_/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/users/bcat/config.h

67 lines
1.8 KiB
C
Raw Normal View History

[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
/* Wait between tap_code register and unregister to fix flaky media keys. */
[Keymap] Set a short TAP_CODE_DELAY so media keys work (#6097) A delay of 10ms seems sufficient. Otherwise, media keys tapped from the encoder of my BDN9 macropad only seem to get picked up by the OS (Windows 10) some of the time.
2019-06-07 19:58:23 +00:00
#undef TAP_CODE_DELAY
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#define TAP_CODE_DELAY 20
[Keymap] Set a short TAP_CODE_DELAY so media keys work (#6097) A delay of 10ms seems sufficient. Otherwise, media keys tapped from the encoder of my BDN9 macropad only seem to get picked up by the OS (Windows 10) some of the time.
2019-06-07 19:58:23 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#if defined(RGBLIGHT_ENABLE)
/* Turn off RGB underglow when the host goes to sleep. */
#define RGBLIGHT_SLEEP
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
/* Keep RGB underglow level increments consistent across keyboards. */
#undef RGBLIGHT_HUE_STEP
#undef RGBLIGHT_SAT_STEP
#undef RGBLIGHT_VAL_STEP
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#if defined(BACKLIGHT_ENABLE)
/* Enable backlight breathing across the board. */
#define BACKLIGHT_BREATHING
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
/* Keep backlight level increments consistent across keyboards. */
#undef BACKLIGHT_LEVELS
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#define BACKLIGHT_LEVELS 7
#endif
[Keymap] Switch Quefrency keymap from I2C back to serial; factor common configs into userspace (#5951) * Switch Quefrency from flaky I2C back to serial * Lower mouse wheel speed on Quefrency slightly * Migrate common settings to userspace * Enable Bootmagic Lite for consistent reset to bootloader. * Turn off some undesired features across all keyboards. * Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite also does an EEPROM reset. * Set backlight and underglow increments consistently across all keyboards since lots of them like to override the deafults. * Set mouse keys consistently across all keyboards. * Update function layer keymap images
2019-05-23 04:08:48 +00:00
[Keymap] Assorted personal keymap/userspace updates (#6691) * Turn off more unnecessary features by default * Double TAP_CODE_DELAY due to more media key issues Even with this change, some of the rotary encoder turns on my BDN9's volume knob still seem to get dropped. It's possible there's something wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes QMK to miss an encoder turn? Unclear.) The other knob (backlight brightness) works fine, FWIW.... * Restructure userspace config.h a bit * Hack around Instant60 Via EEPROM conflict Remove this when #6589 is fixed for Via boards. * Add backlight breathing and (EEPROM) reset to BDN9 * Add keymap for 9-Key macropad
2019-09-07 15:58:17 +00:00
#if defined(MOUSEKEY_ENABLE)
/* Make mouse operation smoother. */
#undef MOUSEKEY_DELAY
#undef MOUSEKEY_INTERVAL
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_INTERVAL 16
/* Lower mouse speed to adjust for reduced MOUSEKEY_INTERVAL. */
#undef MOUSEKEY_MAX_SPEED
#undef MOUSEKEY_TIME_TO_MAX
#undef MOUSEKEY_WHEEL_MAX_SPEED
#undef MOUSEKEY_WHEEL_TIME_TO_MAX
#define MOUSEKEY_MAX_SPEED 7
#define MOUSEKEY_TIME_TO_MAX 150
#define MOUSEKEY_WHEEL_MAX_SPEED 3
#define MOUSEKEY_WHEEL_TIME_TO_MAX 150
#endif
#if defined(KEYBOARD_cannonkeys_instant60)
/*
* Work around EEPROM incompatibility with VIA:
* https://github.com/qmk/qmk_firmware/issues/6589#issuecomment-524042457.
*/
#undef EEPROM_MAGIC_ADDR
#undef EEPROM_VERSION_ADDR
#undef DYNAMIC_KEYMAP_EEPROM_ADDR
#undef EEPROM_CUSTOM_BACKLIGHT
#undef DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
#define EEPROM_MAGIC_ADDR 34
#define EEPROM_VERSION_ADDR 36
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
#define EEPROM_CUSTOM_BACKLIGHT 637
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 638
#endif
Copy permalink