1
0
Fork 0

Merge branch 'master' into promethium

This commit is contained in:
Priyadi Iman Nurcahyo 2017-01-17 01:39:29 +07:00
commit 11eb3d5491
72 changed files with 3022 additions and 324 deletions

View File

@ -0,0 +1,5 @@
TAP_DANCE_ENABLE = yes
NKRO_ENABLE = true
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no

View File

@ -0,0 +1,56 @@
<!-- -*- mode: markdown; fill-column: 8192 -*- -->
Mnemes Swedish Bonaza
=======================
My Layout in process, most of the code is shamelessly stolen from [algernons][algernon] excellent layout
[algernon]: https://github.com/algernon/ergodox-layout
It's for Windows (current work forces me to) and Swedish (matter of birth) so ymmw.
## Table of Contents
* [Layouts](#layouts)
- [Base layer](#base-layer)
- [Nav layer](#nav-layer)
- [Sym layer](#sym-layer)
- [LED states](#led-states)
# Layouts
## Base layer
![Base layer](img/base.png)
* The number row doubles as a function row. Short presses produces numbers, long presses produces Fxx
* The `Shift`, `Alt`, and `Control` modifiers are one-shot.
* `Backspace` and `Enter` doubles as switches to the `sym` layer when held
* The `ESC` key also doubles as a one-shot cancel key.
* The **Lead** key is followed by a sequence of keys.
- `LEAD l` : `lgui+l`.
- `LEAD s l` : `λ`.
- `LEAD s s` : `¯\_(ツ)_/¯`
- `LEAD s f` : `凸(ツ)凸`
- `LEAD a *` : Application switching based on position in start menu. Very specific to my computer.
## Nav layer
![Nav layer](img/fun.png)
Basic navigation on the right hand and modifiers close
by for the left. The latter because I tend to use `ctrl+arrows` quite a lot.
## Sym layer
![Sym layer](img/sym.png)
* Easy access to most symbols I use on a daily basis. Most common are on the home row, the rest are grouped as best as I could.
- `eq` : Tapdance, produces `===` and `!==`
- `fun`: Tapdance, produces `=>` and `() => {\n`
# License
GPL-3+

View File

@ -0,0 +1,7 @@
#define ONESHOT_TIMEOUT 3000
#define TAPPING_TERM 200
#define PREVENT_STUCK_MODIFIERS
#define LEADER_TIMEOUT 1000
#include "../../config.h"

Binary file not shown.

After

Width:  |  Height:  |  Size: 448 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 420 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 423 KiB

View File

@ -0,0 +1,337 @@
#include <stdarg.h>
#include "atreus62.h"
#include "led.h"
#include "action_layer.h"
#include "action_util.h"
/*
*WINDOWS SWEDISH
*/
#define KN_HALF KC_GRV // 1/2
#define KN_PLUS KC_MINS // +
#define KN_ACUT KC_EQL // ´
#define KN_AO KC_LBRC // Å
#define KN_UMLA KC_RBRC // ¨
#define KN_OE KC_SCLN // Ö
#define KN_AE KC_QUOT // Ä
#define KN_QUOT KC_NUHS // '
#define KN_LABK KC_NUBS // <
#define KN_MINS KC_SLSH // -
#define KN_EXLM LSFT(KC_1) // !
#define KN_DQT LSFT(KC_2) // "
#define KN_AT RALT(KC_2) // @
#define KN_HASH LSFT(KC_3) // #
#define KN_DLR RALT(KC_4) // $
#define KN_PERC LSFT(KC_5) // %
#define KN_AMPR LSFT(KC_6) // &
#define KN_SLSH LSFT(KC_7) // /
#define KN_LPRN LSFT(KC_8) // (
#define KN_RPRN LSFT(KC_9) // )
#define KN_EQL LSFT(KC_0) // =
#define KN_UNDS LSFT(KN_MINS) // _
#define KN_QUES LSFT(KN_PLUS) // ?
#define KN_GRAV LSFT(KN_ACUT) // `
#define KN_LCBR RALT(KC_7) // {
#define KN_RCBR RALT(KC_0) // }
#define KN_LBRC RALT(KC_8) // [
#define KN_RBRC RALT(KC_9) // ]
#define KN_RABK LSFT(KN_LABK) // <
#define KN_COLN LSFT(KC_DOT) // :
#define KN_SCLN LSFT(KC_COMM) // :
#define KN_PIPE RALT(KN_LABK) // |
#define KN_QUES LSFT(KN_PLUS) // ?
#define KN_CIRC LSFT(KN_UMLA) // ^
#define KN_ASTR LSFT(KN_QUOT) // *
#define KN_TILD RALT(KN_UMLA) // ~
#define KN_BSLS RALT(KN_PLUS) //
#define OSM_LCTL OSM(MOD_LCTL)
#define OSM_LALT OSM(MOD_LALT)
#define OSM_LSFT OSM(MOD_LSFT)
#define KC_HYP LSFT(LALT(LCTL(KC_LGUI)))
#define KC_COPY LCTL(KC_C)
#define KC_PASTE LCTL(KC_V)
#define KC_UNDO LCTL(KC_Z)
#define KC_REDO LCTL(LSFT(KC_Z))
// Layers
enum {
BASE = 0,
NAV,
SYM
};
//Macros
enum {
KF_1 = 0, // 1, F1
KF_2, // ...
KF_3,
KF_4,
KF_5,
KF_6,
KF_7,
KF_8,
KF_9,
KF_10,
KF_11,
KF_12
};
// Tapdance
enum {
TD_FUN = 0,
TD_EQ
};
//Custom keycodes
enum {
PLACEHOLDER = SAFE_RANGE
};
//State and timers
uint16_t kf_timers[12];
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = {
{ M(KF_11) ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,KC_NO ,M(KF_6) ,M(KF_7) ,M(KF_8) ,M(KF_9) ,M(KF_10) ,M(KF_12) },
{ KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_NO ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KN_AO },
{ OSM_LCTL ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_NO ,KC_H ,KC_J ,KC_K ,KC_L ,KN_OE ,KN_AE },
{ OSM_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_DELT ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KN_MINS ,OSM_LSFT },
{ MO(NAV) ,OSM_LCTL ,OSM_LALT ,KC_LGUI ,KC_SPC ,LT(SYM,KC_BSPC) ,KC_HYP ,LT(SYM,KC_ENT) ,KC_SPC ,KC_LEAD ,KC_LALT ,KC_LCTRL ,MO(NAV) }
},
[NAV] = {
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_NO ,KC_PGUP ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS },
{ KC_TRNS ,KC_LSFT ,KC_LCTL ,KC_LALT ,KC_L ,KC_TRNS ,KC_NO ,KC_PGDN ,KC_LEFT ,KC_DOWN ,KC_RIGHT ,KC_TRNS ,KC_TRNS },
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_VOLD ,KC_VOLU }
},
[SYM] = {
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,TD(TD_EQ) ,KC_NO ,TD(TD_FUN) ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
{ KC_TRNS ,KN_LABK ,KN_RABK ,KN_LCBR ,KN_RCBR ,KN_PLUS ,KC_NO ,KN_AT ,KN_DQT ,KN_QUOT ,KN_GRAV ,KN_SLSH ,KC_TRNS },
{ KC_TRNS ,KN_EXLM ,KN_EQL ,KN_LPRN ,KN_RPRN ,KN_MINS ,KC_NO ,KN_UNDS ,KN_SCLN ,KN_COLN ,KN_AMPR ,KN_PIPE ,KC_TRNS },
{ KC_TRNS ,KN_DLR ,KN_PERC ,KN_LBRC ,KN_RBRC ,KN_ASTR ,KC_TRNS ,KN_HASH ,KC_COMM ,KC_DOT ,KN_QUES ,KN_BSLS ,KC_TRNS },
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS }
}
};
#define TAP_ONCE(code) \
register_code (code); \
unregister_code (code)
static void m_tapn (uint8_t code, ...) {
uint8_t kc = code;
va_list ap;
va_start(ap, code);
do {
register_code(kc);
unregister_code(kc);
wait_ms(50);
kc = va_arg(ap, int);
} while (kc != 0);
va_end(ap);
}
static void m_handle_kf (keyrecord_t *record, uint8_t id) {
uint8_t code = id - KF_1;
if (record->event.pressed) {
kf_timers[code] = timer_read ();
} else {
uint8_t kc_base;
uint8_t long_press = (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM);
kf_timers[code] = 0;
switch(id){
case KF_1 ... KF_10:
if (long_press) {
// Long press
kc_base = KC_F1;
} else {
kc_base = KC_1;
}
code += kc_base;
break;
case KF_11:
code = long_press ? KC_F11 : KC_ESC;
break;
case KF_12:
code = long_press ? KC_F12 : KN_PLUS;
break;
}
register_code (code);
unregister_code (code);
}
}
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch (id) {
case KF_1 ... KF_12:
m_handle_kf(record, id);
break;
}
return MACRO_NONE;
};
// Custom keycodes
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool queue = true;
//Cancle one-shot mods.
switch (keycode) {
case KC_ESC:
if (record->event.pressed && get_oneshot_mods() && !has_oneshot_mods_timed_out()) {
clear_oneshot_mods();
queue = false;
}
break;
}
return queue;
}
// TAP DANCE SETTINGS
void dance_eq (qk_tap_dance_state_t *state, void *user_data) {
switch (state->count) {
case 1: // ===
register_code(KC_LSHIFT);
m_tapn(KC_0, KC_0, KC_0, 0);
unregister_code(KC_LSHIFT);
break;
case 2:
register_code(KC_LSHIFT);
m_tapn(KC_1, KC_0, KC_0, 0);
unregister_code(KC_LSHIFT);
break;
default:
reset_tap_dance(state);
}
}
void dance_fun (qk_tap_dance_state_t *state, void *user_data) {
switch (state->count) {
case 1: // =>
register_code(KC_LSHIFT);
m_tapn(KC_0, KN_LABK, 0);
unregister_code(KC_LSHIFT);
break;
case 2: // () => {}
register_code(KC_LSHIFT);
m_tapn(KC_8, KC_9, KC_SPC, KC_0, KN_LABK, KC_SPC, 0);
unregister_code(KC_LSHIFT);
register_code(KC_RALT);
m_tapn(KC_7, 0);
unregister_code(KC_RALT);
TAP_ONCE(KC_ENT);
break;
default:
reset_tap_dance(state);
}
}
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_FUN] = ACTION_TAP_DANCE_FN (dance_fun)
,[TD_EQ] = ACTION_TAP_DANCE_FN (dance_eq)
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
set_unicode_input_mode(UC_WINC);
};
LEADER_EXTERNS();
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
LEADER_DICTIONARY() {
leading = false;
leader_end();
SEQ_ONE_KEY(KC_L){
register_code(KC_RGUI);
TAP_ONCE(KC_L);
unregister_code(KC_RGUI);
};
SEQ_TWO_KEYS (KC_A, KC_W) {
//Web - chrome
register_code (KC_LGUI); TAP_ONCE (KC_1); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_P) {
//sPotify
register_code (KC_LGUI); TAP_ONCE (KC_2); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_T) {
//Total Commander
register_code (KC_LGUI); TAP_ONCE (KC_3); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_A) {
//Atom
register_code (KC_LGUI); TAP_ONCE (KC_4); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_E) {
//Emacs
register_code (KC_LGUI); TAP_ONCE (KC_5); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_C) {
//Cmdr
register_code (KC_LGUI); TAP_ONCE (KC_6); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_A, KC_S) {
//Slack
register_code (KC_LGUI); TAP_ONCE (KC_7); unregister_code (KC_LGUI);
}
SEQ_TWO_KEYS (KC_S, KC_S) {
// ¯\_(ツ)_/¯
unicode_input_start(); register_hex(0xaf); unicode_input_finish();
register_code (KC_LALT);
register_code (KC_LCTL);
TAP_ONCE (KN_PLUS);
unregister_code (KC_LCTL);
unregister_code (KC_LALT);
register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT);
unicode_input_start (); register_hex(0x30c4); unicode_input_finish();
register_code (KC_RSFT); TAP_ONCE (KC_9); TAP_ONCE(KC_7); unregister_code (KC_RSFT);
unicode_input_start (); register_hex(0xaf); unicode_input_finish();
}
SEQ_TWO_KEYS (KC_S, KC_F) {
// 凸(ツ)凸
unicode_input_start(); register_hex(0x51F8); unicode_input_finish();
register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT);
unicode_input_start (); register_hex(0x30c4); unicode_input_finish();
register_code (KC_RSFT); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
unicode_input_start (); register_hex(0x51F8); unicode_input_finish();
}
SEQ_TWO_KEYS (KC_S, KC_L) {
// λ
unicode_input_start();
register_hex(0x03bb);
unicode_input_finish();
}
};
};

