1
0
Fork 0
qmk_firmware/FAQ.md

39 lines
1.2 KiB
Markdown
Raw Normal View History

2014-03-01 20:12:59 +00:00
# Build
## 'make clean' needs after changing config.h
2014-03-01 20:13:29 +00:00
To build with new **config.h** you need
2014-03-01 20:12:59 +00:00
$ make clean
2014-03-01 01:42:00 +00:00
# Degug Console
2014-03-01 02:07:46 +00:00
## hid_listen can't find device
2014-03-01 01:42:00 +00:00
When debug console of your device is not ready you will see like this:
Waiting for device:.........
2014-03-01 02:07:46 +00:00
once the device is pluged in then *hid_listen* finds it you will get this message:
2014-03-01 01:42:00 +00:00
Waiting for new device:.........................
Listening:
2014-03-01 02:07:46 +00:00
Check if you can't get this 'Listening:' message:
- build with `CONSOLE_ENABLE=yes` in **Makefile**.
2014-03-01 01:42:00 +00:00
2014-03-01 02:07:46 +00:00
## Can't get message from console
Check:
2014-03-01 02:09:22 +00:00
- connect the device to *hid_listen*. See above.
2014-03-01 02:07:46 +00:00
- push **LShift+RShift+d** to enable debug. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
2014-03-01 02:09:22 +00:00
- set `debug_enable=yes` usually in `matrix_init()` in **matrix.c**.
2014-03-01 02:07:46 +00:00
- try using 'print' function instead of debug print. See **common/print.h**.
2014-03-01 02:09:22 +00:00
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
2014-03-01 02:07:46 +00:00
***
2014-03-01 01:42:00 +00:00
# NKRO
2014-03-01 20:34:51 +00:00
# PS/2 mouse support
## TrackPoint needs reset circuit
Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware.
http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447