1
0
Fork 0
qmk_firmware/lib/lufa/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c

269 lines
7.7 KiB
C
Raw Normal View History

/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Still Image Device commands, to issue PIMA commands to the device for
* reading device status, capacity, and other characteristics as well as
* reading and writing of stored image data.
*/
#include "StillImageCommands.h"
/** PIMA block container for the block to send to the device */
PIMA_Container_t PIMA_SendBlock;
/** PIMA block container for the last received block from the device */
PIMA_Container_t PIMA_ReceivedBlock;
/** PIMA block container for the last event block received from the device */
PIMA_Container_t PIMA_EventBlock;
/** Function to send the PIMA command container to the attached still image device. */
void SImage_SendBlockHeader(void)
{
/* Unfreeze the data OUT pipe ready for data transmission */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the PIMA block to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0), NULL);
/* If the block type is a command, send its parameters (if any) */
if (PIMA_SendBlock.Type == PIMA_CONTAINER_CommandBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if any parameters in the command block */
if (ParamBytes)
{
/* Write the PIMA parameters to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes, NULL);
}
/* Send the PIMA command block to the attached device */
Pipe_ClearOUT();
}
/* Freeze pipe after use */
Pipe_Freeze();
}
/** Function to receive a PIMA event container from the attached still image device.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReceiveEventHeader(void)
{
uint8_t ErrorCode;
/* Unfreeze the events pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* Read in the event data into the global structure */
ErrorCode = Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock), NULL);
/* Clear the pipe after read complete to prepare for next event */
Pipe_ClearIN();
/* Freeze the event pipe again after use */
Pipe_Freeze();
return ErrorCode;
}
/** Function to receive a PIMA response container from the attached still image device.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReceiveBlockHeader(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received on the IN pipe */
while (!(Pipe_IsINReceived()))
{
uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
/* Check to see if a new frame has been issued (1ms elapsed) */
if (CurrentFrameNumber != PreviousFrameNumber)
{
/* Save the new frame number and decrement the timeout period */
PreviousFrameNumber = CurrentFrameNumber;
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
return PIPE_RWSTREAM_Timeout;
}
Pipe_Freeze();
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
/* Return error code and break out of the loop */
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_Freeze();
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
/* Return error code */
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (USB_HostState == HOST_STATE_Unattached)
return PIPE_RWSTREAM_DeviceDisconnected;
}
/* Load in the response from the attached device */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0), NULL);
/* Check if the returned block type is a response block */
if (PIMA_ReceivedBlock.Type == PIMA_CONTAINER_ResponseBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if the device has returned any parameters */
if (ParamBytes)
{
/* Read the PIMA parameters from the data IN pipe */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes, NULL);
}
/* Clear pipe bank after use */
Pipe_ClearIN();
}
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Function to send the given data to the device, after a command block has been issued.
*
* \param[in] Buffer Source data buffer to send to the device
* \param[in] Bytes Number of bytes to send
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_SendData(void* const Buffer,
const uint16_t Bytes)
{
uint8_t ErrorCode;
/* Unfreeze the data OUT pipe */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the data contents to the pipe */
ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes, NULL);
/* Send the last packet to the attached device */
Pipe_ClearOUT();
/* Freeze the pipe again after use */
Pipe_Freeze();
return ErrorCode;
}
/** Function to receive the given data from the device, after a response block has been received.
*
* \param[out] Buffer Destination data buffer to put read bytes from the device
* \param[in] Bytes Number of bytes to receive
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReadData(void* const Buffer,
const uint16_t Bytes)
{
uint8_t ErrorCode;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Read in the data into the buffer */
ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL);
/* Freeze the pipe again after use */
Pipe_Freeze();
return ErrorCode;
}
/** Function to test if a PIMA event block is waiting to be read in from the attached device.
*
* \return True if an event is waiting to be read in from the device, \c false otherwise
*/
bool SImage_IsEventReceived(void)
{
bool IsEventReceived = false;
/* Unfreeze the Event pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* If the pipe contains data, an event has been received */
if (Pipe_BytesInPipe())
IsEventReceived = true;
/* Freeze the pipe after use */
Pipe_Freeze();
return IsEventReceived;
}