View File

@ -0,0 +1,114 @@
Todo
☐ 2610 Todo
☑ 2611 Done
☒ 2612 Failed
Operator
× 00D7 Multiplication
÷ 00F7 Division
≤ 2264 LessEqual
≥ 2265 MoreEqual
± 00B1 Plusminus
Math
∏ 220F Product
∑ 2211 Sum
≈ 2248 Almost
≡ 2261 Equivalent
∞ 221E Infinity
‰ 2030 Mille
Set
⊂ 2282 Subset
⊃ 2283 sUperset
∩ 2229 Intersextion
222A Union
∈ 2208 Element
∉ 2209 Notelement
∍ 220D Contains
∌ 220C doesNotcontain
Logic
¬ 00AC Not
∧ 2227 And
2228 Or
∃ 2203 Exists
∄ 2204 Notexists
Greek
µ 00B5 Micro
λ 03BB Lamda
Ω 2126 Omega
α 03B1 Alpha
β 03B2 Beta
γ 03B3 Gamma
π 03C0 Pi
δ 03B4 Delta
Other
☁ 2601 Cloud
☼ 263C Sun
☂ 2602 Rain
☠ 2620 Skull
♺ 267A Recycle
👍1F44D thumbsUp
👎1F44E thumbsDown
💩 1F4A9 Poo
//Todo
SEQ_THREE_KEYS(KC_U, KC_G, KC_T){m_unicode(0x2610);}; // Todo
SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x2611);}; // Done
SEQ_THREE_KEYS(KC_U, KC_G, KC_F){m_unicode(0x2612);}; // Failed
//Operator
SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x00D7);}; // Multiplication
SEQ_THREE_KEYS(KC_U, KC_O, KC_D){m_unicode(0x00F7);}; // Division
SEQ_THREE_KEYS(KC_U, KC_O, KC_L){m_unicode(0x2264);}; // LessEqual
SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x2265);}; // MoreEqual
SEQ_THREE_KEYS(KC_U, KC_O, KC_P){m_unicode(0x00B1);}; // Plusminus
//Math
SEQ_THREE_KEYS(KC_U, KC_M, KC_P){m_unicode(0x220F);}; // Product
SEQ_THREE_KEYS(KC_U, KC_M, KC_S){m_unicode(0x2211);}; // Sum
SEQ_THREE_KEYS(KC_U, KC_M, KC_A){m_unicode(0x2248);}; // Almost
SEQ_THREE_KEYS(KC_U, KC_M, KC_E){m_unicode(0x2261);}; // Equivalent
SEQ_THREE_KEYS(KC_U, KC_M, KC_I){m_unicode(0x221E);}; // Infinity
SEQ_THREE_KEYS(KC_U, KC_M, KC_M){m_unicode(0x2030);}; // Mille
//Set
SEQ_THREE_KEYS(KC_U, KC_S, KC_S){m_unicode(0x2282);}; Subset
SEQ_THREE_KEYS(KC_U, KC_S, KC_P){m_unicode(0x2283);}; suPerset
SEQ_THREE_KEYS(KC_U, KC_S, KC_I){m_unicode(0x2229);}; Intersection
SEQ_THREE_KEYS(KC_U, KC_S, KC_U){m_unicode(0x222A);}; Union
SEQ_THREE_KEYS(KC_U, KC_S, KC_E){m_unicode(0x2208);}; Element
SEQ_THREE_KEYS(KC_U, KC_S, KC_N){m_unicode(0x2209);}; Notelement
SEQ_THREE_KEYS(KC_U, KC_S, KC_C){m_unicode(0x220D);}; Contains
SEQ_THREE_KEYS(KC_U, KC_S, KC_D){m_unicode(0x220C);}; doesNotcontain
//Logic
SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x00AC);}; // Not
SEQ_THREE_KEYS(KC_U, KC_L, KC_A){m_unicode(0x2227);}; // And
SEQ_THREE_KEYS(KC_U, KC_L, KC_O){m_unicode(0x2228);}; // Or
SEQ_THREE_KEYS(KC_U, KC_L, KC_E){m_unicode(0x2203);}; // Exists
SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x2204);}; // Notexists
//Greek
SEQ_THREE_KEYS(KC_U, KC_G, KC_M){m_unicode(0x00B5);}; // Micro
SEQ_THREE_KEYS(KC_U, KC_G, KC_L){m_unicode(0x03BB);}; // Lamda
SEQ_THREE_KEYS(KC_U, KC_G, KC_O){m_unicode(0x2126);}; // Omega
SEQ_THREE_KEYS(KC_U, KC_G, KC_A){m_unicode(0x03B1);}; // Alpha
SEQ_THREE_KEYS(KC_U, KC_G, KC_B){m_unicode(0x03B2);}; // Beta
SEQ_THREE_KEYS(KC_U, KC_G, KC_G){m_unicode(0x03B3);}; // Gamma
SEQ_THREE_KEYS(KC_U, KC_G, KC_P){m_unicode(0x03C0);}; // Pi
SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x03B4);}; // Delta
//Zother
SEQ_THREE_KEYS(KC_U, KC_Z, KC_C){m_unicode(0x2601);}; // Cloud
SEQ_THREE_KEYS(KC_U, KC_Z, KC_S){m_unicode(0x263C);}; // Sun
SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x2602);}; // Rain
SEQ_THREE_KEYS(KC_U, KC_Z, KC_K){m_unicode(0x2620);}; // sKull
SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x267A);}; // rEcycle
SEQ_THREE_KEYS(KC_U, KC_Z, KC_U){m_unicode(0x1F44D);}; // thumbsUp
SEQ_THREE_KEYS(KC_U, KC_Z, KC_D){m_unicode(0x1F44E);}; // thumbsDown
SEQ_THREE_KEYS(KC_U, KC_Z, KC_P){m_unicode(0x1F4A9);}; // Poo

