slic3rPE/snapshots/20180707T114355Z/print/Course - M200.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:17
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = "Malyan M200"
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.21875
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 60
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.21875
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 60
|
||||||
|
perimeters = 3
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 5
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 40
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 4
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 40
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 120
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180707T114355Z/print/My Settings.ini
Normal file
107
Slic3rPE/snapshots/20180707T114355Z/print/My Settings.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-13 at 15:14:56
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
50
Slic3rPE/snapshots/20180707T114355Z/printer/HyperCube.ini
Normal file
50
Slic3rPE/snapshots/20180707T114355Z/printer/HyperCube.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:29
|
||||||
|
bed_shape = 0x0,300x0,300x200,0x200
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = repetier
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.4
|
||||||
|
max_print_height = 200
|
||||||
|
min_layer_height = 0.16
|
||||||
|
nozzle_diameter = 0.6
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.6
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.5
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 35
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F500 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n; Begin printing.G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
50
Slic3rPE/snapshots/20180707T114355Z/printer/Malyan M200.ini
Normal file
50
Slic3rPE/snapshots/20180707T114355Z/printer/Malyan M200.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-02 at 11:01:10
|
||||||
|
bed_shape = 0x0,120x0,120x120,0x120
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y120 ; present bed\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = marlin
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.30625
|
||||||
|
max_print_height = 115
|
||||||
|
min_layer_height = 0.0875
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 3
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 50
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y0 Z0.2 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n\n; Begin printing.\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
19
Slic3rPE/snapshots/20180707T114355Z/snapshot.ini
Normal file
19
Slic3rPE/snapshots/20180707T114355Z/snapshot.ini
Normal file
|
|
@ -0,0 +1,19 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-07 at 14:43:55
|
||||||
|
|
||||||
|
[snapshot]
|
||||||
|
id = 20180707T114355Z
|
||||||
|
time_captured = 20180707T114355Z
|
||||||
|
slic3r_version_captured = 1.40.0
|
||||||
|
comment =
|
||||||
|
reason = upgrade
|
||||||
|
|
||||||
|
[presets]
|
||||||
|
print = 0.15mm OPTIMAL MK3
|
||||||
|
filament = Prusa PLA
|
||||||
|
printer = Original Prusa i3 MK3
|
||||||
|
|
||||||
|
[Vendor:PrusaResearch]
|
||||||
|
version = 0.1.6
|
||||||
|
min_slic3r_version = 0.0.0
|
||||||
|
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||||
|
model_MK3 = 0.4
|
||||||
1098
Slic3rPE/snapshots/20180707T114355Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
1098
Slic3rPE/snapshots/20180707T114355Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
File diff suppressed because it is too large
Load diff
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:40:51
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 60
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 3
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 0
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 215
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 45
|
||||||
|
min_fan_speed = 20
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 215
|
||||||
33
Slic3rPE/snapshots/20180713T123122Z/filament/Real - PLA.ini
Normal file
33
Slic3rPE/snapshots/20180713T123122Z/filament/Real - PLA.ini
Normal file
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:42:59
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 60
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 3
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 0
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 200
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 45
|
||||||
|
min_fan_speed = 20
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 200
|
||||||
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-13 at 14:55:26
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 35
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 100
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 45
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 5
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 3
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 10
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 5
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 100
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180713T123122Z/print/Course - HyperCube.ini
Normal file
107
Slic3rPE/snapshots/20180713T123122Z/print/Course - HyperCube.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-23 at 12:43:39
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = HyperCube
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 2
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180713T123122Z/print/Course - M200.ini
Normal file
107
