Added bluefruit protocol and converter for 70% M
This commit is contained in:
Benjamin Gould
parent
c18c52f551
commit
05792e2b83
10 changed files with 1159 additions and 0 deletions
113
converter/terminal_bluefruit/Makefile
Normal file
113
converter/terminal_bluefruit/Makefile
Normal file
|
|
@ -0,0 +1,113 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = terminal_bluefruit
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
BLUEFRUIT_TRACE_SERIAL=true
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
|
||||
#
|
||||
# PS/2 protocol implementations
|
||||
# USART is recommended if it is available, others are for reference purpose.
|
||||
# INT implementation will drop simultaneous key strokes.
|
||||
#
|
||||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
||||
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
|
||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
||||
|
||||
ifdef PS2_USE_USART
|
||||
SRC += protocol/ps2_usart.c
|
||||
OPT_DEFS += -DPS2_USE_USART
|
||||
endif
|
||||
|
||||
ifdef PS2_USE_INT
|
||||
SRC += protocol/ps2.c
|
||||
OPT_DEFS += -DPS2_USE_INT
|
||||
endif
|
||||
|
||||
ifdef PS2_USE_BUSYWAIT
|
||||
SRC += protocol/ps2.c
|
||||
OPT_DEFS += -DPS2_USE_BUSYWAIT
|
||||
endif
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/bluefruit.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
37
converter/terminal_bluefruit/README
Normal file
37
converter/terminal_bluefruit/README
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
Keyboard converter for IBM terminal keyboard
|
||||
============================================
|
||||
It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
|
||||
I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
|
||||
|
||||
Source code: https://github.com/tmk/tmk_keyboard
|
||||
Article: http://geekhack.org/index.php?topic=27272.0
|
||||
|
||||
|
||||
CONNECTION
|
||||
----------
|
||||
Keyboard ATMega32U4
|
||||
----------------------
|
||||
Data: PD2
|
||||
Clock: PD5
|
||||
|
||||
And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
|
||||
|
||||
|
||||
BUILD
|
||||
-----
|
||||
$ git clone https://github.com/tmk/tmk_keyboard.git
|
||||
$ cd converter/terminal_usb
|
||||
$ make
|
||||
|
||||
|
||||
RESOURCE
|
||||
--------
|
||||
Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
|
||||
102keys(1392595): http://geekhack.org/index.php?topic=10737.0
|
||||
122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
|
||||
KbdBabel: http://www.kbdbabel.org/
|
||||
RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
|
||||
DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
|
||||
WinAVR: http://winavr.sourceforge.net/
|
||||
|
||||
EOF
|
||||
112
converter/terminal_bluefruit/config.h
Normal file
112
converter/terminal_bluefruit/config.h
Normal file
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
Converter for 70% IBM Terminal Keyboard
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6535
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
|
||||
#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
|
||||
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 17 // keycode bit: 3-0
|
||||
#define MATRIX_COLS 8 // keycode bit: 6-4
|
||||
|
||||
|
||||
/* legacy keymap support */
|
||||
// #define USE_LEGACY_KEYMAP
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
|
||||
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
|
||||
)
|
||||
|
||||
/* USART configuration
|
||||
* asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
|
||||
*/
|
||||
#ifdef __AVR_ATmega32U4__
|
||||
#define SERIAL_UART_BAUD 9600
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
|
||||
#define SERIAL_UART_RXD_VECT USART1_RX_vect
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
|
||||
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
|
||||
UCSR1B = (1<<TXEN1); /* TX: enable */ \
|
||||
UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
|
||||
(0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
|
||||
sei(); \
|
||||
} while(0)
|
||||
#else
|
||||
# error "USART configuration is needed."
|
||||
#endif
|
||||
|
||||
/*
|
||||
* PS/2 Interrupt configuration
|
||||
*/
|
||||
#ifdef PS2_USE_INT
|
||||
/* uses INT1 for clock line(ATMega32U4) */
|
||||
#define PS2_CLOCK_PORT PORTD
|
||||
#define PS2_CLOCK_PIN PIND
|
||||
#define PS2_CLOCK_DDR DDRD
|
||||
#define PS2_CLOCK_BIT 1
|
||||
|
||||
#define PS2_DATA_PORT PORTD
|
||||
#define PS2_DATA_PIN PIND
|
||||
#define PS2_DATA_DDR DDRD
|
||||
#define PS2_DATA_BIT 0
|
||||
|
||||
#define PS2_INT_INIT() do { \
|
||||
EICRA |= ((1<<ISC11) | \
|
||||
(0<<ISC10)); \
|
||||
} while (0)
|
||||
#define PS2_INT_ON() do { \
|
||||
EIMSK |= (1<<INT1); \
|
||||
} while (0)
|
||||
#define PS2_INT_OFF() do { \
|
||||
EIMSK &= ~(1<<INT1); \
|
||||
} while (0)
|
||||
#define PS2_INT_VECT INT1_vect
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* PS/2 Busywait configuration
|
||||
*/
|
||||
#ifdef PS2_USE_BUSYWAIT
|
||||
#define PS2_CLOCK_PORT PORTD
|
||||
#define PS2_CLOCK_PIN PIND
|
||||
#define PS2_CLOCK_DDR DDRD
|
||||
#define PS2_CLOCK_BIT 1
|
||||
|
||||
#define PS2_DATA_PORT PORTD
|
||||
#define PS2_DATA_PIN PIND
|
||||
#define PS2_DATA_DDR DDRD
|
||||
#define PS2_DATA_BIT 0
|
||||
#endif
|
||||
|
||||
#endif
|
||||
227
converter/terminal_bluefruit/keymap.c
Normal file
227
converter/terminal_bluefruit/keymap.c
Normal file
|
|
@ -0,0 +1,227 @@
|
|||
/*
|
||||
Converter for 70% IBM Terminal Keyboard
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "keycode.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "keymap.h"
|
||||
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
|
||||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
|
||||
* http://www.seasip.info/VintagePC/ibm_1391406.html
|
||||
*
|
||||
* Keymap array:
|
||||
* 8 bytes
|
||||
* +---------+
|
||||
* 0| |
|
||||
* :| | 0x00-0x87
|
||||
* ;| |
|
||||
* 17| |
|
||||
* +---------+
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
|
||||
K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
|
||||
\
|
||||
K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
|
||||
K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
|
||||
K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
|
||||
K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
|
||||
K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
|
||||
) { \
|
||||
{ KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
|
||||
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
|
||||
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
|
||||
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
|
||||
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
|
||||
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
|
||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
|
||||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
|
||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
|
||||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
|
||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
|
||||
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \
|
||||
}
|
||||
|
||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* 0: default
|
||||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
|
||||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
|
||||
* `---' `---------------' `---------------' `---------------' `-----------'
|
||||
* ,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
|
||||
* |-----------------------------------------------------------| |-----------| |---------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
|
||||
* |-----------------------------------------------------------| `-----------' |-----------| +|
|
||||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
|
||||
* |-----------------------------------------------------------| ,---. |---------------|
|
||||
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
|
||||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
|
||||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
|
||||
* `----' `---------------------------------------' `----' `-----------' `---------------'
|
||||
*/
|
||||
/*
|
||||
KEYMAP(
|
||||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
|
||||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
|
||||
|
||||
PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
||||
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
|
||||
PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM,
|
||||
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
|
||||
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
|
||||
),
|
||||
*/
|
||||
/*
|
||||
KEYMAP(
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
|
||||
),
|
||||
*/
|
||||
// pseudo ANSI
|
||||
|
||||
KEYMAP(
|
||||
FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,
|
||||
PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT,
|
||||
|
||||
NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO,
|
||||
NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO,
|
||||
NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO,
|
||||
NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO,
|
||||
NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO
|
||||
),
|
||||
|
||||
// Momentary Function Layer
|
||||
KEYMAP(
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
|
||||
TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS
|
||||
),
|
||||
|
||||
// Mouse Layer
|
||||
KEYMAP(
|
||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO
|
||||
),
|
||||
|
||||
// vi Layer
|
||||
KEYMAP(
|
||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
|
||||
TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO
|
||||
),
|
||||
|
||||
// num lock layer
|
||||
KEYMAP(
|
||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
|
||||
static const uint16_t fn_actions[] PROGMEM = {
|
||||
[0] = ACTION_DEFAULT_LAYER_SET(0),
|
||||
[1] = ACTION_LAYER_MOMENTARY(1),
|
||||
[2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE),
|
||||
[3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE),
|
||||
[4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE),
|
||||
[5] = KC_NO,
|
||||
[6] = KC_NO,
|
||||
[7] = KC_NO,
|
||||
};
|
||||
|
||||
/*
|
||||
enum macro_id {
|
||||
MS_UL,
|
||||
MS_UR,
|
||||
MS_DL,
|
||||
MS_DR,
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
keyevent_t event = record->event;
|
||||
|
||||
switch (id) {
|
||||
case MS_UL:
|
||||
return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
|
||||
case MS_UR:
|
||||
return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
|
||||
case MS_DL:
|
||||
return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
|
||||
case MS_DR:
|
||||
return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
*/
|
||||
|
||||
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
|
||||
{
|
||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
|
||||
}
|
||||
|
||||
action_t keymap_fn_to_action(uint8_t keycode)
|
||||
{
|
||||
action_t action;
|
||||
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
|
||||
return action;
|
||||
}
|
||||
35
converter/terminal_bluefruit/led.c
Normal file
35
converter/terminal_bluefruit/led.c
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
/*
|
||||
Converter for 70% IBM Terminal Keyboard
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "stdint.h"
|
||||
#include "ps2.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
uint8_t ps2_led = 0;
|
||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
|
||||
ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK))
|
||||
ps2_led |= (1<<PS2_LED_NUM_LOCK);
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK))
|
||||
ps2_led |= (1<<PS2_LED_CAPS_LOCK);
|
||||
ps2_host_set_led(ps2_led);
|
||||
}
|
||||
262
converter/terminal_bluefruit/matrix.c
Normal file
262
converter/terminal_bluefruit/matrix.c
Normal file
|
|
@ -0,0 +1,262 @@
|
|||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "util.h"
|
||||
#include "debug.h"
|
||||
#include "ps2.h"
|
||||
#include "matrix.h"
|
||||
|
||||
|
||||
static void matrix_make(uint8_t code);
|
||||
static void matrix_break(uint8_t code);
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
static bool matrix_has_ghost_in_row(uint8_t row);
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* Matrix Array usage:
|
||||
* 'Scan Code Set 3' is assigned into 17x8 cell matrix.
|
||||
*
|
||||
* 8bit wide
|
||||
* +---------+
|
||||
* 0| |
|
||||
* :| | 0x00-0x87
|
||||
* ;| |
|
||||
* 17| |
|
||||
* +---------+
|
||||
*/
|
||||
static uint8_t matrix[MATRIX_ROWS];
|
||||
#define ROW(code) (code>>3)
|
||||
#define COL(code) (code&0x07)
|
||||
|
||||
static bool is_modified = false;
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
debug_enable = true;
|
||||
//debug_matrix = true;
|
||||
//debug_keyboard = true;
|
||||
//debug_mouse = false;
|
||||
|
||||
ps2_host_init();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
|
||||
// scan code reading states
|
||||
static enum {
|
||||
RESET,
|
||||
RESET_RESPONSE,
|
||||
KBD_ID0,
|
||||
KBD_ID1,
|
||||
CONFIG,
|
||||
READY,
|
||||
F0,
|
||||
} state = RESET;
|
||||
|
||||
is_modified = false;
|
||||
|
||||
uint8_t code;
|
||||
if ((code = ps2_host_recv())) {
|
||||
debug("r"); debug_hex(code); debug(" ");
|
||||
}
|
||||
|
||||
switch (state) {
|
||||
case RESET:
|
||||
debug("wFF ");
|
||||
if (ps2_host_send(0xFF) == 0xFA) {
|
||||
debug("[ack]\nRESET_RESPONSE: ");
|
||||
state = RESET_RESPONSE;
|
||||
}
|
||||
break;
|
||||
case RESET_RESPONSE:
|
||||
if (code == 0xAA) {
|
||||
debug("[ok]\nKBD_ID: ");
|
||||
state = KBD_ID0;
|
||||
} else if (code) {
|
||||
debug("err\nRESET: ");
|
||||
state = RESET;
|
||||
}
|
||||
break;
|
||||
// after reset receive keyboad ID(2 bytes)
|
||||
case KBD_ID0:
|
||||
if (code) {
|
||||
state = KBD_ID1;
|
||||
}
|
||||
break;
|
||||
case KBD_ID1:
|
||||
if (code) {
|
||||
debug("\nCONFIG: ");
|
||||
state = CONFIG;
|
||||
}
|
||||
break;
|
||||
case CONFIG:
|
||||
debug("wF8 ");
|
||||
if (ps2_host_send(0xF8) == 0xFA) {
|
||||
debug("[ack]\nREADY\n");
|
||||
state = READY;
|
||||
}
|
||||
break;
|
||||
case READY:
|
||||
switch (code) {
|
||||
case 0x00:
|
||||
break;
|
||||
case 0xF0:
|
||||
state = F0;
|
||||
debug(" ");
|
||||
break;
|
||||
default: // normal key make
|
||||
if (code < 0x88) {
|
||||
matrix_make(code);
|
||||
} else {
|
||||
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
|
||||
}
|
||||
state = READY;
|
||||
debug("\n");
|
||||
}
|
||||
break;
|
||||
case F0: // Break code
|
||||
switch (code) {
|
||||
case 0x00:
|
||||
break;
|
||||
default:
|
||||
if (code < 0x88) {
|
||||
matrix_break(code);
|
||||
} else {
|
||||
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
|
||||
}
|
||||
state = READY;
|
||||
debug("\n");
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
return is_modified;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_has_ghost(void)
|
||||
{
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
if (matrix_has_ghost_in_row(i))
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||
phex(row); print(": ");
|
||||
pbin_reverse(matrix_get_row(row));
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
if (matrix_has_ghost_in_row(row)) {
|
||||
print(" <ghost");
|
||||
}
|
||||
#endif
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
inline
|
||||
static bool matrix_has_ghost_in_row(uint8_t row)
|
||||
{
|
||||
// no ghost exists in case less than 2 keys on
|
||||
if (((matrix[row] - 1) & matrix[row]) == 0)
|
||||
return false;
|
||||
|
||||
// ghost exists in case same state as other row
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
inline
|
||||
static void matrix_make(uint8_t code)
|
||||
{
|
||||
if (!matrix_is_on(ROW(code), COL(code))) {
|
||||
matrix[ROW(code)] |= 1<<COL(code);
|
||||
is_modified = true;
|
||||
}
|
||||
}
|
||||
|
||||
inline
|
||||
static void matrix_break(uint8_t code)
|
||||
{
|
||||
if (matrix_is_on(ROW(code), COL(code))) {
|
||||
matrix[ROW(code)] &= ~(1<<COL(code));
|
||||
is_modified = true;
|
||||
}
|
||||
}
|
||||
27
protocol/bluefruit.mk
Normal file
27
protocol/bluefruit.mk
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
BLUEFRUIT_DIR = protocol/bluefruit
|
||||
PJRC_DIR = protocol/pjrc
|
||||
|
||||
SRC += $(BLUEFRUIT_DIR)/main.c \
|
||||
$(BLUEFRUIT_DIR)/bluefruit.c \
|
||||
serial_uart.c \
|
||||
$(PJRC_DIR)/pjrc.c \
|
||||
$(PJRC_DIR)/usb_keyboard.c \
|
||||
$(PJRC_DIR)/usb_debug.c \
|
||||
$(PJRC_DIR)/usb.c
|
||||
|
||||
# Option modules
|
||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
SRC += $(PJRC_DIR)/usb_mouse.c
|
||||
endif
|
||||
|
||||
ifdef EXTRAKEY_ENABLE
|
||||
SRC += $(PJRC_DIR)/usb_extra.c
|
||||
endif
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)
|
||||
#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only
|
||||
VPATH += $(TOP_DIR)/$(PJRC_DIR)
|
||||
|
||||
OPT_DEFS += -DPROTOCOL_BLUEFRUIT
|
||||
OPT_DEFS += -DPROTOCOL_PJRC
|
||||
202
protocol/bluefruit/bluefruit.c
Normal file
202
protocol/bluefruit/bluefruit.c
Normal file
|
|
@ -0,0 +1,202 @@
|
|||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include "host.h"
|
||||
#include "report.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "host_driver.h"
|
||||
#include "serial.h"
|
||||
#include "bluefruit.h"
|
||||
|
||||
#define BLUEFRUIT_TRACE_SERIAL 1
|
||||
|
||||
static uint8_t bluefruit_keyboard_leds = 0;
|
||||
|
||||
static void bluefruit_serial_send(uint8_t);
|
||||
|
||||
void bluefruit_keyboard_print_report(report_keyboard_t *report)
|
||||
{
|
||||
if (!debug_keyboard) return;
|
||||
dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); }
|
||||
dprintf(" mods: "); debug_hex8(report->mods);
|
||||
dprintf(" reserved: "); debug_hex8(report->reserved);
|
||||
dprintf("\n");
|
||||
}
|
||||
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
static void bluefruit_trace_header()
|
||||
{
|
||||
dprintf("+------------------------------------+\n");
|
||||
dprintf("| HID report to Bluefruit via serial |\n");
|
||||
dprintf("+------------------------------------+\n|");
|
||||
}
|
||||
|
||||
static void bluefruit_trace_footer()
|
||||
{
|
||||
dprintf("|\n+------------------------------------+\n\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
static void bluefruit_serial_send(uint8_t data)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
dprintf(" ");
|
||||
debug_hex8(data);
|
||||
dprintf(" ");
|
||||
#endif
|
||||
serial_send(data);
|
||||
}
|
||||
|
||||
/*------------------------------------------------------------------*
|
||||
* Host driver
|
||||
*------------------------------------------------------------------*/
|
||||
|
||||
static uint8_t keyboard_leds(void);
|
||||
static void send_keyboard(report_keyboard_t *report);
|
||||
static void send_mouse(report_mouse_t *report);
|
||||
static void send_system(uint16_t data);
|
||||
static void send_consumer(uint16_t data);
|
||||
|
||||
static host_driver_t driver = {
|
||||
keyboard_leds,
|
||||
send_keyboard,
|
||||
send_mouse,
|
