1
0
Fork 0
qmk_firmware/keyboards/jm60/rules.mk

61 lines
1.8 KiB
Makefile
Raw Normal View History

# project specific files
SRC = matrix.c \
led.c
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F1xx
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
MCU_LDSCRIPT = jm60_bootloader
# Startup code to use
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f1xx
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = JM60_BOARD
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
MCU = cortex-m3
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
ARMV = 7
# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
OPT_DEFS =
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = yes # Custom matrix file
BACKLIGHT_ENABLE = no
VISUALIZER_ENABLE = no
#LED_DRIVER = is31fl3731c
#LED_WIDTH = 16
#LED_HEIGHT = 5
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE