_/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge of e6v2 stuff as well as my personal keymaps (#2434)

Browse source 
* Checkin of tada keymap and initial commit for e6v2.

* checking in other remaining changes before trying to merge

* Reverting pin change. This was done based on the json orginally provided by exclusive, but it was later determined my map was the correct one based on user testing

* fix extra key for ansi keymap. Didn't include fn as standard ansi shift is not split but still had it in keymap

* Fix default help file and add reset to default
This commit is contained in:
Jason Gorman 2018-02-28 13:22:53 -08:00 committed by Jack Humbert
parent 298ac18dfa
commit 19b02bf267
17 changed files with 609 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

65
keyboards/e6v2/config.h Normal file
View file

@ -0,0 +1,65 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0002
#define MANUFACTURER Exclusive / E-Team
#define PRODUCT E6-V2
#define DESCRIPTION E6-V2 QMK PCB (Mid-Port)
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/* QMK E6-V2 PCB default pin-out */
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B1 }
#define UNUSED_PINS { E6, B2, B3, B7 }
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 12
#define RGBLIGHT_VAL_STEP 12
#endif
#define BACKLIGHT_PIN B6
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 5
#define BACKLIGHT_BREAHTING
#define BREATHING_PERIOD 3
#endif
#define DIODE_DIRECTION COL2ROW
#define DEBOUNCING_DELAY 5
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

53
keyboards/e6v2/e6v2.c Normal file
View file

@ -0,0 +1,53 @@
#include "e6v2.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
DDRB |= (1<<6);
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
DDRB |= (1<<2);
PORTB &= ~(1<<2);
} else {
// Hi-Z
DDRB &= ~(1<<2);
PORTB &= ~(1<<2);
}
// DDRB |= (1<<7);
// DDRB |= (1<<1);
// DDRB |= (1<<3);
// DDRE |= (1<<6);
if (usb_led == 0){
PORTB |= (1<<6);
// PORTB |= (1<<7);
// PORTB |= (1<<1);
// PORTB |= (1<<3);
// PORTE |= (1<<6);
}
else{
PORTB &= ~(1<<6);
// PORTB &= ~(1<<7);
}
led_set_user(usb_led);
}

66
keyboards/e6v2/e6v2.h Normal file
View file

@ -0,0 +1,66 @@
#ifndef E6V2_H
#define E6V2_H
#include "quantum.h"
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K46, K4A, K4B, K4C, K4D \
)\
{\
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
}
#define KEYMAP_ANSI( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
K40, K41, K42, K46, K4A, K4B, K4C, K4D \
)\
{\
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
}
#define KEYMAP_HHKB( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K41, K42, K46, K4B, K4C \
)\
{\
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
{ KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
}
#define KEYMAP_HHKB_SPLITS( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K41, K42, K46, K4B, K4C \
)\
{\
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
{ KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
}
#endif

1
keyboards/e6v2/keymaps/amnesia0287/config.h Normal file
View file

@ -0,0 +1 @@
#include "../../config.h"

79
keyboards/e6v2/keymaps/amnesia0287/keymap.c Normal file
View file

@ -0,0 +1,79 @@
#include "e6v2.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _HLa 1
#define _HLb 2
#define _HL 3
#define _XL 4
enum hype_keycodes {
FN_HLa = SAFE_RANGE,
FN_HLb
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BL] = KEYMAP_HHKB(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_HLb,
KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, FN_HLa
),
[_HLa] = KEYMAP_HHKB(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS
),
[_HLb] = KEYMAP_HHKB(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS
),
[_HL] = KEYMAP_HHKB(
RGB_TOG, RGB_M_P, RGB_RMOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, BL_BRTG, BL_OFF, BL_STEP, BL_ON, BL_DEC, BL_INC, LALT(KC_F4),
RESET, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case FN_HLa:
if (record->event.pressed)
{
layer_on(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
case FN_HLb:
if (record->event.pressed)
{
layer_on(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
}
return true;
}

8
keyboards/e6v2/keymaps/amnesia0287/readme.md Normal file
View file

@ -0,0 +1,8 @@
amnesia0287's Keymap
===
Keymap Maintainer: [Jason Gorman](https://github.com/amnesia0287)
Difference from base layout: Primarily the HHKB-ness
Intended usage: Daily driver for programming

0
keyboards/e6v2/keymaps/amnesia0287/rules.mk Normal file
View file

1
keyboards/e6v2/keymaps/default/config.h Normal file
View file

@ -0,0 +1 @@
#include "../../config.h"

18
keyboards/e6v2/keymaps/default/keymap.c Normal file
View file

@ -0,0 +1,18 @@
#include "e6v2.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP_ANSI(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_MENU, KC_RCTL
),
[1] = KEYMAP_ANSI(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};

8
keyboards/e6v2/keymaps/default/readme.md Normal file
View file

@ -0,0 +1,8 @@
Default Keymap
===
Super simple default keymap with only a base layer.
Keymap Maintainer: [Jason Gorman](https://github.com/amnesia0287)
Intended usage: This is mostly provided for testing before you build your own keymap and as a reference to a stock(ish) configuration