||||
send_system,
|
||||
send_consumer
|
||||
};
|
||||
|
||||
host_driver_t *bluefruit_driver(void)
|
||||
{
|
||||
return &driver;
|
||||
}
|
||||
|
||||
static uint8_t keyboard_leds(void) {
|
||||
return bluefruit_keyboard_leds;
|
||||
}
|
||||
|
||||
static void send_keyboard(report_keyboard_t *report)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
for (uint8_t i = 0; i < REPORT_SIZE; i++) {
|
||||
bluefruit_serial_send(report->raw[i]);
|
||||
}
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void send_mouse(report_mouse_t *report)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x03);
|
||||
bluefruit_serial_send(report->buttons);
|
||||
bluefruit_serial_send(report->x);
|
||||
bluefruit_serial_send(report->y);
|
||||
bluefruit_serial_send(report->v); // should try sending the wheel v here
|
||||
bluefruit_serial_send(report->h); // should try sending the wheel h here
|
||||
bluefruit_serial_send(0x00);
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void send_system(uint16_t data)
|
||||
{
|
||||
}
|
||||
|
||||
/*
|
||||
+-----------------+-------------------+-------+
|
||||
| Consumer Key | Bit Map | Hex |
|
||||
+-----------------+-------------------+-------+
|
||||
| Home | 00000001 00000000 | 01 00 |
|
||||
| KeyboardLayout | 00000010 00000000 | 02 00 |
|
||||
| Search | 00000100 00000000 | 04 00 |
|
||||
| Snapshot | 00001000 00000000 | 08 00 |
|
||||
| VolumeUp | 00010000 00000000 | 10 00 |
|
||||
| VolumeDown | 00100000 00000000 | 20 00 |
|
||||
| Play/Pause | 01000000 00000000 | 40 00 |
|
||||
| Fast Forward | 10000000 00000000 | 80 00 |
|
||||
| Rewind | 00000000 00000001 | 00 01 |
|
||||
| Scan Next Track | 00000000 00000010 | 00 02 |
|
||||
| Scan Prev Track | 00000000 00000100 | 00 04 |
|
||||
| Random Play | 00000000 00001000 | 00 08 |
|
||||
| Stop | 00000000 00010000 | 00 10 |
|
||||
+-------------------------------------+-------+
|
||||
*/
|
||||
#define CONSUMER2BLUEFRUIT(usage) \
|
||||
(usage == AUDIO_MUTE ? 0x0000 : \
|
||||
(usage == AUDIO_VOL_UP ? 0x1000 : \
|
||||
(usage == AUDIO_VOL_DOWN ? 0x2000 : \
|
||||
(usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \
|
||||
(usage == TRANSPORT_PREV_TRACK ? 0x0004 : \
|
||||
(usage == TRANSPORT_STOP ? 0x0010 : \
|
||||
(usage == TRANSPORT_STOP_EJECT ? 0x0000 : \
|
||||
(usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \
|
||||
(usage == AL_CC_CONFIG ? 0x0000 : \
|
||||
(usage == AL_EMAIL ? 0x0000 : \
|
||||
(usage == AL_CALCULATOR ? 0x0000 : \
|
||||
(usage == AL_LOCAL_BROWSER ? 0x0000 : \
|
||||
(usage == AC_SEARCH ? 0x0400 : \
|
||||
(usage == AC_HOME ? 0x0100 : \
|
||||
(usage == AC_BACK ? 0x0000 : \
|
||||
(usage == AC_FORWARD ? 0x0000 : \
|
||||
(usage == AC_STOP ? 0x0000 : \
|
||||
(usage == AC_REFRESH ? 0x0000 : \
|
||||
(usage == AC_BOOKMARKS ? 0x0000 : 0)))))))))))))))))))
|
||||
|
||||
static void send_consumer(uint16_t data)
|
||||
{
|
||||
static uint16_t last_data = 0;
|
||||
if (data == last_data) return;
|
||||
last_data = data;
|
||||
|
||||
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
|
||||
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
dprintf("\nData: ");
|
||||
debug_hex16(data);
|
||||
dprintf("; bitmap: ");
|
||||
debug_hex16(bitmap);
|
||||
dprintf("\n");
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x02);
|
||||