View File

@ -0,0 +1,226 @@
#include "ergodox.h"
#include "debug.h"
#include "action_layer.h"
#include "version.h"
#define BASE 0 // default layer
#define SYMB 1 // symbols
#define MDIA 2 // media keys
enum custom_keycodes {
PLACEHOLDER = SAFE_RANGE, // can always be here
EPRM,
VRSN,
RGB_SLD
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
*
* ,--------------------------------------------------------. ,--------------------------------------------------------.
* | = | 1 | 2 | 3 | 4 | 5 | Cmd,Shft,[ | | Cmd,Shft,] | 6 | 7 | 8 | 9 | 0 | - |
* |--------+------+------+------+------+-------------------| |------------+------+------+------+------+------+--------|
* | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* |BkSp/Cmd| A | S | D | F | G |------------| |------------| H | J | K | L |; / L2|' / Cmd |
* |--------+------+------+------+------+------| Hyper | | Meh |------+------+------+------+------+--------|
* | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift |
* `--------+------+------+------+------+-------------------' `-------------+------+------+------+------+--------'
* |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* |Ctrl/Esc|PgUp| | App | LGui |
* ,------|------|------| |------+--------+------.
* | | | PgDn | | Home | | |
* | Space|Backsp|------| |------| Tab |Enter |
* | |ace | Esc | | Alt | | |
* `--------------------' `----------------------'
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[BASE] = KEYMAP( // layer 0 : default
// left hand
KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, M(2),
KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB),
GUI_T(KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G,
KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO),
LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT,
CTL_T(KC_ESC),KC_PGUP,
KC_PGDN,
KC_SPC,KC_BSPC, KC_ESC,
// right hand
M(3), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT,
KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
ALT_T(KC_APP), KC_LGUI,
KC_HOME,
KC_LALT,KC_TAB, KC_ENT
),
/* Keymap 1: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | % | ^ | [ | ] | ~ | | | | <- | 1 | 2 | 3 | \ | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | . | 0 | = | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// SYMBOLS
[SYMB] = KEYMAP(
// left hand
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12,
KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS,
KC_TRNS, M(1), KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS,
KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
// KC_COMM, KC_MINS
/* Keymap 2: Media and mouse keys
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | MsUp | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | | | | | | Prev | Next | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | |Brwser|
* | | |------| |------| |Back |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// MEDIA AND MOUSE
[MDIA] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_WBAK
),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
}
break;
case 1:
if (record->event.pressed) { // For resetting EEPROM
eeconfig_init();
}
break;
}
return MACRO_NONE;
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
// dynamically generate these.
case EPRM:
if (record->event.pressed) {
eeconfig_init();
}
return false;
break;
case VRSN:
if (record->event.pressed) {
SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
}
return false;
break;
case RGB_SLD:
if (record->event.pressed) {
#ifdef RGBLIGHT_ENABLE
rgblight_mode(1);
#endif
}
return false;
break;
}
return true;
}
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// none
break;
}
};

Binary file not shown.

After

Width:  |  Height:  |  Size: 78 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 54 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 50 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 42 KiB

View File

@ -5,6 +5,32 @@ some common keys might be missing, as this layout is intented to be used on *nix
with their system. The layout is geared towards avoiding using the rat (mouse for those of you who are
unfamiliar with tiling window managers) as much as possibly.
# Layouts
All layer images created using [keyboard-layout-editor](http://www.keyboard-layout-editor.com/)
## Base layer
[![Base layer](images/deadcyclo-base-layout.png)](http://www.keyboard-layout-editor.com/#/gists/0321b18620180a3e46c498206eb65366)
## Layer 1 - Symbols
[![Layer 1 - Symbols](images/deadcyclo-layer-1-symbols.png)](http://www.keyboard-layout-editor.com/#/gists/96714e198054c9115bafb5267cc6bc73)
## Layer 2 - Media and Mouse
[![Layer 2 - Media and Mouse](images/deadcyclo-layer-2-media-and-mouse.png)](http://www.keyboard-layout-editor.com/#/gists/824759486e378bcec30784309a7e5731)
## Layer 3 - Navigation
[![Layer 3 - Navigation](images/deadcyclo-layer-3-navigation.png)](http://www.keyboard-layout-editor.com/#/gists/67d9613dcd873c68693d11863d0fd289)
# Changelog
- 02.01.2017 Added delete key on second layer
- 10.01.2017 Added layer images to readme
# TODO
- Add unicode support (direct input and indirect? see algernon layout for examples)
- Add descriptions below each layer image of any special functions/keys

View File

@ -1,3 +1,5 @@
SUBPROJECT_DEFAULT = alvicstep
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif
endif