Slic3rPE/snapshots/20180713T123122Z/print/Course - M200.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:17
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = "Malyan M200"
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.21875
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 60
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.21875
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 60
|
||||||
|
perimeters = 3
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 5
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 40
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 4
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 40
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 120
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180713T123122Z/print/My Settings.ini
Normal file
107
Slic3rPE/snapshots/20180713T123122Z/print/My Settings.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-13 at 15:14:56
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
50
Slic3rPE/snapshots/20180713T123122Z/printer/HyperCube.ini
Normal file
50
Slic3rPE/snapshots/20180713T123122Z/printer/HyperCube.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:29
|
||||||
|
bed_shape = 0x0,300x0,300x200,0x200
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = repetier
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.4
|
||||||
|
max_print_height = 200
|
||||||
|
min_layer_height = 0.16
|
||||||
|
nozzle_diameter = 0.6
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.6
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.5
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 35
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F500 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n; Begin printing.G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
50
Slic3rPE/snapshots/20180713T123122Z/printer/Malyan M200.ini
Normal file
50
Slic3rPE/snapshots/20180713T123122Z/printer/Malyan M200.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-02 at 11:01:10
|
||||||
|
bed_shape = 0x0,120x0,120x120,0x120
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y120 ; present bed\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = marlin
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.30625
|
||||||
|
max_print_height = 115
|
||||||
|
min_layer_height = 0.0875
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 3
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 50
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y0 Z0.2 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n\n; Begin printing.\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
19
Slic3rPE/snapshots/20180713T123122Z/snapshot.ini
Normal file
19
Slic3rPE/snapshots/20180713T123122Z/snapshot.ini
Normal file
|
|
@ -0,0 +1,19 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-13 at 15:31:22
|
||||||
|
|
||||||
|
[snapshot]
|
||||||
|
id = 20180713T123122Z
|
||||||
|
time_captured = 20180713T123122Z
|
||||||
|
slic3r_version_captured = 1.40.1
|
||||||
|
comment =
|
||||||
|
reason = upgrade
|
||||||
|
|
||||||
|
[presets]
|
||||||
|
print = 0.40mm GOTTAGOFAST 0.6 nozzle MK3
|
||||||
|
filament = Generic PLA
|
||||||
|
printer = Original Prusa i3 MK3 0.6 nozzle
|
||||||
|
|
||||||
|
[Vendor:PrusaResearch]
|
||||||
|
version = 0.1.9
|
||||||
|
min_slic3r_version = 0.0.0
|
||||||
|
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||||
|
model_MK3 = 0.4;0.6
|
||||||
1091
Slic3rPE/snapshots/20180713T123122Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
1091
Slic3rPE/snapshots/20180713T123122Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
File diff suppressed because it is too large
Load diff
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:40:51
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 60
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 3
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 0
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 215
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 45
|
||||||
|
min_fan_speed = 20
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 215
|
||||||
33
Slic3rPE/snapshots/20180723T134958Z/filament/Real - PLA.ini
Normal file
33
Slic3rPE/snapshots/20180723T134958Z/filament/Real - PLA.ini
Normal file
|
|
@ -0,0 +1,33 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-14 at 20:59:15
|
||||||
|
bed_temperature = 55
|
||||||
|
bridge_fan_speed = 100
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
cooling = 1
|
||||||
|
disable_fan_first_layers = 1
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
fan_always_on = 1
|
||||||
|
fan_below_layer_time = 60
|
||||||
|
filament_colour = #29B2B2
|
||||||
|
filament_cost = 0
|
||||||
|
filament_density = 0
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
first_layer_bed_temperature = 65
|
||||||
|
first_layer_temperature = 200
|
||||||
|
inherits =
|
||||||
|
max_fan_speed = 100
|
||||||
|
min_fan_speed = 100
|
||||||
|
min_print_speed = 10
|
||||||
|
slowdown_below_layer_time = 10
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
temperature = 200
|
||||||
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-14 at 20:59:07
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 4
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 35
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.2
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 200
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.2
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 45
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 200
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 60%
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 5
|
||||||
|
travel_speed = 100
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-19 at 11:40:32
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 2
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 50
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 15%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.2
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 200
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 80
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 200
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 60%
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 200
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-13 at 14:55:26
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 1000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
bridge_speed = 30
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 1000
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0.61
|
||||||
|
external_perimeter_speed = 35
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 0
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0.67
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 1000
|
||||||
|
first_layer_extrusion_width = 0.65
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 30
|
||||||
|
gap_fill_speed = 40
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 1500
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0.7
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 100
|
||||||
|
inherits = 0.20mm FAST 0.6 nozzle MK3
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 200
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 4
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 800
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0.65
|
||||||
|
perimeter_speed = 45
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 5
|
||||||
|
resolution = 0
|
||||||
|
seam_position = nearest
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 3
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 25
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0.65
|
||||||
|
solid_infill_speed = 10
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_speed = 50
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 5
|
||||||
|
thin_walls = 0
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0.6
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 100
|
||||||
|
wipe_tower = 1
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180723T134958Z/print/Course - HyperCube.ini
Normal file
107
Slic3rPE/snapshots/20180723T134958Z/print/Course - HyperCube.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-23 at 12:43:39
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = HyperCube
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 2
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180723T134958Z/print/Course - M200.ini
Normal file
107
Slic3rPE/snapshots/20180723T134958Z/print/Course - M200.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:17
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 0
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers = "Malyan M200"
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.21875
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 60
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.21875
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 60
|
||||||
|
perimeters = 3
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 5
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 40
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 0
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 4
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 40
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 120
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
107
Slic3rPE/snapshots/20180723T134958Z/print/My Settings.ini
Normal file
107
Slic3rPE/snapshots/20180723T134958Z/print/My Settings.ini
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-13 at 15:14:56
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
bridge_acceleration = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_flow_ratio = 1
|
||||||
|
bridge_speed = 40
|
||||||
|
brim_width = 5
|
||||||
|
clip_multipart_objects = 0
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition =
|
||||||
|
complete_objects = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
dont_support_bridges = 1
|
||||||
|
elefant_foot_compensation = 0
|
||||||
|
ensure_vertical_shell_thickness = 0
|
||||||
|
external_fill_pattern = rectilinear
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_speed = 50%
|
||||||
|
external_perimeters_first = 0
|
||||||
|
extra_perimeters = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extrusion_width = 0
|
||||||
|
fill_angle = 45
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = grid
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_extrusion_width = 200%
|
||||||
|
first_layer_height = 0.4
|
||||||
|
first_layer_speed = 15
|
||||||
|
gap_fill_speed = 20
|
||||||
|
gcode_comments = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 25%
|
||||||
|
infill_speed = 40
|
||||||
|
inherits =
|
||||||
|
interface_shells = 0
|
||||||
|
layer_height = 0.4
|
||||||
|
max_print_speed = 40
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
max_volumetric_speed = 0
|
||||||
|
min_skirt_length = 0
|
||||||
|
notes =
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base].gcode
|
||||||
|
overhangs = 1
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_speed = 40
|
||||||
|
perimeters = 2
|
||||||
|
post_process =
|
||||||
|
print_settings_id =
|
||||||
|
raft_layers = 0
|
||||||
|
resolution = 0
|
||||||
|
seam_position = aligned
|
||||||
|
skirt_distance = 6
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 1
|
||||||
|
small_perimeter_speed = 15
|
||||||
|
solid_infill_below_area = 70
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
solid_infill_speed = 30
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
support_material = 1
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_buildplate_only = 1
|
||||||
|
support_material_contact_distance = 0.2
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 0
|
||||||
|
support_material_interface_spacing = 0
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 2.5
|
||||||
|
support_material_speed = 40
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 0
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 1
|
||||||
|
thin_walls = 1
|
||||||
|
threads = 8
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
top_solid_infill_speed = 30
|
||||||
|
top_solid_layers = 3
|
||||||
|
travel_speed = 600
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
xy_size_compensation = 0
|
||||||
50
Slic3rPE/snapshots/20180723T134958Z/printer/HyperCube.ini
Normal file
50
Slic3rPE/snapshots/20180723T134958Z/printer/HyperCube.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:29
|
||||||
|
bed_shape = 0x0,300x0,300x200,0x200
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = repetier
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.4
|
||||||
|
max_print_height = 200
|
||||||
|
min_layer_height = 0.16
|
||||||
|
nozzle_diameter = 0.6
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.6
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.5
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 35
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F500 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n; Begin printing.G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
50
Slic3rPE/snapshots/20180723T134958Z/printer/Malyan M200.ini
Normal file
50
Slic3rPE/snapshots/20180723T134958Z/printer/Malyan M200.ini
Normal file
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-02 at 11:01:10
|
||||||
|
bed_shape = 0x0,120x0,120x120,0x120
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile =
|
||||||
|
default_print_profile =
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y120 ; present bed\nM84 XY ; disable motors\n
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = marlin
|
||||||
|
inherits =
|
||||||
|
layer_gcode =
|
||||||
|
max_layer_height = 0.30625
|
||||||
|
max_print_height = 115
|
||||||
|
min_layer_height = 0.0875
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 3
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 50
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y0 Z0.2 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n\n; Begin printing.\n
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 0
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
z_offset = 0
|
||||||
|
|
@ -0,0 +1,50 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-19 at 18:35:07
|
||||||
|
bed_shape = 0x0,250x0,250x210,0x210
|
||||||
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||||
|
between_objects_gcode =
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile = "Prusa PLA"
|
||||||
|
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||||
|
deretract_speed = 0
|
||||||
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X125 Y200 Z{max_print_height}\nM84 ; disable motors
|
||||||
|
extruder_colour = #FFFF00
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = marlin
|
||||||
|
inherits = Original Prusa i3 MK3 0.6 nozzle
|
||||||
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||||
|
max_layer_height = 0.35
|
||||||
|
max_print_height = 210
|
||||||
|
min_layer_height = 0.1
|
||||||
|
nozzle_diameter = 0.6
|
||||||
|
octoprint_apikey =
|
||||||
|
octoprint_cafile =
|
||||||
|
octoprint_host =
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
printer_model = MK3
|
||||||
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
|
printer_settings_id =
|
||||||
|
printer_variant = 0.6
|
||||||
|
printer_vendor =
|
||||||
|
retract_before_travel = 1
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 1
|
||||||
|
retract_length = 0.8
|
||||||
|
retract_length_toolchange = 4
|
||||||
|
retract_lift = 0.6
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 209
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 35
|
||||||
|
serial_port =
|
||||||
|
serial_speed = 250000
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = M115 U3.3.0 ; tell printer latest fw version\nM201 X1000 Y1000 Z1000 E9000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X8 Y8 Z0.4 E1.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||||
|
toolchange_gcode =
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 1
|
||||||
|
z_offset = 0
|
||||||
19
Slic3rPE/snapshots/20180723T134958Z/snapshot.ini
Normal file
19
Slic3rPE/snapshots/20180723T134958Z/snapshot.ini
Normal file
|
|
@ -0,0 +1,19 @@
|
||||||
|
# generated by Slic3r Prusa Edition 1.40.1 on 2018-07-23 at 16:49:58
|
||||||
|
|
||||||
|
[snapshot]
|
||||||
|
id = 20180723T134958Z
|
||||||
|
time_captured = 20180723T134958Z
|
||||||
|
slic3r_version_captured = 1.40.1
|
||||||
|
comment =
|
||||||
|
reason = upgrade
|
||||||
|
|
||||||
|
[presets]
|
||||||
|
print = 0.40mm FAST 0.6 nozzle MK3 own
|
||||||
|
filament = Real - PLA
|
||||||
|
printer = Original Prusa i3 MK3 0.6 nozzle own
|
||||||
|
|
||||||
|
[Vendor:PrusaResearch]
|
||||||
|
version = 0.1.10
|
||||||
|
min_slic3r_version = 0.0.0
|
||||||
|
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||||
|
model_MK3 = 0.4;0.6
|
||||||
1091
Slic3rPE/snapshots/20180723T134958Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
