slic3rpe: Tweak some M200 settings

Slic3rPE/print/Course - M200.ini

@@ -1,11 +1,11 @@
-# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:33:38
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-04 at 22:39:17
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_angle = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
-brim_width = 5
+brim_width = 0
 clip_multipart_objects = 0
 compatible_printers = "Malyan M200"
 compatible_printers_condition = 
@@ -13,7 +13,7 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
+ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 50%
@@ -27,7 +27,7 @@ fill_density = 20%
 fill_pattern = grid
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.2625
+first_layer_height = 0.21875
 first_layer_speed = 15
 gap_fill_speed = 20
 gcode_comments = 0
@@ -38,10 +38,10 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 40
+infill_speed = 60
 inherits = 
 interface_shells = 0
-layer_height = 0.2625
+layer_height = 0.21875
 max_print_speed = 40
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
@@ -55,25 +55,25 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 40
+perimeter_speed = 60
 perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
 resolution = 0
 seam_position = aligned
-skirt_distance = 6
+skirt_distance = 2
 skirt_height = 1
-skirts = 1
+skirts = 5
 small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 30
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 1
+support_material = 0
 support_material_angle = 0
 support_material_buildplate_only = 1
 support_material_contact_distance = 0.2
@@ -93,11 +93,11 @@ support_material_threshold = 0
 support_material_with_sheath = 0
 support_material_xy_spacing = 1
 thin_walls = 1
-threads = 8
+threads = 4
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 30
+top_solid_infill_speed = 40
 top_solid_layers = 3
-travel_speed = 600
+travel_speed = 120
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/printer/Malyan M200.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:30:44
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-02 at 11:01:10
 bed_shape = 0x0,120x0,120x120,0x120
 before_layer_gcode = 
 between_objects_gcode = 
@@ -7,7 +7,7 @@ cooling_tube_retraction = 91.5
 default_filament_profile = 
 default_print_profile = 
 deretract_speed = 0
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nG1 Y120 ; present bed\nM84 XY     ; disable motors\n
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nG1 Y120 ; present bed\nM84 XY     ; disable motors\n
 extruder_colour = ""
 extruder_offset = 0x0
 gcode_flavor = marlin
@@ -31,7 +31,7 @@ retract_before_wipe = 0%
 retract_layer_change = 0
 retract_length = 3
 retract_length_toolchange = 10
-retract_lift = 0.2
+retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
@@ -40,7 +40,7 @@ retract_speed = 50
 serial_port = 
 serial_speed = 250000
 single_extruder_multi_material = 0
-start_gcode = G90                             ; Explicitly force absolute positioning in case it was not reset previously.\nG28     ; Home all axes.\nG29     ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000    ; Move to the front-left part of the bed.\nG92 E0      ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0      ; Zero the extruder minus restart offset\nG1 E-1.0 F500   ; Retract 1 mm.\nG1 X80 Y20 F9000    ; Sweep right to cut any strings.\n\n; Begin printing.\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+start_gcode = G90                             ; Explicitly force absolute positioning in case it was not reset previously.\nG28     ; Home all axes.\nG29     ; Auto-level the bed.\nG0 X0 Y0 Z0.2 F9000    ; Move to the front-left part of the bed.\nG92 E0      ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0      ; Zero the extruder minus restart offset\nG1 E-1.0 F500   ; Retract 1 mm.\nG1 X80 Y20 F9000    ; Sweep right to cut any strings.\n\n; Begin printing.\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0