1
0
Fork 0
qmk_firmware/keyboards/crkbd/keymaps/omgvee/keymap.c

244 lines
8.7 KiB
C
Raw Normal View History

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
#define KC_ERST EEPROM_RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_SFCPS SFT_T(KC_CAPS)
#define KC_CTLTB CTL_T(KC_TAB)
#define KC_GUIEI GUI_T(KC_LANG2)
#define KC_ALTKN ALT_T(KC_LANG1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, DEL,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, BSLS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, XXXXX, VOLD, VOLU, MUTE, MPLY, UNDS, PLUS, LBRC, RBRC, SLSH, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, ERST, MNXT, MPRV, MFFD, MRWD, XXXXX, EJCT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, PGUP, HOME, LEFT, DOWN, UP, RIGHT, XXXXX, INS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, PGDN, END, BRID, BRIU, VOLD, VOLU, MUTE, MPLY,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}