View File

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../../Makefile
endif

View File

@ -0,0 +1,105 @@
#include "kinesis.h"
// begin section origin https://github.com/alvicstep/tmk_keyboard
void all_led_off(void)
{
PORTD = 0b11111111;
}
void all_led_on(void)
{
PORTD = 0b00000000;
}
void num_lock_led_on(void)
{
PORTD = 0b11101111;
}
void caps_lock_led_on(void)
{
PORTD = 0b01111111;
}
void scroll_lock_led_on(void)
{
PORTD = 0b11011111;
}
void keypad_led_on(void)
{
PORTD = 0b10111111;
}
void blink_all_leds(void)
{
all_led_on();
_delay_ms(500);
all_led_off();
_delay_ms(100);
caps_lock_led_on();
_delay_ms(100);
num_lock_led_on();
_delay_ms(100);
scroll_lock_led_on();
_delay_ms(100);
keypad_led_on();
_delay_ms(100);
//back
scroll_lock_led_on();
_delay_ms(100);
num_lock_led_on();
_delay_ms(100);
caps_lock_led_on();
_delay_ms(100);
all_led_off();
}
// End section origin https://github.com/alvicstep/tmk_keyboard
void matrix_init_kb(void) {
blink_all_leds();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
uint8_t leds = 0xF0;
if (usb_led & 1 << USB_LED_NUM_LOCK)
leds &= ~0x10;
if (usb_led & 1 << USB_LED_CAPS_LOCK)
leds &= ~0x80;
if (usb_led & 1 << USB_LED_SCROLL_LOCK)
leds &= ~0x20;
PORTD = (PORTD & 0x0F) | leds;
led_set_user(usb_led);
}

View File

@ -0,0 +1,67 @@
#ifndef KINESIS_ALVICSTEP_H
#define KINESIS_ALVICSTEP_H
#include "../kinesis.h"
#define KEYMAP( \
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
k80,k70,k60,k50,k40,k30, \
k81,k71,k61,k51,k41,k31, \
k82,k72,k62,k52,k42,k32, \
k83,k73,k63,k53,k43,k33, \
k74,k64,k54,k34, \
k36,k35, \
k55, \
k56,k46,k75, \
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
k94,kA4,kB4,kD4,kE4,kF4, \
k95,kA5,kB5,kD5,kE5,kF5, \
k96,kA6,kB6,kD6,kE6,kF6, \
k97,kA7,kB7,kD7,kE7,kF7, \
k93,kB3,kD3,kE3, \
k47,k66, \
k67, \
k87,k76,k86 \
) { \
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
{ k80, k81, k82, k83, k84, k85, k86, k87}, \
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
}
/* Row pin configuration
PF0 A
PF1 B
PF2 C
PF3 G 0 = U4, 1 = U5
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 rA rB rC rD rE rF
PB0 c0| f6 f8 f7 5 4 3 2 1 =+
PB1 c1| f3 f5 f4 t r e w q TAB
PB2 c2| ESC f2 f1 g f d s a CL
PB3 c3| f9 f11 f10 b v c x z LS UP DN [{ ]}
PB4 c4| f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
PB5 c5| PB PGM KPD y u i o p \
PB6 c6| LC DL BS RC EN SP h j k l ;: '"
PB7 c7| RA PU PD n m ,< .> /? RS
*/
#endif

View File

@ -0,0 +1,35 @@
#ifndef ALVICSTEP_CONFIG_H
#define ALVICSTEP_CONFIG_H
#include "../config.h"
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
/* key matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
//Passed through the port multipler, so 4 pins =16
#define MATRIX_ROW_PINS { F0,F1, F2, F3 }
// May be upside down.
#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#endif

View File

Before

Width:  |  Height:  |  Size: 174 KiB

After

Width:  |  Height:  |  Size: 174 KiB

View File

Before

Width:  |  Height:  |  Size: 336 KiB

After

Width:  |  Height:  |  Size: 336 KiB

View File

Before

Width:  |  Height:  |  Size: 260 KiB

After

Width:  |  Height:  |  Size: 260 KiB

View File

Before

Width:  |  Height:  |  Size: 171 KiB

After

Width:  |  Height:  |  Size: 171 KiB

View File

@ -0,0 +1,46 @@
kinesis-advantage keyboard firmware
======================
This directory is called alvicstep because https://github.com/alvicstep did the heavy work and took the photos in the doc directory.
alvicstep did NOT do anything related to the QMK implementation, so don't bug him/her.
There are other ways of replacing the CPU in the kinesis, this one uses jumper wires from the Teensy to the original DIP socket
## Kinesis specific information
This is a port of https://github.com/alvicstep/tmk_keyboard,
which is a fork of https://github.com/wjanssens/tmk_keyboard,
which is based on work from https://github.com/chrisandreae/keyboard-firmware
If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK.
I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead.
Not yet implemented:
- Kinesis EEProm reading or writing
- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
$ make keymap=[default|jack|<name>]
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

View File

@ -0,0 +1,10 @@
ifndef QUANTUM_DIR
include ../../../Makefile
endif
# just silently stop, since we need to upload with teensy uploader
upload: build

View File

@ -22,58 +22,22 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT kinesis-advantage
#define DESCRIPTION A custom keyboard
// Mouse
#define MOUSEKEY_DELAY 20
#define MOUSEKEY_DELAY 60
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_MAX_SPEED 4
#define MOUSEKEY_TIME_TO_MAX 20
#define MOUSEKEY_TIME_TO_MAX 10
#define MOUSEKEY_WHEEL_MAX_SPEED 1
#define MOUSEKEY_WHEEL_DELTA 1
#define MOUSEKEY_WHEEL_TIME_TO_MAX 1
/* key matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
//Passed through the port multipler, so 4 pins =16
#define MATRIX_ROW_PINS { F0,F1, F2, F3 }
// May be upside down.
#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
@ -171,4 +135,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#ifdef SUBPROJECT_alvicstep
#include "alvicstep/config.h"
#endif
#ifdef SUBPROJECT_stapelberg
#include "stapelberg/config.h"
#endif
#endif

View File

@ -1,10 +1,6 @@
#include "kinesis.h"
#include "action_layer.h"
#define QWERTY 0 // Base qerty
#define SYMB 1// Symbol layer
// An almost entirely blank keymap. Test layers with the upper right hand key - 1 in normal mode, reset in layer 2.
#define QWERTY 0 // Base qwerty
/****************************************************************************************************
@ -33,7 +29,6 @@
* `--------------------' `--------------------'
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[QWERTY] = KEYMAP(
KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8,
@ -45,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LCTL,KC_LALT,
KC_HOME,
KC_BSPC,KC_DEL ,KC_END ,
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1,
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1,
KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS,
KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS,
KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT,
@ -54,32 +49,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_RGUI,KC_RCTL,
KC_PGUP,
KC_PGDN,KC_ENTER ,KC_SPC
),
[SYMB] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, RESET,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
)
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols)
const uint16_t PROGMEM fn_actions[] = {
};

View File

@ -0,0 +1,93 @@
#include "kinesis.h"
#define _DVORAK 0 // Base Dvorak layer
#define _MEDIA 1 // Media layer
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DVORAK] = KEYMAP(
// left hand
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5,
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y,
KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I,
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X,
KC_ESC, KC_LBRC, KC_DOWN, KC_UP,
// left thumb
KC_LGUI, KC_LCTL,
KC_LALT,
KC_BSPC, KC_DEL, TG(_MEDIA),
// right hand
KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, KC_1,
KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,
KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,
KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
KC_LEFT, KC_RIGHT, KC_RBRC, KC_BSLS,
// right thumb
KC_RCTL, KC_RGUI,
KC_RALT,
TG(_MEDIA), KC_ENT, KC_SPC
),
[_MEDIA] = KEYMAP(
// left hand
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO,
KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,
KC_NO, KC_NO, KC_MS_D, KC_MS_U,
// left thumb
KC_NO, KC_NO,
KC_NO,
KC_NO, KC_NO, KC_TRNS,
// right hand
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_POWER,
KC_NO, KC_VOLU, KC_MS_U, KC_VOLD, KC_NO, KC_NO,
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO,
KC_MS_L, KC_MS_R, KC_NO, KC_NO,
// right thumb
KC_NO, KC_NO,
KC_NO,
KC_TRNS, KC_ENT, KC_NO
)
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View File

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View File

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View File

@ -2,10 +2,10 @@
#include "action_layer.h"
#include "mousekey.h"
#define QWERTY 0 // Base qerty
#define SYMB 1// Symbol layer
#define MOUSE 2//
#define _QWERTY 0 // Base qerty
#define _SYMB 1// Symbol layer
#define _MOUSE 2//
#define _TRANS 3//
@ -20,27 +20,26 @@ enum {
};
// Borrowing very heavily from
// https://github.com/alvicstep/tmk_keyboard
// Why so many gui keys, why not just map all the OS X stuff to buttons? Good question.
/****************************************************************************************************
*
* Keymap: Default Layer in Qwerty
*
* ,-------------------------------------------------------------------------------------------------------------------.
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT |
* | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT |
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
* | =+ | 1! | 2@ | 3# | 4$ | 5% | | 6^ | 7& | 8* | 9( | 0) | -_ |
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \| |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* |MouseFN1| A | S | D | F | G | | H | J | K | L | ;: | '" |
* |MouseFN0| A | S | D | F | G | | H | J | K | L | ;: | '" |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | Shift | Z | X | C | V | B | | N | M | ,. | .> | /? | Shift |
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
* | `~ | ESC |MOUSE1|MOUSE2| | [{ | ]} | ESC | GUI |
* | ~` | ESC |GUI/L |L1/RT | | L1/UP|GUI/DN| [{ | ]} |
* `---------------------------' `---------------------------'
* ,-------------. ,-------------.
* | Ctrl | Alt | | Gui | Ctrl |
* | CTRL | GUI | | ALT | GUI |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------|Return| Space|
@ -48,16 +47,15 @@ enum {
* `--------------------' `--------------------'
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[QWERTY] = KEYMAP(
[_QWERTY] = KEYMAP(
KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8,
KC_EQL, KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,
KC_TAB, KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,
KC_FN1 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,
KC_FN0 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,
KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,
KC_GRV ,KC_ESC, KC_BTN1,KC_BTN2,
KC_LCTL,KC_LALT,
KC_GRAVE, KC_ESC, KC_FN4, KC_FN5,
KC_LCTL,KC_LGUI,
KC_HOME,
KC_BSPC,KC_DEL ,KC_FN0 ,
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_FN0 ,KC_FN1 ,KC_FN2, KC_NO, RESET,
@ -65,18 +63,45 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS,
KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT,
KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT,
KC_LBRC,KC_RBRC, KC_ESC, KC_RGUI,
KC_RGUI,KC_RCTL,
KC_FN6, KC_FN7, KC_LBRC ,KC_RBRC,
KC_RALT,KC_RGUI,
KC_PGUP,
KC_PGDN,KC_ENTER ,KC_SPC
),
[SYMB] = KEYMAP(
/* _SYMBol level
*
* ,-------------------------------------------------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | | bOOT |
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
* | | | * | # | | | | | | | | | |
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
* | | / | [ | ] | | | | | | | | | |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | | | { | } | | | | | | | | | |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | | = | ( | ) | | | | | | | | | |
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
* | | |GUI/L |L1/RT | | L1/UP|GUI/DN| { | } |
* `---------------------------' `---------------------------'
* ,-------------. ,-------------.
* | CTRL | GUI | | ALT | GUI |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------|Mouse1|Mouse2|
* | | | End | | PgDn |LClick|Rclick|
* `--------------------' `--------------------'
*/
[_SYMB] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_ASTR, KC_HASH, KC_TRNS, KC_TRNS,
KC_TRNS, KC_SLSH, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, RSFT(KC_LBRC), RSFT(KC_RBRC), KC_TRNS, KC_TRNS,
KC_TRNS, KC_EQL, RSFT(KC_9), RSFT(KC_0), KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_FN4, KC_FN5,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
@ -85,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_FN6, KC_FN7, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
@ -103,7 +128,55 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | | GuiZ | GUI X| GUI C| GUI_V|PgDown| | MWD | MDown|MS Dwn|MS_DR | ? | |
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
* | `~ | ESC | < | > | | { | } | ESC | |
* | `~ | ESC | | | | | | { | } |
* `---------------------------' `---------------------------'
* ,-------------. ,-------------.
* | CTRL | GUI | | ALT | GUI |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------|Mouse1|Mouse2|
* | | | End | | PgDn |LClick|Rclick|
* `--------------------' `--------------------'
*/
[_MOUSE] = KEYMAP(
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_EXLM ,KC_AT, KC_HASH, KC_DLR ,KC_PERC ,
KC_TRNS, KC_NO, KC_NO, KC_UP, KC_NO, KC_PGUP,
KC_FN1, LCTL(KC_A),KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E),
KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN,
KC_TRNS, KC_TRNS, KC_NO, KC_NO,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0,RESET,
KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ACL2,
KC_WH_U, M(A_MUL), KC_MS_U, M(A_MUR), KC_NO, KC_ACL1,
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_ACL0,
KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), RSFT(KC_LBRC), RSFT(KC_RBRC),
KC_LCBR, KC_RCBR, KC_NO, KC_NO,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_BTN1, KC_BTN2
),
/* EMPTY
*
* ,-------------------------------------------------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | | bOOT |
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
* | | | | | | | | | | | | | |
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
* | | | | | | | | | | | | | |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | | | | | | | | | | | | | |
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
* | | | | | | | | | | | | | |
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
* | | | | | | | | | |
* `---------------------------' `---------------------------'
* ,-------------. ,-------------.
* | Ctrl | Alt | | Gui | Ctrl |
@ -115,36 +188,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[MOUSE] = KEYMAP(
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_EXLM ,KC_AT, KC_HASH, KC_DLR ,KC_PERC ,
KC_TRNS, KC_NO, KC_NO, KC_UP, KC_NO, KC_PGUP,
KC_FN1, LCTL(KC_A),KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E),
KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN,
KC_TRNS, KC_TRNS, KC_LABK, KC_RABK,
[_TRANS] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_FN10, KC_FN11, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0,RESET,
KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ACL2,
KC_WH_U, M(A_MUL), KC_MS_U, M(A_MUR), KC_NO, KC_ACL1,
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_ACL0,
KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), KC_TRNS, KC_TRNS,
KC_LCBR, KC_RCBR, KC_ESC, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, KC_2,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_BTN1, KC_BTN2
KC_TRNS, KC_TRNS, KC_TRNS
),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols)
[1] = ACTION_LAYER_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols)
[2] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols)
[0] = ACTION_LAYER_TAP_TOGGLE(_MOUSE) ,
[1] = ACTION_LAYER_TOGGLE(_MOUSE) ,
[2] = ACTION_LAYER_TAP_TOGGLE(_SYMB) ,
[5]= ACTION_LAYER_TAP_KEY(_SYMB,KC_RIGHT),
[4]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_LEFT),
[6]= ACTION_LAYER_TAP_KEY(_SYMB,KC_UP),
[7]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_DOWN),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
@ -214,18 +294,23 @@ void matrix_init_user(void) {
}
void matrix_scan_user(void) {
#ifdef ALVICSTEP_CONFIG_H
int8_t layer = biton32(layer_state);
switch (layer) {
case 1:
all_led_off();
break;
case 2:
if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) {
all_led_off();
caps_lock_led_on();
}
break;
case 2:
if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) {
all_led_off();
scroll_lock_led_on();
}
case 0:
all_led_off();
num_lock_led_on();
@ -233,6 +318,7 @@ void matrix_scan_user(void) {
default:
break;
}
#endif
}