bluefruit_serial_send((bitmap>>8)&0xFF);
|
||||
bluefruit_serial_send(bitmap&0xFF);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
||||
28
protocol/bluefruit/bluefruit.h
Normal file
28
protocol/bluefruit/bluefruit.h
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef VUSB_H
|
||||
#define VUSB_H
|
||||
|
||||
#include "host_driver.h"
|
||||
|
||||
|
||||
host_driver_t *bluefruit_driver(void);
|
||||
|
||||
#endif
|
||||
116
protocol/bluefruit/main.c
Normal file
116
protocol/bluefruit/main.c
Normal file
|
|
@ -0,0 +1,116 @@
|
|||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/sleep.h>
|
||||
#include <util/delay.h>
|
||||
#include "serial.h"
|
||||
#include "keyboard.h"
|
||||
#include "usb.h"
|
||||
#include "host.h"
|
||||
#include "timer.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "sendchar.h"
|
||||
#include "suspend.h"
|
||||
#include "bluefruit.h"
|
||||
#include "pjrc.h"
|
||||
|
||||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
|
||||
|
||||
#define HOST_DRIVER_NOT_SET 0
|
||||
#define BLUEFRUIT_HOST_DRIVER 1
|
||||
#define PJRC_HOST_DRIVER 2
|
||||
|
||||
int main(void)
|
||||
{
|
||||
|
||||
CPU_PRESCALE(0);
|
||||
|
||||
DDRD = _BV(PD5);
|
||||
DDRB = _BV(PB0);
|
||||
|
||||
PORTD = _BV(PD5);
|
||||
PORTB = _BV(PB0);
|
||||
|
||||
print_set_sendchar(sendchar);
|
||||
|
||||
usb_init();
|
||||
_delay_ms(2000);
|
||||
// while (!usb_configured()) /* wait */
|
||||
|
||||
dprintf("Initializing keyboard...\n");
|
||||
keyboard_init();
|
||||
|
||||
// This implementation is pretty simplistic... if the USB connection
|
||||
// is not configured, choose the Bluefruit, otherwise use USB
|
||||
// Definitely would prefer to have this driven by an input pin and make
|
||||
// it switch dynamically - BCG
|
||||
if (!usb_configured()) {
|
||||
|
||||
// Send power to Bluefruit... Adafruit says it takes 27 mA, I think
|
||||
// the pins should provide 40 mA, but just in case I switch the
|
||||
// Bluefruit using a transistor - BCG
|
||||
DDRB = _BV(PB6);
|
||||
PORTB |= _BV(PB6);
|
||||
|
||||
dprintf("Setting host driver to bluefruit...\n");
|
||||
host_set_driver(bluefruit_driver());
|
||||
|
||||
dprintf("Initializing serial...\n");
|
||||
serial_init();
|
||||
|
||||
// wait an extra second for the PC's operating system
|
||||
// to load drivers and do whatever it does to actually
|
||||
// be ready for input
|
||||
_delay_ms(1000);
|
||||
PORTD = ~_BV(PD5);
|
||||
dprintf("Starting main loop");
|
||||
while (1) {
|
||||
keyboard_task();
|
||||
}
|
||||
|
||||
} else {
|
||||
|
||||
// I'm not smart enough to get this done with LUFA - BCG
|
||||
dprintf("Setting host driver to PJRC...\n");
|
||||
host_set_driver(pjrc_driver());
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
sleep_led_init();
|
||||
#endif
|
||||
// wait an extra second for the PC's operating system
|
||||
// to load drivers and do whatever it does to actually
|
||||
// be ready for input
|
||||
_delay_ms(1000);
|
||||
PORTB = ~_BV(PB0);
|
||||
dprintf("Starting main loop");
|
||||
while (1) {
|
||||
while (suspend) {
|
||||
suspend_power_down();
|
||||
if (remote_wakeup && suspend_wakeup_condition()) {
|
||||
usb_remote_wakeup();
|
||||
}
|
||||
}
|
||||
keyboard_task();
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
Loading…
Reference in a new issue