1091
Slic3rPE/snapshots/20180723T134958Z/vendor/PrusaResearch.ini
generated
vendored
Normal file
File diff suppressed because it is too large
Load diff
43
Slic3rPE/vendor/PrusaResearch.ini
generated
vendored
43
Slic3rPE/vendor/PrusaResearch.ini
generated
vendored
|
|
@ -5,7 +5,7 @@
|
||||||
name = Prusa Research
|
name = Prusa Research
|
||||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||||
config_version = 0.1.6
|
config_version = 0.1.11
|
||||||
# Where to get the updates from?
|
# Where to get the updates from?
|
||||||
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
||||||
|
|
||||||
|
|
@ -140,7 +140,7 @@ infill_extrusion_width = 0.25
|
||||||
perimeter_extrusion_width = 0.25
|
perimeter_extrusion_width = 0.25
|
||||||
solid_infill_extrusion_width = 0.25
|
solid_infill_extrusion_width = 0.25
|
||||||
top_infill_extrusion_width = 0.25
|
top_infill_extrusion_width = 0.25
|
||||||
support_material_extrusion_width = 0.18
|
support_material_extrusion_width = 0.2
|
||||||
support_material_interface_layers = 0
|
support_material_interface_layers = 0
|
||||||
support_material_interface_spacing = 0.15
|
support_material_interface_spacing = 0.15
|
||||||
support_material_spacing = 1
|
support_material_spacing = 1
|
||||||
|
|
@ -155,6 +155,7 @@ infill_extrusion_width = 0.7
|
||||||
perimeter_extrusion_width = 0.65
|
perimeter_extrusion_width = 0.65
|
||||||
solid_infill_extrusion_width = 0.65
|
solid_infill_extrusion_width = 0.65
|
||||||
top_infill_extrusion_width = 0.6
|
top_infill_extrusion_width = 0.6
|
||||||
|
support_material_extrusion_width = 0.55
|
||||||
|
|
||||||
[print:*soluble_support*]
|
[print:*soluble_support*]
|
||||||
overhangs = 1
|
overhangs = 1
|
||||||
|
|
@ -211,28 +212,20 @@ fill_pattern = grid
|
||||||
top_infill_extrusion_width = 0.4
|
top_infill_extrusion_width = 0.4
|
||||||
|
|
||||||
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
||||||
inherits = *0.05mm*
|
inherits = *0.05mm*; *0.25nozzle*
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||||
external_perimeter_extrusion_width = 0
|
|
||||||
extrusion_width = 0.28
|
|
||||||
fill_density = 20%
|
fill_density = 20%
|
||||||
first_layer_extrusion_width = 0.3
|
|
||||||
infill_extrusion_width = 0
|
|
||||||
infill_speed = 20
|
infill_speed = 20
|
||||||
max_print_speed = 100
|
max_print_speed = 100
|
||||||
perimeter_extrusion_width = 0
|
|
||||||
perimeter_speed = 20
|
perimeter_speed = 20
|
||||||
small_perimeter_speed = 15
|
small_perimeter_speed = 15
|
||||||
solid_infill_extrusion_width = 0
|
|
||||||
solid_infill_speed = 20
|
solid_infill_speed = 20
|
||||||
support_material_speed = 20
|
support_material_speed = 20
|
||||||
top_infill_extrusion_width = 0
|
|
||||||
|
|
||||||
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
||||||
inherits = *0.05mm*; *0.25nozzle*
|
inherits = *0.05mm*; *0.25nozzle*
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||||
fill_pattern = grid
|
fill_pattern = grid
|
||||||
top_infill_extrusion_width = 0.4
|
|
||||||
|
|
||||||
# XXXXXXXXXXXXXXXXXXXX
|
# XXXXXXXXXXXXXXXXXXXX
|
||||||
# XXX--- 0.10mm ---XXX
|
# XXX--- 0.10mm ---XXX
|
||||||
|
|
@ -271,7 +264,7 @@ top_infill_extrusion_width = 0.4
|
||||||
top_solid_infill_speed = 50
|
top_solid_infill_speed = 50
|
||||||
|
|
||||||