View File

@ -1,106 +1 @@
#include "kinesis.h"
// begin section origin https://github.com/alvicstep/tmk_keyboard
void all_led_off(void)
{
PORTD = 0b11111111;
}
void all_led_on(void)
{
PORTD = 0b00000000;
}
void num_lock_led_on(void)
{
PORTD = 0b11101111;
}
void caps_lock_led_on(void)
{
PORTD = 0b01111111;
}
void scroll_lock_led_on(void)
{
PORTD = 0b11011111;
}
void keypad_led_on(void)
{
PORTD = 0b10111111;
}
void blink_all_leds(void)
{
all_led_on();
_delay_ms(500);
all_led_off();
_delay_ms(100);
caps_lock_led_on();
_delay_ms(100);
num_lock_led_on();
_delay_ms(100);
scroll_lock_led_on();
_delay_ms(100);
keypad_led_on();
_delay_ms(100);
//back
scroll_lock_led_on();
_delay_ms(100);
num_lock_led_on();
_delay_ms(100);
caps_lock_led_on();
_delay_ms(100);
all_led_off();
}
// End section origin https://github.com/alvicstep/tmk_keyboard
void matrix_init_kb(void) {
blink_all_leds();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
uint8_t leds = 0xF0;
if (usb_led & 1 << USB_LED_NUM_LOCK)
leds &= ~0x10;
if (usb_led & 1 << USB_LED_CAPS_LOCK)
leds &= ~0x80;
if (usb_led & 1 << USB_LED_SCROLL_LOCK)
leds &= ~0x20;
PORTD = (PORTD & 0x0F) | leds;
led_set_user(usb_led);
}

View File

@ -1,67 +1,23 @@
#ifndef KINESIS_H
#define KINESIS_H
#ifdef SUBPROJECT_alvicstep
#include "alvicstep.h"
#endif
#ifdef SUBPROJECT_stapelberg
#include "stapelberg.h"
#endif
#include "quantum.h"
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
void all_led_off(void);
void all_led_on(void);
void num_lock_led_on(void);
void caps_lock_led_on(void);
void scroll_lock_led_on(void);
void keypad_led_on(void);
#define KEYMAP( \
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
k80,k70,k60,k50,k40,k30, \
k81,k71,k61,k51,k41,k31, \
k82,k72,k62,k52,k42,k32, \
k83,k73,k63,k53,k43,k33, \
k74,k64,k54,k34, \
k36,k35, \
k55, \
k56,k46,k75, \
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
k94,kA4,kB4,kD4,kE4,kF4, \
k95,kA5,kB5,kD5,kE5,kF5, \
k96,kA6,kB6,kD6,kE6,kF6, \
k97,kA7,kB7,kD7,kE7,kF7, \
k93,kB3,kD3,kE3, \
k47,k66, \
k67, \
k87,k76,k86 \
) { \
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
{ k80, k81, k82, k83, KC_NO ,KC_NO, k86, k87}, \
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, k84, k85}, \
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
}
/* 4y0 A 4y1 B 4y2 4y3 D 4y4 E 4y5 F 4y6 G 4y7 H 5y0 I 5y1 J 5y2 K 5y3 L 5y4 M 5y5 N 5y6 O 5y7 P */
/*
0 1 2 3 4 5 6 7 8 9 A B C D E F
A B C D E F G H I J K L M N O P
4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15
0 PB0 21 c0 f6 f8 f7 5 4 3 2 1 =+
1 PB1 22 c1 f3 f5 f4 t r e w q TAB
2 PB2 23 c2 ESC f2 f1 g f d s a CL
3 PB3 24 c3 f9 f11 f10 b v c x z LS UP DN [{ ]}
4 PB4 25 c4 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
5 PB5 26 c5 PB PGM KPD LA HM END y u i o p \
6 PB6 27 c6 LC DEL BS RC ENT SP h j k l ;: '"
7 PB7 28 c7 RA PU PD n m ,< .> /? RS
*/
#endif