0
keyboards/e6v2/keymaps/default/rules.mk Normal file
View file

18
keyboards/e6v2/readme.md Normal file
View file

@ -0,0 +1,18 @@
E6-V2
===
These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/)
Keyboard Maintainer: [Jason Gorman](https://github.com/amnesia0287)
Hardware Supported: E6-V2 Mid Port rev.qmk
Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
Make example for this keyboard (after setting up your build environment):
make e6v2:default
Or to make and flash:
make e6v2:default:dfu
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

68
keyboards/e6v2/rules.mk Normal file
View file

@ -0,0 +1,68 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = yes
MIDI_ENABLE = no # MIDI controls
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6

81
keyboards/s60_x/keymaps/amnesia0287/keymap.c Normal file
View file

@ -0,0 +1,81 @@
#include "rgb.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _HLa 1
#define _HLb 2
#define _HL 3
#define _XL 4
enum hype_keycodes {
FN_HLa = SAFE_RANGE,
FN_HLb
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: ANSI qwerty */
[_BL] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT , \
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, FN_HLb, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, FN_HLa, KC_RCTL
),
[_HLa] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_HLb] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_HL] = KEYMAP(
RGB_TOG, RGB_M_P, RGB_RMOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, BL_BRTG, BL_OFF, BL_STEP, BL_ON, BL_DEC, BL_INC, KC_TRNS, LALT(KC_F4),
RESET, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case FN_HLa:
if (record->event.pressed)
{
layer_on(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
case FN_HLb:
if (record->event.pressed)
{
layer_on(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
}
return true;
}

27
keyboards/s60_x/keymaps/amnesia0287/readme.md Normal file
View file

@ -0,0 +1,27 @@
### 1 Standard - ANSI
This is a variation of the default keymap with added RGB underglow and in-switch LED controls.
#### 1.0 Default layer
┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
#### 1.1 Fn layer
┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
│GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ │ │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│ │BLDEC│BLTOG│BLINC│▒▒▒▒▒│ │▒▒▒▒▒│
├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│
└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘

113
keyboards/tada68/keymaps/amnesia0287/keymap.c Normal file
View file

@ -0,0 +1,113 @@
#include "tada68.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _HLa 1
#define _HLb 2
#define _HL 3
#define _XL 4
#define _______ KC_TRNS
enum hype_keycodes {
FN_HLa = SAFE_RANGE,
FN_HLb
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer
* ,----------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` |
* |----------------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del |
* |----------------------------------------------------------------|
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
* |----------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn|
* |----------------------------------------------------------------|
* |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig |
* `----------------------------------------------------------------'
*/
[_BL] = KEYMAP_ANSI(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,KC_HOME, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS,KC_PGUP, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,KC_PGDN, \
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSPC,KC_UP,LT(_HLa, KC_END), \
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,FN_HLa,FN_HLb, KC_LEFT,KC_DOWN,KC_RGHT),
/* Keymap _HL: Hype Fn Layer
* ,----------------------------------------------------------------.
* | | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins |
* |----------------------------------------------------------------|
* | | |Up | | | | | | | | | | | |Hme |
* |----------------------------------------------------------------|
* | |<- |Dn | ->| | | | | | | | | |End |
* |----------------------------------------------------------------|
* | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR |
* |----------------------------------------------------------------|
* | | | | | | | |MsL|MsD|MsR |
* `----------------------------------------------------------------'
*/
[_HLa] = KEYMAP_ANSI(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,KC_INS, \
KC_CAPS,_______, KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,_______, _______,_______, \
_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN, _______,KC_PGUP,_______, \
_______, _______, _______, _______, _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
[_HLb] = KEYMAP_ANSI(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,KC_INS, \
KC_CAPS,_______, KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,_______, _______,_______, \
_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN, _______,KC_PGUP,_______, \
_______, _______, _______, _______, _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
[_HL] = KEYMAP_ANSI(
BL_TOGG, BL_DEC, BL_INC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LALT(KC_F4),MAGIC_UNSWAP_BACKSLASH_BACKSPACE, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,MAGIC_SWAP_BACKSLASH_BACKSPACE, \
_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_MNXT,_______, \
KC_MPRV, KC_MPLY, KC_MNXT, KC_MPLY, _______,_______,_______,KC_MRWD,KC_MPRV,KC_MFFD),
[_XL] = KEYMAP_ANSI(
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
_______, _______, _______, _______, _______,_______,_______,_______,_______,_______),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case FN_HLa:
if (record->event.pressed)
{
layer_on(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLa);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
case FN_HLb:
if (record->event.pressed)
{
layer_on(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
else
{
layer_off(_HLb);
update_tri_layer(_HLa, _HLb, _HL);
}
return false;
break;
}
return true;
}

3
keyboards/tada68/keymaps/amnesia0287/readme.md Normal file
View file

@ -0,0 +1,3 @@
# default TADA68 layout
This layout replicates the default factory layout of the TADA68.