diff --git a/keyboards/duck/orion/v3/config.h b/keyboards/duck/orion/v3/config.h index 3a17d5941..b04729712 100644 --- a/keyboards/duck/orion/v3/config.h +++ b/keyboards/duck/orion/v3/config.h @@ -37,11 +37,17 @@ along with this program. If not, see . #define DEBOUNCE 5 /* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 +// #define BACKLIGHT_LEVELS 3 + +#undef BACKLIGHT_PIN +#define BACKLIGHT_PINS { B1, B2, B3, E6 } +#define BACKLIGHT_LED_COUNT 4 +#define BACKLIGHT_LEVELS 10 +#define BACKLIGHT_ON_STATE 1 #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN D6 -#define RGBLED_NUM 17 +#define RGBLED_NUM 18 /* Set to top left most key */ #define BOOTMAGIC_LITE_ROW 4 diff --git a/keyboards/duck/orion/v3/keymaps/default/keymap.c b/keyboards/duck/orion/v3/keymaps/default/keymap.c index 83fa4f9a8..0da0cdaeb 100644 --- a/keyboards/duck/orion/v3/keymaps/default/keymap.c +++ b/keyboards/duck/orion/v3/keymaps/default/keymap.c @@ -16,11 +16,19 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_tkl_ansi(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT) \ +[0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(1),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT), + +[1] = LAYOUT_tkl_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_INC, BL_DEC, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; diff --git a/keyboards/duck/orion/v3/matrix.c b/keyboards/duck/orion/v3/matrix.c index 3c3240b9f..f93c7a9cd 100644 --- a/keyboards/duck/orion/v3/matrix.c +++ b/keyboards/duck/orion/v3/matrix.c @@ -14,13 +14,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include -#include -#include -#include "matrix.h" -#include "util.h" -#include "print.h" -#include "debug.h" +#include "quantum.h" static uint8_t debouncing = DEBOUNCE; @@ -54,18 +48,23 @@ void matrix_scan_user(void) { void backlight_init_ports(void) { - DDRD |= 0b11010000; - PORTD &= ~0b01010000; - PORTD |= 0b10000000; - DDRB |= 0b00011111; - PORTB &= ~0b00001110; - PORTB |= 0b00010001; - DDRE |= 0b01000000; - PORTE &= ~0b01000000; + +} + +void indicator_init_ports(void) { + + // Num LED + setPinOutput(B4); + + // Caps Lock + setPinOutput(B0); + + // Scroll Lock + setPinOutput(D7); } void matrix_init(void) { - backlight_init_ports(); + indicator_init_ports(); unselect_cols(); init_rows(); diff --git a/keyboards/duck/orion/v3/readme.md b/keyboards/duck/orion/v3/readme.md index 50032e93e..8d1b83401 100644 --- a/keyboards/duck/orion/v3/readme.md +++ b/keyboards/duck/orion/v3/readme.md @@ -3,9 +3,9 @@ Non official firmware for custom TKL Korean keyboard made by Duck. Group buy was run December 2018 via [geekhack](https://geekhack.org/index.php?topic=98581.0) with 100 keyboards total. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4 -Hardware Availability: Wait until GB of the next revision +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Duck Orion V3 PCB Ver 2.1 +* Hardware Availability: Wait until GB of the next revision Make example for this keyboard (after setting up your build environment): @@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment): **Reset Key:** To put the Orion V3 into reset, hold Backspace key (`K4N`) while plugging in. -**CAUTION:** At this time 10/03/19 lighting has not been tested fully and may not properly work. +**CAUTION:** At this time 12/19/19 layer indicator lighting has not been implemented by default. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). @@ -22,9 +22,9 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to The Orion V3 PCB consists of: ### Microchips -2 74HC237D 3-to-8 line decoders +2 74HC237D 3-to-8 line decoders U1, U2 1 Atmega32u4 microcontroller -2 WS2811 LED controller +2 WS2811 LED controller U5, U6 ## Notes -Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix. \ No newline at end of file +Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix, indicator LEDs, and backlight LEDs. diff --git a/keyboards/duck/orion/v3/v3.c b/keyboards/duck/orion/v3/v3.c index 95da4b45b..ca5c512ce 100644 --- a/keyboards/duck/orion/v3/v3.c +++ b/keyboards/duck/orion/v3/v3.c @@ -16,48 +16,26 @@ #include "v3.h" #include "indicator_leds.h" -enum BACKLIGHT_AREAS { - BACKLIGHT_ALPHAS = 0b00000010, - BACKLIGHT_MODNUM = 0b00001000 -}; +// Alphas PB1 +// Navigation Cluster: PB2 +// Number Row, Mods: PB3 +// Function Row: PE6 -void backlight_set(uint8_t level) { - switch(level) { - case 0: - PORTB |= BACKLIGHT_ALPHAS; - PORTB |= BACKLIGHT_MODNUM; - break; - case 1: - PORTB &= ~BACKLIGHT_ALPHAS; - PORTB |= BACKLIGHT_MODNUM; - break; - case 2: - PORTB |= BACKLIGHT_ALPHAS; - PORTB &= ~BACKLIGHT_MODNUM; - break; - case 3: - PORTB &= ~BACKLIGHT_ALPHAS; - PORTB &= ~BACKLIGHT_MODNUM; - break; - } -} +// Other than using RGB or LED matrix, QMK cannot turn on specific zones +// of backlight LEDs. Unfortunately, Duck PCBs do not follow this design +// and instead use multiple pins connected to each of these zones. QMK is +// only able to control them ALL with the current default mechanisms. -// Port from backlight_update_state -void led_set_kb(uint8_t usb_led) { - bool status[8] = { - IS_HOST_LED_ON(USB_LED_SCROLL_LOCK), /* LED 3 */ - IS_HOST_LED_ON(USB_LED_CAPS_LOCK), /* LED 2 */ - IS_HOST_LED_ON(USB_LED_NUM_LOCK), /* LED 1 */ - - layer_state & (1<<2), /* LED 6 */ - layer_state & (1<<1), /* LED 5 */ - layer_state & (1<<0) ? 0: 1, /* LED 4 */ - - layer_state & (1<<5), /* LED 8 */ - layer_state & (1<<4) /* LED 7 */ - }; - - indicator_leds_set(status); +// Locking indicator LEDs +// The Duck Orion V3 has 3 locking indicator LEDs and are located to the right +// of the Escape key. +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(B0, !led_state.caps_lock); + writePin(B4, !led_state.num_lock); + writePin(D7, !led_state.scroll_lock); + } + return true; } bool process_record_kb(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/duck/readme.md b/keyboards/duck/readme.md index caf7e156d..32076da7d 100644 --- a/keyboards/duck/readme.md +++ b/keyboards/duck/readme.md @@ -13,4 +13,5 @@ Jetfire V1 Lightsaver V3 Octagon V1 Octagon V2 +Orion V3 Viper V2 \ No newline at end of file