View File

@ -1,42 +1,12 @@
kinesis-advantage keyboard firmware
======================
# Firmware for the Kinesis advantage keyboard
## Kinesis specific information
This is a port of https://github.com/alvicstep/tmk_keyboard,
which is a fork of https://github.com/wjanssens/tmk_keyboard,
which is based on work from https://github.com/chrisandreae/keyboard-firmware
There are at least two different ways to replace the controller in this keyboard.
If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK.
I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead.
The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg.
Not yet implemented:
- Kinesis EEProm reading or writing
- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
The alvicstep folder contains docs and configuration for directly wiring a Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from.
## Keymaps
Both hardware solutions should work with the same keymaps
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make default`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
$ make [default|jack|<name>]
```
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

View File

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../../Makefile
endif

View File

@ -0,0 +1,50 @@
#ifndef STAPELBERG_CONFIG_H
#define STAPELBERG_CONFIG_H
#include "../config.h"
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0002
/* key matrix size */
#define MATRIX_ROWS 15
#define MATRIX_COLS 7
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* don't know if this should be defined at the board or top level. Assuming board
#define MOUSEKEY_DELAY 100
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_MAX_SPEED 3
#define MOUSEKEY_TIME_TO_MAX 10
*/
#define IGNORE_MOD_TAP_INTERRUPT
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

Binary file not shown.

After

Width:  |  Height:  |  Size: 126 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 96 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 117 KiB

View File

@ -0,0 +1,55 @@
# kinesis_stapelberg keyboard firmware
This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
The controller board hardware is described
[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
Mapping the pin assignments was done using the corresponding matrix description provided at this
[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
This code makes no attempt to drive the four LEDs provided on the controller board.
## Building the Hardware
If you want to perform this customization, these parts may be helpful.
| Function | Quantity | Vendor | Part Number |
| ------------------------------------------------------ | -------- | ------- | ------------ |
| 13 pin connector for function keys and finger keywells | 4 | Digi-Key | WM14526-ND |
| 10 pin headers for thumb clusters | 4 | Digi-Key | 609-3250-ND |
| 8 pin cable for thumb clusters | 2 | Digi-Key | SAM8928-ND |
| Teensy++ 2.0 | 1 | Digi-Key | 1528-1056-ND |
| 2 pin right angle header for reset | 1 | Digi-Key | 3M9467-ND |
| Reset cables | 2 | Sparkfun | PRT-09140 |
The board and connections are shown here
![](images/controller_board.jpg)
The Teensy mounting detail can be seen here.
I used a socket for prototyping.
![](images/teensy_detail.jpg)
Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
Shorting these two pins together will reset the board.
I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
The exterior cables can be seen here.
![](images/exterior_reset.jpg)
## Keymaps
### Default
To build with the default keymap, run `make default` while in the
`kinesis_stapelberg` working directory.
### Dvorak
This keymap contains a dvorak implementation as well as media and symbol layers.
Run `make dvorak` while in the `kinesis_stapelberg` working directory.

View File

@ -0,0 +1,10 @@
ifndef QUANTUM_DIR
include ../../../Makefile
endif
# just silently stop, since we need to upload with teensy uploader
upload: build

View File

@ -0,0 +1,28 @@
#include "stapelberg.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

View File

@ -0,0 +1,72 @@
#ifndef KINESIS_STAPELBERG_H
#define KINESIS_STAPELBERG_H
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguments as on the physical keyboard
// The second converts the arguments into the 2-D scanned array
#define KEYMAP( \
kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2, \
k00,k10,k20,k30,k40,k50, \
k01,k11,k21,k31,k41,k51, \
k02,k12,k22,k32,k42,k52, \
k03,k13,k23,k33,k43,k53, \
k14,k24,k34,k54, \
k56,k55, \
k35, \
k36,k46,k25, \
kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5, \
k60,k70,k80,k90,kA0,kB0, \
k61,k71,k81,k91,kA1,kB1, \
k62,k72,k82,k92,kA2,kB2, \
k63,k73,k83,k93,kA3,kB3, \
k64,k84,k94,kA4, \
k96,k85, \
k86, \
k66,k75,k65 \
) { \
{ k00, k01, k02, k03, KC_NO, KC_NO, KC_NO }, \
{ k10, k11, k12, k13, k14, KC_NO, KC_NO }, \
{ k20, k21, k22, k23, k24, k25, KC_NO }, \
{ k30, k31, k32, k33, k34, k35, k36 }, \
{ k40, k41, k42, k43, KC_NO, KC_NO, k46 }, \
{ k50, k51, k52, k53, k54, k55, k56 }, \
{ k60, k61, k62, k63, k64, k65, k66 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO }, \
{ k80, k81, k82, k83, k84, k85, k86 }, \
{ k90, k91, k92, k93, k94, KC_NO, k96 }, \
{ kA0, kA1, kA2, kA3, kA4, KC_NO, KC_NO }, \
{ kB0, kB1, kB2, kB3, KC_NO, KC_NO, KC_NO }, \
{ kC0, kC1, kC2, kC3, kC4, kC5, KC_NO }, \
{ kD0, kD1, kD2, kD3, kD4, kD5, KC_NO }, \
{ kE0, kE1, kE2, kE3, kE4, kE5, KC_NO } \
}
/*
This is the Stapelberg matrix as published at
https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
Along with the pins for each row and column
PB0 PB1 PB2 PB3 PB4 PB5 PB6
kx0 kx1 kx2 kx3 kx4 kx5 kx6
PD0 k0x Row: EQL TAB CAP LSH X2 -- --
PD1 k1x Row: 1 Q A Z BQ -- --
PD2 k2x Row: 2 W S X INS END --
PD3 k3x Row: 3 E D C LFT HOM BAK
PD4 k4x Row: 4 R F V -- -- DEL
PD5 k5x Row: 5 T G B RT LAL LCT
PD6 k6x Row: 6 Y H N UP SPC PGD
PD7 k7x Row: 7 U J M -- RET --
PB0 k8x Row: 8 I K COM DWN RCT PGU
PB1 k9x Row: 9 O L PER LBR -- RAL
PB2 kAx Row: 0 P SEM SLA RBR -- --
PB3 kBx Row: MIN BSL APO RSH X1 -- --
PB4 kCx Row: ESC F3 F6 F9 F12 PAU --
PB5 kDx Row: F1 F4 F7 F10 PRT PRG --
PB6 kEx Row: F2 F5 F8 F11 SLK KEY --
*/
#endif

View File

@ -1,6 +1,3 @@
# Please remove if no longer applicable
$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD)
$(warning Please disable some options in the Makefile to resolve)
# Build Options
@ -10,7 +7,7 @@ $(warning Please disable some options in the Makefile to resolve)
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality

View File

@ -81,6 +81,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* prevent the modifiers from being stuck, sacrificing some memory */
#define PREVENT_STUCK_MODIFIERS
/* A larger buffer for the dynamic macros as this keymap is not taking
* up that much memory.
*/
#define DYNAMIC_MACRO_SIZE 256
#ifdef SUBPROJECT_rev3
#include "rev3/config.h"
#endif

View File

@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_PPG] = { /* Pure Pro: Gaming */
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, DF(_RS), _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, XXXXXXX, _______, KM_RS , _______, _______, KM_LW , _______, _______, _______, _______},
},
[_NM] = { /* Numeric */
@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{_______, _______, KC_LGUI, KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______}
},
[_DYN]= { /* special */
{_______, DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, _______, KC_INS, _______, KC_PSCR, KC_PAUS},
{_______, DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, KC_APP, KC_INS, _______, KC_PSCR, KC_PAUS},
{_______, DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______, _______, _______, _______, _______, KC_CAPS, KC_SLCK, KC_NLCK},
{KM_SHLK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}

View File

@ -51,5 +51,6 @@ These keyboards are part of the QMK repository, but their manufacturers are not
* [S60-x](/keyboards/s60-x) &mdash; DIY compact keyboard designed by VinnyCordeiro for Sentraq.
* [Satan](/keyboards/satan) &mdash; A GH60 variant.
* [SixKeyBoard](/keyboards/sixkeyboard) &mdash; A 6-key keyboard made by TechKeys.
* [TheVan 44](/keyboars/tv44) &mdash; A 44-key staggered keybard by Evangs.
* [TheVan 44](/keyboards/tv44) &mdash; A 44-key staggered keybard by Evangs.
* [WhiteFox](/keyboards/whitefox) &mdash; A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
* [Vision Division](/keyboards/vision_division) &mdash; Full Size / Split Linear Keyboard by IBNobody.

View File

@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
{MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
},
[_DV] = { /* Dvorak */

View File

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

View File

@ -0,0 +1 @@
#define KIIBOHD_BOOTLOADER

524
keyboards/whitefox/chconf.h Normal file
View File

@ -0,0 +1,524 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#define CH_CFG_ST_RESOLUTION 32
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 100000
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 0
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 20
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMPOOLS TRUE
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#define CH_CFG_USE_DYNAMIC TRUE
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_STATISTICS FALSE
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_CHECKS FALSE
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_ASSERTS FALSE
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#define CH_DBG_ENABLE_STACK_CHECK FALSE
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

View File

@ -0,0 +1,78 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define PREVENT_STUCK_MODIFIERS
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0F0F
#define DEVICE_VER 0x0001
/* in python2: list(u"whatever".encode('utf-16-le')) */
/* at most 32 characters or the ugly hack in usb_main.c borks */
#define MANUFACTURER "Input Club"
#define USBSTR_MANUFACTURER 'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00'
#define PRODUCT "WhiteFox/QMK"
#define USBSTR_PRODUCT 'W', '\x00', 'h', '\x00', 'i', '\x00', 't', '\x00', 'e', '\x00', 'F', '\x00', 'o', '\x00', 'x', '\x00', ' ', '\x00'
/* key matrix size */
#define MATRIX_ROWS 9
#define MATRIX_COLS 8
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Keymap for Infinity prototype */
//#define INFINITY_PROTOTYPE
/* Keymap for Infinity 1.1a (first revision with LED support) */
//#define INFINITY_LED
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View File

@ -0,0 +1,353 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB TRUE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

View File

@ -0,0 +1,51 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "whitefox.h"
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,---------------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins|
* |---------------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del|
* |---------------------------------------------------------------|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU|
* |---------------------------------------------------------------|
* |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD|
* |---------------------------------------------------------------|
* |Ctrl|Gui |Alt | Space |Fn0 |Alt |Gui | |Lef|Dow|Rig|
