From 403c139b34fe97f61eedb4a3cc4772d58bce0efc Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 7 Oct 2019 19:08:14 -0700 Subject: [PATCH] [Docs] Add AVR and ARM examples to GPIO Commands (#6942) * [Docs] Add AVR and ARM examples to GPIO Commands Add examples for reference for people not as well versed in microcontroller coding, such as myself. * Apply suggestions from code review Co-Authored-By: fauxpark Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/internals_gpio_control.md | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index 51a549f1c..8b8351382 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -6,18 +6,17 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`. -|Function |Description | -|----------------------|------------------------------------------------------------------| -|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) | -|`setPinInputHigh(pin)`|Set pin as input with build in pull-up | -|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)| -|`setPinOutput(pin)` |Set pin as output | -|`writePinHigh(pin)` |Set pin level as high, assuming it is an output | -|`writePinLow(pin)` |Set pin level as low, assuming it is an output | -|`writePin(pin, level)`|Set pin level, assuming it is an output | -|`readPin(pin)` |Returns the level of the pin | +|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples | +|----------------------|------------------------------------------------------------------|------------------------------------------------|-------------------------------------------------| +|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` | +|`setPinInputHigh(pin)`|Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` | +|`setPinInputLow(pin)` |Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` | +|`setPinOutput(pin)` |Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | +|`writePinHigh(pin)` |Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` | +|`writePinLow(pin)` |Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` | +|`writePin(pin, level)`|Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` | +|`readPin(pin)` |Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` | ## Advanced Settings Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used. -