slic3rpe: Update profiles

Slic3rPE/filament/PLA.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:31:45
+bed_temperature = 55
+bridge_fan_speed = 60
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unloading_speed = 90
+first_layer_bed_temperature = 65
+first_layer_temperature = 190
+inherits = 
+max_fan_speed = 45
+min_fan_speed = 20
+min_print_speed = 10
+slowdown_below_layer_time = 20
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

Slic3rPE/print/Course - HyperCube.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-23 at 12:43:39
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 5
+clip_multipart_objects = 0
+compatible_printers = HyperCube
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 15
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 40
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 0
+support_material_xy_spacing = 1
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+top_solid_layers = 3
+travel_speed = 600
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/Course - M200.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:33:38
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 5
+clip_multipart_objects = 0
+compatible_printers = "Malyan M200"
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.2625
+first_layer_speed = 15
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.2625
+max_print_speed = 40
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 0
+support_material_xy_spacing = 1
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+top_solid_layers = 3
+travel_speed = 600
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/printer/HyperCube.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-13 at 14:58:55
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:27:46
 bed_shape = 0x0,300x0,300x200,0x200
 before_layer_gcode = 
 between_objects_gcode = 

Slic3rPE/printer/Malyan M200.ini

@@ -0,0 +1,50 @@
+# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:30:44
+bed_shape = 0x0,120x0,120x120,0x120
+before_layer_gcode = 
+between_objects_gcode = 
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nG1 Y120 ; present bed\nM84 XY     ; disable motors\n
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+inherits = 
+layer_gcode = 
+max_layer_height = 0.30625
+max_print_height = 115
+min_layer_height = 0.0875
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_cafile = 
+octoprint_host = 
+parking_pos_retraction = 92
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_variant = 
+printer_vendor = 
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = G90                             ; Explicitly force absolute positioning in case it was not reset previously.\nG28     ; Home all axes.\nG29     ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000    ; Move to the front-left part of the bed.\nG92 E0      ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0      ; Zero the extruder minus restart offset\nG1 E-1.0 F500   ; Retract 1 mm.\nG1 X80 Y20 F9000    ; Sweep right to cut any strings.\n\n; Begin printing.\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0