* `---------------------------------------------------------------'
*/
[0] = KEYMAP( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_INS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, KC_DEL, \
KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_FN0, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \
),
[1] = KEYMAP( \
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_MUTE,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP,KC_VOLD,\
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_HOME,KC_PGDN,KC_END \
),
};
const uint16_t fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1),
};

View File

@ -0,0 +1,92 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "whitefox.h"
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,---------------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins|
* |---------------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del|
* |---------------------------------------------------------------|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU|
* |---------------------------------------------------------------|
* |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD|
* |---------------------------------------------------------------|
* |Ctrl|Gui |Alt | Space |Fn0 |Alt |Gui | |Lef|Dow|Rig|
* `---------------------------------------------------------------'
*/
[0] = KEYMAP( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_MUTE,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, KC_DEL, \
KC_FN0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_FN1, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \
),
[1] = KEYMAP( \
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DEL , KC_INS ,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP,KC_VOLD,\
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_HOME,KC_PGDN,KC_END \
),
[2] = KEYMAP( \
KC_SLEP,KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN2, \
KC_TRNS,KC_TRNS,KC_FN5 ,KC_FN6 ,KC_TRNS,KC_FN7 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_TRNS,KC_TRNS,KC_TRNS, KC_FN3, \
KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN4 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_MAIL,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS \
),
};
/* Give numbers some descriptive names */
#define ACTION_LEDS_ALL 1
#define ACTION_LEDS_GAME 2
const uint16_t fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1),
[1] = ACTION_LAYER_MOMENTARY(2),
[2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
[3] = ACTION_FUNCTION(ACTION_LEDS_GAME),
[4] = ACTION_USAGE_CONSUMER(0x1B4),
[5] = ACTION_USAGE_CONSUMER(0x196),
[6] = ACTION_USAGE_CONSUMER(0x1A6),
[7] = ACTION_USAGE_CONSUMER(0x1A0),
};
/* custom action function */
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
/*
(void)opt;
switch(id) {
case ACTION_LEDS_ALL:
if(record->event.pressed) {
// signal the LED controller thread
chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_GAME:
if(record->event.pressed) {
// signal the LED controller thread
chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
}
break;
}
*/
}

24
keyboards/whitefox/led.c Normal file
View File

@ -0,0 +1,24 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "led.h"
void led_set(uint8_t usb_led) {
}

132
keyboards/whitefox/matrix.c Normal file
View File

@ -0,0 +1,132 @@
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "hal.h"
#include "timer.h"
#include "wait.h"
#include "print.h"
#include "matrix.h"
/*
* Matt3o's WhiteFox
* Column pins are input with internal pull-down. Row pins are output and strobe with high.
* Key is high or 1 when it turns on.
*
* col: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
* row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC8, PTC9, PTC10, PTC11 }
*/
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static bool debouncing = false;
static uint16_t debouncing_time = 0;
void matrix_init(void)
{
//debug_matrix = true;
/* Column(sense) */
palSetPadMode(GPIOD, 0, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 1, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 2, PAL_MODE_INPUT_PULLDOWN);
/* Row(strobe) */
palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 8, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
memset(matrix, 0, MATRIX_ROWS);
memset(matrix_debouncing, 0, MATRIX_ROWS);
}
uint8_t matrix_scan(void)
{
for (int row = 0; row < MATRIX_ROWS; row++) {
matrix_row_t data = 0;
// strobe row
switch (row) {
case 0: palSetPad(GPIOB, 2); break;
case 1: palSetPad(GPIOB, 3); break;
case 2: palSetPad(GPIOB, 18); break;
case 3: palSetPad(GPIOB, 19); break;
case 4: palSetPad(GPIOC, 0); break;
case 5: palSetPad(GPIOC, 8); break;
case 6: palSetPad(GPIOC, 9); break;
case 7: palSetPad(GPIOC, 10); break;
case 8: palSetPad(GPIOC, 11); break;
}
wait_us(20); // need wait to settle pin state
// read col data: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
data = ((palReadPort(GPIOC) & 0x06UL) << 5) |
((palReadPort(GPIOD) & 0xF0UL) >> 2) |
(palReadPort(GPIOD) & 0x03UL);
// un-strobe row
switch (row) {
case 0: palClearPad(GPIOB, 2); break;
case 1: palClearPad(GPIOB, 3); break;
case 2: palClearPad(GPIOB, 18); break;
case 3: palClearPad(GPIOB, 19); break;
case 4: palClearPad(GPIOC, 0); break;
case 5: palClearPad(GPIOC, 8); break;
case 6: palClearPad(GPIOC, 9); break;
case 7: palClearPad(GPIOC, 10); break;
case 8: palClearPad(GPIOC, 11); break;
}
if (matrix_debouncing[row] != data) {
matrix_debouncing[row] = data;
debouncing = true;
debouncing_time = timer_read();
}
}
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
for (int row = 0; row < MATRIX_ROWS; row++) {
matrix[row] = matrix_debouncing[row];
}
debouncing = false;
}
return 1;
}
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & (1<<col));
}
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
xprintf("\nr/c 01234567\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
xprintf("%X0: ", row);
matrix_row_t data = matrix_get_row(row);
for (int col = 0; col < MATRIX_COLS; col++) {
if (data & (1<<col))
xprintf("1");
else
xprintf("0");
}
xprintf("\n");
}
}

View File

@ -0,0 +1,54 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define K20x_MCUCONF
/*
* HAL driver system settings.
*/
/* Select the MCU clocking mode below by enabling the appropriate block. */
#define KINETIS_NO_INIT FALSE
/* PEE mode - 48MHz system clock driven by external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 72000000UL
#define KINETIS_SYSCLK_FREQUENCY 72000000UL
#define KINETIS_BUSCLK_FREQUENCY 36000000UL
#define KINETIS_FLASHCLK_FREQUENCY 24000000UL
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
#define KINETIS_USB_USB0_IRQ_PRIORITY 5
/*
* I2C driver settings
*/
#define KINETIS_I2C_USE_I2C0 TRUE
#define KINETIS_I2C_I2C0_PRIORITY 4
#endif /* _MCUCONF_H_ */

View File

@ -0,0 +1,7 @@
WhiteFox keyboard firmware
======================
This is an experimental port which came from the original TMK WhiteFox repo.
The LED controller was not ported, as the original was a dirty hack and it would
be good to have complete support.

View File

@ -0,0 +1,68 @@
# project specific files
SRC = matrix.c \
led.c
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
# - For Teensies, FAMILY = KINETIS and SERIES is either
# KL2x (LC) or K20x (3.0,3.1,3.2).
# - For Infinity KB, SERIES = K20x
MCU_FAMILY = KINETIS
MCU_SERIES = K20x
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
# - LDSCRIPT =
# - MKL26Z64 for Teensy LC
# - MK20DX128 for Teensy 3.0
# - MK20DX256 for Teensy 3.1 and 3.2
# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
MCU_LDSCRIPT = MK20DX256BLDR8
# Startup code to use
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
# - STARTUP =
# - kl2x for Teensy LC
# - k20x5 for Teensy 3.0 and Infinity KB
# - k20x7 for Teensy 3.1 and 3.2
MCU_STARTUP = k20x7
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
# - BOARD =
# - PJRC_TEENSY_LC for Teensy LC
# - PJRC_TEENSY_3 for Teensy 3.0
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
# - MCHCK_K20 for Infinity KB
BOARD = PJRC_TEENSY_3_1
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
MCU = cortex-m4
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
ARMV = 7
# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
OPT_DEFS =
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
#CONSOLE_ENABLE ?= yes # Console for debug
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover
CUSTOM_MATRIX ?= yes # Custom matrix file

View File

@ -0,0 +1,17 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "whitefox.h"

View File

@ -0,0 +1,54 @@
/*
Copyright 2014 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef WHITEFOX_H
#define WHITEFOX_H
#include "quantum.h"
/* WhiteFox
* ,---------------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins|
* |---------------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del|
* |---------------------------------------------------------------|
* |CapsL | A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU|
* |---------------------------------------------------------------|
* |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD|
* |---------------------------------------------------------------|
* |Ctrl|Gui |Alt | Space |App |Alt |Gui | |Lef|Dow|Rig|
* `---------------------------------------------------------------'
*/
#define KEYMAP( \
K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, K61, \
K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, K23, K33, \
K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, K64, K74, K84, K05, \
K15, K25, K35, K45, K55, K65, K75, K85, K06, K16, K26, K36, K46, K56, K66, \
K76, K86, K07, K17, K27, K37, K47, K57, K67, K77 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
{ K10, K11, K12, K13, K14, K15, K16, K17 }, \
{ K20, K21, K22, K23, K24, K25, K26, K27 }, \
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
{ K50, K51, K52, K53, K54, K55, K56, K57 }, \
{ K60, K61, K62, K63, K64, K65, K66, K67 }, \
{ K70, K71, K72, K73, K74, K75, K76, K77 }, \
{ K80, K81, K82, K83, K84, K85, K86, KC_NO } \
}
#endif

View File

@ -159,6 +159,8 @@ enum quantum_keycodes {
#define MEH(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT)
#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI)
#define ALTG(kc) (kc | QK_RCTL | QK_RALT)
#define SCMD(kc) (kc | QK_LGUI | QK_LSFT)
#define SWIN(kc) SCMD(kc)
#define MOD_HYPR 0xf
#define MOD_MEH 0x7
@ -293,6 +295,8 @@ enum quantum_keycodes {
#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui
#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
#define SCMD_T(kc) MT((MOD_LGUI | MOD_LSFT), kc)
#define SWIN_T(kc) SCMD_T(kc)
// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
#define KC_HYPR HYPR(KC_NO)

View File

@ -31,7 +31,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j
This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest:
* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirity of the readme has been moved here
* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirety of the readme has been moved here
* The readme for your own keyboard: This is found under `keyboards/<your keyboards's name>/`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on.
* The list of possible keycodes you can use in your keymap is actually spread out in a few different places:
* [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes.