Merge remote-tracking branch 'refs/remotes/jackhumbert/master'
This commit is contained in:
IBNobody
commit
72e643998f
8 changed files with 313 additions and 30 deletions
66
keyboards/atreus/keymaps/jeremy/keymap.c
Normal file
66
keyboards/atreus/keymaps/jeremy/keymap.c
Normal file
|
|
@ -0,0 +1,66 @@
|
|||
// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer.
|
||||
|
||||
#include "atreus.h"
|
||||
#include "action_layer.h"
|
||||
#include "keymap_colemak.h"
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
#define ALPH 0
|
||||
#define NUMS 1
|
||||
#define CURS 2
|
||||
#define SYMB 3
|
||||
#define FKEY 4
|
||||
|
||||
// Some handy macros to keep the keymaps clean and easier to maintain
|
||||
#define KM_SAVE LGUI(CM_S)
|
||||
#define KM_CLSE LGUI(CM_W)
|
||||
#define KM_OPEN LGUI(CM_O)
|
||||
|
||||
#define KM_COPY LGUI(KC_C)
|
||||
#define KM_CUT LGUI(KC_X)
|
||||
#define KM_PAST LGUI(KC_V)
|
||||
#define KM_UNDO LGUI(KC_Z)
|
||||
#define KM_REDO LGUI(LSFT(KC_Z))
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[ALPH] = {
|
||||
{KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P},
|
||||
{KC_A, LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F, KC_G, KC_TRNS, KC_H, KC_J, LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN},
|
||||
{KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH},
|
||||
{KC_LCTL, KC_ESC, KC_NO, KC_LSFT, KC_SPC, KC_LGUI, KC_ENT, KC_RSFT, KC_NO, KC_ESC, KC_RCTL}
|
||||
},
|
||||
[NUMS] = {
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_ASTR, KC_SLSH, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_SLSH},
|
||||
{KC_TRNS, KC_TRNS, KC_EQL, KC_PLUS, KC_MINS, KC_TRNS, KC_LPRN, KC_4, KC_5, KC_6, KC_ASTR},
|
||||
{KC_TRNS, KC_TRNS, KC_DOT, KC_COMM, CM_SCLN, KC_TRNS, KC_RPRN, KC_1, KC_2, KC_3, KC_MINS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS}
|
||||
},
|
||||
[CURS] = {
|
||||
{KC_TRNS, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KM_SAVE, KC_TRNS, KM_OPEN, KC_TRNS},
|
||||
{KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_TRNS, KM_UNDO, KC_LALT, KC_TRNS, KC_LGUI, KC_TRNS},
|
||||
{KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_MPLY, KM_COPY, KM_REDO, KM_CLSE, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TAB, KM_CUT, KM_PAST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
},
|
||||
[SYMB] = {
|
||||
{KC_BSLS, KC_EXLM, KC_LABK, KC_RABK, CM_COLN, KC_TRNS, KC_UNDS, KC_DLR, KC_QUES, KC_TRNS, KC_PERC},
|
||||
{KC_AT, KC_AMPR, KC_LPRN, KC_RPRN, CM_SCLN, KC_TRNS, KC_COMM, KC_DOT, KC_QUOT, KC_TRNS, KC_TILD},
|
||||
{KC_HASH, KC_PIPE, KC_LCBR, KC_RCBR, KC_SLSH, KC_TRNS, KC_TRNS, KC_GRV, KC_DQT, KC_TRNS, KC_CIRC},
|
||||
{KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
},
|
||||
[FKEY] = {
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
}};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {}
|
||||
|
||||
return MACRO_NONE;
|
||||
};
|
||||
45
keyboards/atreus/keymaps/jeremy/readme.md
Normal file
45
keyboards/atreus/keymaps/jeremy/readme.md
Normal file
|
|
@ -0,0 +1,45 @@
|
|||
Jeremy's Atreus Key Mapping
|
||||
===========================
|
||||
|
||||
I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling.
|
||||
|
||||
My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015).
|
||||
|
||||
## Main Layers
|
||||
|
||||
1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac)
|
||||
2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5)
|
||||
3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4)
|
||||
4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973)
|
||||
5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89)
|
||||
|
||||
## Notes
|
||||
|
||||
### General
|
||||
|
||||
Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching.
|
||||
|
||||
I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory.
|
||||
|
||||
### Symbol Layer
|
||||
|
||||
1. I placed characters that deal with an if statement close together, such as !, & and |.
|
||||
2. All matching brace/bracket characters are together as well.
|
||||
|
||||
### Number Layer
|
||||
|
||||
1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could.
|
||||
2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key.
|
||||
3. Parentheses were added for typing on the calculator.
|
||||
|
||||
### Cursor Layer
|
||||
|
||||
1. It includes basic audio controls because they didn't really fit anywhere else
|
||||
2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard.
|
||||
3. It contains the backspace and delete keys right on top of the left and right arrows.
|
||||
4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word.
|
||||
|
||||
### Function Layer
|
||||
|
||||
1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row.
|
||||
2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved.
|
||||
70
keyboards/hhkb/keymaps/dbroqua/keymap.c
Normal file
70
keyboards/hhkb/keymaps/dbroqua/keymap.c
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* dbroqua HHKB Layout
|
||||
*/
|
||||
#include "hhkb.h"
|
||||
|
||||
#define BASE 0
|
||||
#define FN 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* BASE Level: Default Layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / | Left |Right|
|
||||
* +-----------------------------------------------------------------------------------------+
|
||||
* | Gui | Alt | Space | AltGr | fn |
|
||||
* `----------------------------------------------------------------´
|
||||
*/
|
||||
[BASE] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LEFT, KC_RGHT, \
|
||||
KC_LGUI, KC_LALT, /* */ KC_SPC, KC_RALT, MO(FN)
|
||||
),
|
||||
|
||||
/* BASE Level: Default Layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | Ins | Del|
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Caps | | | | | | | | | | | Up | | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | Vol-| Vol+| Mute| | | |PrtSc| Home| PgUp| Left |Right| |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | Prev| Play| Next| | | | | End |PgDwn| Down| Up | Down|
|
||||
* +-----------------------------------------------------------------------------------------+
|
||||
* | | | | | |
|
||||
* `----------------------------------------------------------------´
|
||||
*/
|
||||
[FN] = KEYMAP(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \
|
||||
KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_UP, KC_DOWN, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
9
keyboards/hhkb/keymaps/dbroqua/readme.md
Normal file
9
keyboards/hhkb/keymaps/dbroqua/readme.md
Normal file
|
|
@ -0,0 +1,9 @@
|
|||
# Dbroqua Layout
|
||||
|
||||
* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/78eaf35e80bb714eea80cb4049dedb01
|
||||
|
||||
# Programming Instructions:
|
||||
Enter into programming mode and run the following command.
|
||||
```
|
||||
$ sudo KEYMAP=dbroqua make dfu
|
||||
```
|
||||
|
|
@ -24,7 +24,9 @@ void matrix_init_kb(void) {
|
|||
};
|
||||
|
||||
void shutdown_user(void) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
stop_all_notes();
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,6 +3,9 @@
|
|||
|
||||
#include "../../config.h"
|
||||
|
||||
#define LEADER_TIMEOUT 300
|
||||
#define BACKLIGHT_BREATHING
|
||||
|
||||
/* cbbrowne user configuration */
|
||||
|
||||
#define randadd 53
|
||||
|
|
@ -16,5 +19,3 @@
|
|||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -65,10 +65,11 @@
|
|||
*/
|
||||
|
||||
enum layers {
|
||||
_QW = 0, /* Qwerty mapping */
|
||||
_LW, /* Lower layer, where top line has symbols !@#$%^&*() */
|
||||
_RS, /* Raised layer, where top line has digits 1234567890 */
|
||||
_KP, /* Key pad */
|
||||
_QWERTY = 0, /* Qwerty mapping */
|
||||
_LOWER, /* Lower layer, where top line has symbols !@#$%^&*() */
|
||||
_RAISE, /* Raised layer, where top line has digits 1234567890 */
|
||||
_KEYPAD, /* Key pad */
|
||||
_ADJUST, /* Special Adjust layer coming via tri-placement */
|
||||
};
|
||||
|
||||
enum macro_id {
|
||||
|
|
@ -76,36 +77,59 @@ enum macro_id {
|
|||
M_USERNAME,
|
||||
M_RANDDIGIT,
|
||||
M_RANDLETTER,
|
||||
M_VERSION
|
||||
M_VERSION,
|
||||
MACRO_UPPER,
|
||||
MACRO_LOWER,
|
||||
};
|
||||
|
||||
#define M_LOWER M(MACRO_LOWER)
|
||||
#define M_UPPER M(MACRO_UPPER)
|
||||
#define ROT_LED M(M_LED) /* Rotate LED */
|
||||
#define QWERTY DF(_QWERTY) /* Switch to QWERTY layout */
|
||||
#define KEYPAD DF(_KEYPAD) /* Switch to keypad */
|
||||
#define USERNAME M(M_USERNAME) /* shortcut for username */
|
||||
#define RANDDIG M(M_RANDDIGIT)
|
||||
#define RANDALP M(M_RANDLETTER)
|
||||
#define CTLENTER MT(MOD_RCTL, KC_ENT)
|
||||
#define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT)
|
||||
#define ALTRIGHT MT(MOD_LALT, KC_RGHT)
|
||||
#define MVERSION M(M_VERSION)
|
||||
|
||||
|
||||
/* Note that Planck has dimensions 4 rows x 12 columns */
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QW] = { /* Qwerty */
|
||||
[_QWERTY] = { /* Qwerty */
|
||||
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
{KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT)},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT },
|
||||
{KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
{KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTLENTER},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTQUOTE },
|
||||
{KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, M_UPPER, KC_LEFT, KC_DOWN, KC_UP, ALTRIGHT}
|
||||
/* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */
|
||||
},
|
||||
[_RS] = { /* RAISE */
|
||||
[_RAISE] = { /* RAISE */
|
||||
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
|
||||
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
[_LW] = { /* LOWER */
|
||||
[_LOWER] = { /* LOWER */
|
||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______},
|
||||
{_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______},
|
||||
{_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
[_KEYPAD] = { /* Key Pad */
|
||||
{KC_ESC, USERNAME, MVERSION, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
|
||||
{KC_LCTL, RANDDIG, KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
|
||||
{KC_LSFT, RANDALP, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER},
|
||||
{KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT}
|
||||
},
|
||||
[_KP] = { /* Key Pad */
|
||||
{KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
|
||||
{KC_LCTL, M(M_RANDDIGIT), KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
|
||||
{KC_LSFT, M(M_RANDLETTER), KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER},
|
||||
{BL_STEP, M(M_LED), KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT}
|
||||
|
||||
[_ADJUST] = { /* Adjustments - gonna shift the wild tools in here */
|
||||
{ROT_LED,USERNAME,MVERSION, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
|
||||
{_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
|
||||
{_______, RANDALP, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ },
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
|
||||
}
|
||||
};
|
||||
|
||||
|
|
@ -171,6 +195,39 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
|||
unregister_code (KC_A + rval);
|
||||
}
|
||||
break;
|
||||
case MACRO_UPPER:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_on(_RAISE);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
breathing_speed_set(2);
|
||||
breathing_pulse();
|
||||
#endif
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
else
|
||||
{
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
break;
|
||||
case MACRO_LOWER:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_on(_LOWER);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
breathing_speed_set(2);
|
||||
breathing_pulse();
|
||||
#endif
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
else
|
||||
{
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
break;
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,7 +24,26 @@ doing sundry experimentation:
|
|||
- Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random
|
||||
- Key [3][2] aka "z" uses a random number generator to select a letter a-z at random
|
||||
- Key [1][3] aka "e" spits out the keymap version number
|
||||
* Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping. I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-)
|
||||
* Trying out sgoodwin's "hold Enter down to get Shift"
|
||||
- Liking this Quite Well Enough...
|
||||
- Applied this to both Shift and Quote
|
||||
- It seems likely that Alt should get a right-hand-side, akin to this...
|
||||
- Alt needs to move, and get a RHS
|
||||
- Hence ALTRIGHT, and shifted ROT_LED over
|
||||
- Emacs likes this!!! :-)
|
||||
- I'm suspicious that I'll want to shift ROT_LED another location over,
|
||||
so some modifier can replace the OS/KC_LGUI key
|
||||
* I have added an alternate ADJUST layer that is activated via update_tri_layer()
|
||||
- e.g. - LOWER+RAISE simultaneously
|
||||
- This seems entirely more useful for handling my "special keys"
|
||||
like the random numbers, user name, and such, than the keypad layer
|
||||
* The _ADJUST layer provides a good place to have RESET
|
||||
- But this isn't strictly enough; I want RESET somewhat accessible from
|
||||
main layer lest an error hide that layer
|
||||
- I never use the OS/KC_LGUI key (that's Command on MacOS, Windows
|
||||
Key on Windows), so that's a good place to have it as a chord of
|
||||
some sort
|
||||
|
||||
|
||||
2. Some code structure ideas
|
||||
---------------------------------------------------
|
||||
|
|
@ -43,8 +62,8 @@ doing sundry experimentation:
|
|||
only need to fit 4 symbols onto each line, rather than 12.
|
||||
|
||||
I used enums to manage layer IDs and macro IDs so that I don't need
|
||||
to care (beyond "start at 0", and arguably that's not needed) about
|
||||
their values.
|
||||
to care (beyond "start at 0", and arguably even that's not needed)
|
||||
about their values.
|
||||
|
||||
3. Things I did not like about the default mapping
|
||||
---------------------------------------------------------
|
||||
|
|
@ -57,12 +76,27 @@ doing sundry experimentation:
|
|||
and shift ESC off the first column so KC_LCTL and KC_LALT can
|
||||
be on the first column.
|
||||
* I needed to swap ' and ENTER
|
||||
|
||||
4. Unuseful experiments
|
||||
---------------------------------------------------------
|
||||
|
||||
I have tried some things out that didn't turn out particularly well.
|
||||
I'll note some of these for posterity, hopefully helpful in not doing
|
||||
unwise things again...
|
||||
|
||||
* I tried added Workman alongside Dvorak and Colemak
|
||||
- Boy, oh boy, these don't help!!!
|
||||
- I have done 30 years of learning of Emacs key mappings, and
|
||||
these alternative keyboards massively mess me up
|
||||
|
||||
4. TODO
|
||||
* Space Cadet Shift; switching L_SHIFT to KC_LSP0, so that when I
|
||||
just hit SHIFT, I get a left parens. In principle, this is great
|
||||
for Lisping.
|
||||
- Unfortunately, there are times when mouse interfaces use SHIFT
|
||||
to allow selecting multiple items, and this really interferes
|
||||
with that
|
||||
|
||||
5. TODO
|
||||
---------------------------------------------------------
|
||||
|
||||
* I use tmux quite a lot; the mollat keymap seems to have some
|
||||
|
|
@ -77,4 +111,3 @@ doing sundry experimentation:
|
|||
* The jeebak keymap seems to have some neat ideas:
|
||||
- Number layer which is aggressive about having numbers in several places
|
||||
- Touch layer seems interesting
|
||||
* Trying out sgoodwin's "hold Enter down to get Shift"
|
||||
Loading…
Reference in a new issue