[print:0.10mm DETAIL 0.25 nozzle]
|
[print:0.10mm DETAIL 0.25 nozzle]
|
||||||
inherits = *0.10mm*
|
inherits = *0.10mm*; *0.25nozzle*
|
||||||
bridge_acceleration = 600
|
bridge_acceleration = 600
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
||||||
external_perimeter_speed = 20
|
external_perimeter_speed = 20
|
||||||
|
|
@ -284,7 +277,7 @@ solid_infill_speed = 40
|
||||||
top_solid_infill_speed = 30
|
top_solid_infill_speed = 30
|
||||||
|
|
||||||
[print:0.10mm DETAIL 0.25 nozzle MK3]
|
[print:0.10mm DETAIL 0.25 nozzle MK3]
|
||||||
inherits = *0.10mm*
|
inherits = *0.10mm*; *0.25nozzle*
|
||||||
bridge_speed = 30
|
bridge_speed = 30
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
||||||
external_perimeter_speed = 35
|
external_perimeter_speed = 35
|
||||||
|
|
@ -294,11 +287,10 @@ infill_speed = 200
|
||||||
max_print_speed = 200
|
max_print_speed = 200
|
||||||
perimeter_speed = 45
|
perimeter_speed = 45
|
||||||
solid_infill_speed = 200
|
solid_infill_speed = 200
|
||||||
top_infill_extrusion_width = 0.4
|
|
||||||
top_solid_infill_speed = 50
|
top_solid_infill_speed = 50
|
||||||
|
|
||||||
[print:0.10mm DETAIL 0.6 nozzle MK3]
|
[print:0.10mm DETAIL 0.6 nozzle MK3]
|
||||||
inherits = *0.10mm*
|
inherits = *0.10mm*; *0.6nozzle*
|
||||||
bridge_speed = 30
|
bridge_speed = 30
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
external_perimeter_speed = 35
|
external_perimeter_speed = 35
|
||||||
|
|
@ -308,7 +300,6 @@ infill_speed = 200
|
||||||
max_print_speed = 200
|
max_print_speed = 200
|
||||||
perimeter_speed = 45
|
perimeter_speed = 45
|
||||||
solid_infill_speed = 200
|
solid_infill_speed = 200
|
||||||
top_infill_extrusion_width = 0.4
|
|
||||||
top_solid_infill_speed = 50
|
top_solid_infill_speed = 50
|
||||||
|
|
||||||
# XXXXXXXXXXXXXXXXXXXX
|
# XXXXXXXXXXXXXXXXXXXX
|
||||||
|
|
@ -358,7 +349,6 @@ perimeter_acceleration = 600
|
||||||
perimeter_speed = 25
|
perimeter_speed = 25
|
||||||
small_perimeter_speed = 15
|
small_perimeter_speed = 15
|
||||||
solid_infill_speed = 40
|
solid_infill_speed = 40
|
||||||
support_material_extrusion_width = 0.2
|
|
||||||
top_solid_infill_speed = 30
|
top_solid_infill_speed = 30
|
||||||
|
|
||||||
[print:0.15mm OPTIMAL 0.6 nozzle]
|
[print:0.15mm OPTIMAL 0.6 nozzle]
|
||||||
|
|
@ -398,7 +388,7 @@ support_material_with_sheath = 0
|
||||||
support_material_xy_spacing = 80%
|
support_material_xy_spacing = 80%
|
||||||
|
|
||||||
[print:0.15mm OPTIMAL 0.25 nozzle MK3]
|
[print:0.15mm OPTIMAL 0.25 nozzle MK3]
|
||||||
inherits = *0.15mm*
|
inherits = *0.15mm*; *0.25nozzle*
|
||||||
bridge_speed = 30
|
bridge_speed = 30
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
||||||
external_perimeter_speed = 35
|
external_perimeter_speed = 35
|
||||||
|
|
@ -424,7 +414,7 @@ top_infill_extrusion_width = 0.4
|
||||||
top_solid_layers = 5
|
top_solid_layers = 5
|
||||||
|
|
||||||
[print:0.15mm OPTIMAL 0.6 nozzle MK3]
|
[print:0.15mm OPTIMAL 0.6 nozzle MK3]
|
||||||
inherits = *0.15mm*
|
inherits = *0.15mm*; *0.6nozzle*
|
||||||
bridge_speed = 30
|
bridge_speed = 30
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
external_perimeter_speed = 35
|
external_perimeter_speed = 35
|
||||||
|
|
@ -491,7 +481,7 @@ support_material_with_sheath = 0
|
||||||
support_material_xy_spacing = 80%
|
support_material_xy_spacing = 80%
|
||||||
|
|
||||||
[print:0.20mm FAST 0.6 nozzle MK3]
|
[print:0.20mm FAST 0.6 nozzle MK3]
|
||||||
inherits = *0.20mm*
|
inherits = *0.20mm*; *0.6nozzle*
|
||||||
bridge_speed = 30
|
bridge_speed = 30
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
||||||
external_perimeter_speed = 35
|
external_perimeter_speed = 35
|
||||||
|
|
@ -544,7 +534,6 @@ external_perimeter_extrusion_width = 0.6
|
||||||
external_perimeter_speed = 30
|
external_perimeter_speed = 30
|
||||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||||
perimeter_speed = 40
|
perimeter_speed = 40
|
||||||
support_material_extrusion_width = 0.55
|
|
||||||
support_material_interface_layers = 3
|
support_material_interface_layers = 3
|
||||||
support_material_xy_spacing = 120%
|
support_material_xy_spacing = 120%
|
||||||
top_infill_extrusion_width = 0.57
|
top_infill_extrusion_width = 0.57
|
||||||
|
|
@ -1064,7 +1053,7 @@ end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
retract_lift_below = 209
|
retract_lift_below = 209
|
||||||
max_print_height = 210
|
max_print_height = 210
|
||||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
start_gcode = M115 U3.3.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z1000 E9000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X8 Y8 Z0.4 E1.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||||
printer_model = MK3
|
printer_model = MK3
|
||||||
default_print_profile = 0.15mm OPTIMAL MK3
|
default_print_profile = 0.15mm OPTIMAL MK3
|
||||||
|
|
||||||
|
|
@ -1074,8 +1063,10 @@ nozzle_diameter = 0.25
|
||||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
retract_lift_below = 209
|
retract_lift_below = 209
|
||||||
|
max_layer_height = 0.1
|
||||||
|
min_layer_height = 0.05
|
||||||
max_print_height = 210
|
max_print_height = 210
|
||||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
start_gcode = M115 U3.3.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z1000 E9000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X8 Y8 Z0.4 E1.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||||
printer_model = MK3
|
printer_model = MK3
|
||||||
printer_variant = 0.25
|
printer_variant = 0.25
|
||||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||||
|
|
@ -1086,8 +1077,10 @@ nozzle_diameter = 0.6
|
||||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
retract_lift_below = 209
|
retract_lift_below = 209
|
||||||
|
max_layer_height = 0.35
|
||||||
|
min_layer_height = 0.1
|
||||||
max_print_height = 210
|
max_print_height = 210
|
||||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
start_gcode = M115 U3.3.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z1000 E9000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X8 Y8 Z0.4 E1.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||||
printer_model = MK3
|
printer_model = MK3
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||||
|
|
@ -1095,4 +1088,4 @@ default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||||
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
||||||
[obsolete_presets]
|
[obsolete_presets]
|
||||||
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3"
|
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3"
|
||||||
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue