diff --git a/keyboards/naked60/config.h b/keyboards/naked60/config.h
index 47f2a9aac..cfb6bf4ff 100644
--- a/keyboards/naked60/config.h
+++ b/keyboards/naked60/config.h
@@ -19,25 +19,3 @@ along with this program. If not, see .
#pragma once
#include "config_common.h"
-
-// GCC include 'config.h" sequence in qmk_firmware/keyboards/naked60/
-// -include keyboards/naked60/config.h
-// -include keyboards/naked60/rev?/config.h
-// -include keyboards/naked60/rev?/keymaps/MAPNAME/config.h
-// XXXX.c
-
-#include
-
-// GCC include search path in qmk_firmare/keyboards/naked60/
-// #include "..." search starts here:
-// #include <...> search starts here:
-// keyboards/naked60/rev?/keymaps/MAPNAME
-// keyboards/naked60
-// keyboards/naked60/rev?
-// .
-// ./tmk_core
-// ......
-
-// MACRO and FUNCTION are features that are depreciated.
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
diff --git a/keyboards/naked60/keymaps/default/config.h b/keyboards/naked60/keymaps/default/config.h
index 140a79c77..4b3496d85 100644
--- a/keyboards/naked60/keymaps/default/config.h
+++ b/keyboards/naked60/keymaps/default/config.h
@@ -18,34 +18,5 @@
/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define USE_SERIAL_PD2
-
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/default/keymap.c b/keyboards/naked60/keymaps/default/keymap.c
index 4b15e969d..b8812090c 100644
--- a/keyboards/naked60/keymaps/default/keymap.c
+++ b/keyboards/naked60/keymaps/default/keymap.c
@@ -2,11 +2,6 @@
extern keymap_config_t keymap_config;
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -21,22 +16,11 @@ enum layer_number {
_ADJUST,
};
-enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- ADJUST,
- RGBRST
-};
-
enum tapdances{
TD_ESFL = 0,
TD_ESQW,
};
-// Layer Mode aliases
-
-#define KC_SNUBS S(KC_NUBS)
-#define KC_SNUHS S(KC_NUHS)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
@@ -53,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- ADJUST,KC_LCTRL, KC_LALT, KC_LGUI,MO(_LOWER),KC_SPC, KC_SPC,MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
+ MO(_ADJUST),KC_LCTRL, KC_LALT, KC_LGUI,MO(_LOWER),KC_SPC, KC_SPC,MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
//`------------------------------------------------------------------------------------------------------------'
),
@@ -81,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_SNUHS,KC_SNUBS, _______, _______, _______,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS), _______, _______, _______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
//`------------------------------------------------------------------------------------------------------------'
@@ -107,33 +91,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//,-----------------------------------------------------| |-----------------------------------------------------.
KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR),
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL),
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-uint32_t layer_state_set_user(uint32_t state) {
- return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+void matrix_init_user(void) {
+
}
-
-int RGB_current_mode;
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
- bool result = false;
- switch (keycode) {
- case ADJUST:
- update_tri_layer_state(record->event.pressed, _ADJUST, _RAISE, _LOWER);
- break;
- default:
- result = true;
- break;
- }
-
- return result;
-}
\ No newline at end of file
diff --git a/keyboards/naked60/keymaps/default/readme.md b/keyboards/naked60/keymaps/default/readme.md
index 87ce8b3a2..b5959919a 100644
--- a/keyboards/naked60/keymaps/default/readme.md
+++ b/keyboards/naked60/keymaps/default/readme.md
@@ -46,8 +46,8 @@
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|
| ESC| F2| F3| F4| F5| F6| | | F7| F8| F9| F10| F11| F12|
-| TILD| RST| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| BTN1| MS_U| BTN2| XXXXX|Alt+PSCR|
+| TILD| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| BTN1| MS_U| BTN2| XXXXX|Alt+PSCR|
| LSFT| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| MS_L| MS_D| MS_R| XXXXX| PSCR|
| LCTRL| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| C+A+D|
-| |ADJUST| LCTRL| LALT| LGUI| LOWER| SPC| SPC| RAISE| MNXT| VOLD| VOLU| MPLY| |
+| |ADJUST| LCTRL| LALT| LGUI| LOWER| RESET| RESET| RAISE| MNXT| VOLD| VOLU| MPLY| |
diff --git a/keyboards/naked60/keymaps/default_with_nafuda/config.h b/keyboards/naked60/keymaps/default_with_nafuda/config.h
index e188262cf..0761e5b6d 100644
--- a/keyboards/naked60/keymaps/default_with_nafuda/config.h
+++ b/keyboards/naked60/keymaps/default_with_nafuda/config.h
@@ -21,70 +21,7 @@
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
-
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define RGBLED_NUM 7
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for naked48 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
- //#define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- //#define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- //#define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- //#define RGBLIGHT_EFFECT_RGB_TEST
- //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/default_with_nafuda/keymap.c b/keyboards/naked60/keymaps/default_with_nafuda/keymap.c
index d50af530d..4738ef36e 100644
--- a/keyboards/naked60/keymaps/default_with_nafuda/keymap.c
+++ b/keyboards/naked60/keymaps/default_with_nafuda/keymap.c
@@ -2,11 +2,6 @@
extern keymap_config_t keymap_config;
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -24,13 +19,7 @@ enum layer_number {
};
enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- MOUSE,
- BROWSER,
- LOWER,
- RAISE,
- ADJUST,
- RGBRST
+ RGB_RST = SAFE_RANGE
};
enum tapdances{
@@ -38,41 +27,23 @@ enum tapdances{
TD_ESQW,
};
-// Fillers to make layering more clear
-
-#define KC_CAD LCA(KC_DEL)
-#define KC_APSCR LALT(KC_PSCR)
-
-#define KC_SNUBS S(KC_NUBS)
-#define KC_SNUHS S(KC_NUHS)
-
-#define KC_RTAB LCTL(KC_TAB)
-#define KC_LTAB LCTL(LSFT(KC_TAB))
-#define KC_CTAB LCTL(KC_W)
-#define KC_RETAB LCTL(LSFT(KC_T))
-
-#define KC_TGMO TG(_MOUSE)
-#define KC_TGBR TG(_BROWSER)
-#define KC_BSAD LT(_ADJUST, KC_BSPC)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
};
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TGMO,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_BSAD, KC_UP, KC_TGBR,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,LT(_ADJUST, KC_BSPC),KC_UP,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- ADJUST,KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
+ MO(_ADJUST),KC_LCTRL, KC_LALT, KC_LGUI,MO(_LOWER),KC_SPC,KC_SPC,MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
//`------------------------------------------------------------------------------------------------------------'
),
@@ -92,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MOUSE] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TGMO,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
@@ -106,11 +77,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BROWSER] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_CTAB,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LCTL(KC_W),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RETAB, KC_WH_U, KC_TGBR,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,LCTL(LSFT(KC_T)),KC_WH_U,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LTAB, KC_WH_D, KC_RTAB,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,LCTL(LSFT(KC_TAB)), KC_WH_D,LCTL(KC_TAB),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
@@ -120,13 +91,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TGMO,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL, KC_BSAD, KC_UP, KC_TGBR,
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL,LT(_ADJUST, KC_BSPC), KC_UP,TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_SNUHS,KC_SNUBS, _______, _______, _______,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______,_______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
//`------------------------------------------------------------------------------------------------------------'
@@ -134,9 +105,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_RAISE] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TGMO,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_BSAD, KC_UP, KC_TGBR,
+ KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,LT(_ADJUST, KC_BSPC), KC_UP,TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
@@ -150,37 +121,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_VAD,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), ADJUST, RGB_SAD, RGB_VAI,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), _ADJUST, RGB_SAD, RGB_VAI,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, RGB_MOD, RGB_TOG, RGB_SAI,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL),
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
- pressed ? layer_on(layer1) : layer_off(layer1);
- IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
-}
-
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool result = false;
switch (keycode) {
- case LOWER:
- update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
- break;
- case RAISE:
- update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
- break;
- case ADJUST:
- update_change_layer(record->event.pressed, _ADJUST, _RAISE, _LOWER);
- break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
@@ -189,7 +145,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
RGB_current_mode = rgblight_config.mode;
}
break;
- case RGBRST:
+ case RGB_RST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
@@ -206,7 +162,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void matrix_init_user(void) {
- #ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
- #endif
+
}
diff --git a/keyboards/naked60/keymaps/default_with_nafuda/readme.md b/keyboards/naked60/keymaps/default_with_nafuda/readme.md
index 574f90ffb..27201090d 100644
--- a/keyboards/naked60/keymaps/default_with_nafuda/readme.md
+++ b/keyboards/naked60/keymaps/default_with_nafuda/readme.md
@@ -2,30 +2,38 @@
Add Nafuda maps to the default layout.
-## Default
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| | MOUSE| |
-| BS+Ad| UP|Browser|
-| LEFT| DOWN| RIGHT|
+Default
+ //|--------------------|
+ Mouse,
+ //|------+------+------|
+ BS + Ad, UP,Browser,
+ //|------+------+------|
+ LEFT, DOWN, RIGHT
+ //|--------------------|
-## Mouse
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |Default| |
-| BTN1| MS_U| BTN2|
-| MS_L| MS_D| MS_R|
+Mouse
+ //|--------------------|
+ Default,
+ //|------+------+------|
+ BTN1, MS_U, BTN2,
+ //|------+------+------|
+ MS_L, MS_D, MS_R
+ //|--------------------|
-## Browser
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |CloseTAB| |
-|ReOpenTAB|WH_U|Default|
-| LTAB| WH_D| RTAB|
+Browser
+ //|--------------------|
+ CloseTAB,
+ //|------+------+------|
+ ReOpenTAB, WH_U,Default,
+ //|------+------+------|
+ LTAB, WH_D, RTAB
+ //|--------------------|
-## Adjust
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |LED_VAD| |
-|Default|LED_HUD|LED_VAI|
-|LED_MOD|LED_ON/Off|LED_HUI|
+Adjust
+ //|------------------------|
+ LED VAD,
+ //|------+----------+------|
+ Default, LED HUD,LED VAI,
+ //|------+----------+------|
+ LED MOD,LED ON/Off,LED HUI
+ //|------------------------|
diff --git a/keyboards/naked60/keymaps/default_with_nafuda/rules.mk b/keyboards/naked60/keymaps/default_with_nafuda/rules.mk
index 15a887e78..e69de29bb 100644
--- a/keyboards/naked60/keymaps/default_with_nafuda/rules.mk
+++ b/keyboards/naked60/keymaps/default_with_nafuda/rules.mk
@@ -1,10 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-# If your custom naked60 pcb, you can rewrite to yes.
-LED_ANIMATIONS = yes # LED animations
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
- # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
- OPT_DEFS += -DLED_ANIMATIONS
-endif
-
diff --git a/keyboards/naked60/keymaps/default_with_setta21/config.h b/keyboards/naked60/keymaps/default_with_setta21/config.h
index fe162510d..0761e5b6d 100644
--- a/keyboards/naked60/keymaps/default_with_setta21/config.h
+++ b/keyboards/naked60/keymaps/default_with_setta21/config.h
@@ -21,70 +21,7 @@
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
-
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define RGBLED_NUM 21
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for naked48 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
- //#define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- //#define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- //#define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- //#define RGBLIGHT_EFFECT_RGB_TEST
- //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/default_with_setta21/keymap.c b/keyboards/naked60/keymaps/default_with_setta21/keymap.c
index 06ea56501..0717d3c3f 100644
--- a/keyboards/naked60/keymaps/default_with_setta21/keymap.c
+++ b/keyboards/naked60/keymaps/default_with_setta21/keymap.c
@@ -22,15 +22,10 @@ enum layer_number {
};
enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- LOWER,
- RAISE,
- ADJUST,
- KANJI,
- RGBRST,
+ RGB_RST = SAFE_RANGE,
SEND_SUM,
- SEND_AVERAGE,
- SEND_COUNTIF,
+ SEND_AVE,
+ SEND_CIF,
SEND_MAX,
SEND_MIN
};
@@ -40,20 +35,6 @@ enum tapdances{
TD_ESQW,
};
-// Fillers to make layering more clear
-#define KC_SNUBS S(KC_NUBS)
-#define KC_SNUHS S(KC_NUHS)
-
-#define KC_SSUM SEND_SUM
-#define KC_SAVE SEND_AVERAGE
-#define KC_SCOU SEND_COUNTIF
-#define KC_SMAX SEND_MAX
-#define KC_SMIN SEND_MIN
-
-#define KC_RADO LT(_RAISE, KC_PDOT)
-#define KC_LOP0 LT(_LOWER, KC_P0)
-#define KC_ADNL LT(_ADJUST, KC_NLCK)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
@@ -62,15 +43,15 @@ qk_tap_dance_action_t tap_dance_actions[] = {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_with_setta21(
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_LOP0, KC_P1, KC_P4, KC_P7,KC_ADNL, KC_ESC,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,LT(_LOWER, KC_P0),KC_P1, KC_P4, KC_P7,KC_NLCK, KC_ESC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_P2, KC_P5, KC_P8,KC_PSLS, KC_F2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RADO, KC_P3, KC_P6, KC_P9,KC_PAST, KC_EQL,
+ KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,LT(_RAISE, KC_PDOT),KC_P3,KC_P6, KC_P9,KC_PAST, KC_EQL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_PENT, KC_PPLS,KC_PMNS, KC_DEL,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
- ADJUST,KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
+ MO(_ADJUST),KC_LCTRL, KC_LALT, KC_LGUI,MO(_LOWER), KC_SPC, KC_SPC,MO(_RAISE),KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT
//`------------------------------------------------------------------------------------------------------------'
),
@@ -90,78 +71,63 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = LAYOUT_with_setta21(
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER,XXXXXXX,KC_LEFT,XXXXXXX,XXXXXXX, KC_ESC,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(_LOWER),XXXXXXX,KC_LEFT,XXXXXXX,XXXXXXX, KC_ESC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL, KC_DOWN,KC_DOWN, KC_UP,KC_PSLS, KC_F2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, RAISE,XXXXXXX,KC_RIGHT,XXXXXXX,KC_PAST, KC_EQL,
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, MO(_RAISE),XXXXXXX,KC_RIGHT,XXXXXXX,KC_PAST,KC_EQL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_SNUHS,KC_SNUBS, _______, _______, _______, KC_PENT, KC_PPLS,KC_PMNS, KC_DEL,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______,_______, KC_PENT, KC_PPLS,KC_PMNS, KC_DEL,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
//`------------------------------------------------------------------------------------------------------------'
),
[_RAISE] = LAYOUT_with_setta21(
- //,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER, KC_F11, KC_F4, KC_F7,KC_SMIN, KC_ESC,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_F12, KC_F5, KC_F8,KC_SMAX, KC_F2,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, RAISE, KC_F3, KC_F6, KC_F9,KC_SCOU, KC_EQL,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, KC_RPRN, KC_SSUM,KC_SAVE, KC_DEL,
- //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
+ //,-----------------------------------------------------| |-----------------------------------------------------. |------------------------------------------------|
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_F11, KC_F4, KC_F7,SEND_MIN, KC_ESC,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+--------+-------|
+ KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_F12, KC_F5, KC_F8,SEND_MAX, KC_F2,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+--------+-------|
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______, KC_F3, KC_F6, KC_F9,SEND_CIF, KC_EQL,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+--------+-------|
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, KC_RPRN, SEND_SUM,SEND_AVE, KC_DEL,
+ //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |------------------------------------------------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
),
[_ADJUST] = LAYOUT_with_setta21( /* Base */
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER,RGB_VAD,RGB_HUD,RGB_SAD, ADJUST,RGB_TOG,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,RGB_VAD,RGB_HUD,RGB_SAD,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), RGB_VAI,RGB_HUI,RGB_SAI,XXXXXXX,_______,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), RGB_VAI,RGB_HUI,RGB_SAI,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, RAISE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, _______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
- _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL), RGB_MOD, _______,_______,_______,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL), RGB_MOD, RGB_TOG,_______,_______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
- pressed ? layer_on(layer1) : layer_off(layer1);
- IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
-}
-
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool result = false;
switch (keycode) {
- case LOWER:
- update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
- break;
- case RAISE:
- update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
- break;
- case ADJUST:
- update_change_layer(record->event.pressed, _ADJUST, _RAISE, _LOWER);
- break;
case SEND_SUM:
if (record->event.pressed) {
SEND_STRING("=SUM(");
}
break;
- case SEND_AVERAGE:
+ case SEND_AVE:
if (record->event.pressed) {
SEND_STRING("=AVERAGE(");
}
break;
- case SEND_COUNTIF:
+ case SEND_CIF:
if (record->event.pressed) {
SEND_STRING("=COUNTIF(");
}
@@ -184,7 +150,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
RGB_current_mode = rgblight_config.mode;
}
break;
- case RGBRST:
+ case RGB_RST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
@@ -201,7 +167,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void matrix_init_user(void) {
- #ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
- #endif
+
}
diff --git a/keyboards/naked60/keymaps/default_with_setta21/rules.mk b/keyboards/naked60/keymaps/default_with_setta21/rules.mk
index b714c8f51..e69de29bb 100644
--- a/keyboards/naked60/keymaps/default_with_setta21/rules.mk
+++ b/keyboards/naked60/keymaps/default_with_setta21/rules.mk
@@ -1,9 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-# If your custom naked60 pcb, you can rewrite to yes.
-LED_ANIMATIONS = yes # LED animations
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
- # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
- OPT_DEFS += -DLED_ANIMATIONS
-endif
diff --git a/keyboards/naked60/keymaps/salicylic/config.h b/keyboards/naked60/keymaps/salicylic/config.h
index 140a79c77..4b3496d85 100644
--- a/keyboards/naked60/keymaps/salicylic/config.h
+++ b/keyboards/naked60/keymaps/salicylic/config.h
@@ -18,34 +18,5 @@
/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define USE_SERIAL_PD2
-
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/salicylic/keymap.c b/keyboards/naked60/keymaps/salicylic/keymap.c
index 11d2e1431..17172f77b 100644
--- a/keyboards/naked60/keymaps/salicylic/keymap.c
+++ b/keyboards/naked60/keymaps/salicylic/keymap.c
@@ -3,11 +3,6 @@
extern keymap_config_t keymap_config;
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -22,25 +17,11 @@ enum layer_number {
_ADJUST,
};
-enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- LOWER,
- RAISE,
- ADJUST,
- RGBRST
-};
-
enum tapdances{
TD_ESFL = 0,
TD_ESQW,
};
-// Fillers to make layering more clear
-#define KC_CT11 LCTL_T(KC_F11)
-#define KC_SF12 SFT_T(KC_F12)
-#define KC_LOEN LT(_LOWER, KC_ENT)
-#define KC_RASP LT(_RAISE, KC_SPC)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
@@ -57,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN, KC_LOEN, KC_BSPC, KC_DEL, KC_RASP, KC_HENK, KC_LALT, KC_DOWN, KC_UP
+ KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN, LT(_LOWER,KC_ENT),KC_BSPC, KC_DEL,LT(_RAISE,KC_SPC), KC_HENK, KC_LALT, KC_DOWN, KC_UP
//`------------------------------------------------------------------------------------------------------------'
),
@@ -87,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
JP_CIRC, JP_PERC, JP_AMPR, JP_SCLN, JP_COLN, JP_PIPE, KC_0, KC_1, KC_2, KC_3, JP_PLUS, KC_ENT,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, KC_ZKHK, LOWER, _______, _______, RAISE, KC_0, JP_DOT, _______, _______
+ _______, _______, _______, KC_ZKHK,MO(_LOWER),_______,_______,MO(_RAISE),JP_DOT, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
),
@@ -98,9 +79,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_DEL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- KC_CT11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT,
+LCTL_T(KC_F11), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- KC_SF12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX,
+SFT_T(KC_F12), KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
@@ -110,38 +91,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//,-----------------------------------------------------| |-----------------------------------------------------.
KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR),
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTRL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL),
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
- pressed ? layer_on(layer1) : layer_off(layer1);
- IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
+uint32_t layer_state_set_user(uint32_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
-int RGB_current_mode;
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+void matrix_init_user(void) {
- bool result = false;
- switch (keycode) {
- case LOWER:
- update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
- break;
- case RAISE:
- update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
- break;
- default:
- result = true;
- break;
- }
-
- return result;
}
diff --git a/keyboards/naked60/keymaps/salicylic/readme.md b/keyboards/naked60/keymaps/salicylic/readme.md
index da2126381..2901dbf7f 100644
--- a/keyboards/naked60/keymaps/salicylic/readme.md
+++ b/keyboards/naked60/keymaps/salicylic/readme.md
@@ -6,19 +6,18 @@
| ESC(FLock) | 1| 2| 3| 4| 5| | | 6| 7| 8| 9| 0| BSPC|
| TAB | Q| W| E| R| T| | | Y| U| I| O| P| [|
|LCTRL | A| S| D| F| G| | | H| J| K| L| -| ]|
-| LSFT | Z| X| C| V| B| | | N| M| ,| .| /| \ |
-| | LEFT| RIGHT| LGUI| MHEN|Low+Ent| BSPC| DEL|Rai+SPC| HENK| LALT| UP| DOWN| |
-
+| LSFT | Z| X| C| V| B| | | N| M| ,| .| /| \|
+| | LEFT| RIGHT| LGUI| MHEN|LOWER, ENT|BSPC|DEL|RAISE,SPC|HENK| LALT| DOWN| UP| |
## FLock
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|
-| ESC(FLock)|F2| F3| F4| F5| F6| | | F7| F8| F9| F10| F11| _____|
+| ESC(FLock)| F2| F3| F4| F5| F6| | | F7| F8| F9| F10| F11| BSPC|
| TAB | Q| W| E| R| T| | | Y| U| I| O| P| [|
|LCTRL | A| S| D| F| G| | | H| J| K| L| -| ]|
-| LSFT | Z| X| C| V| B| | | N| M| ,| .| /| \ |
-| | LEFT| RIGHT| LGUI| MHEN|Low+Ent| BSPC| DEL|Rai+SPC| HENK| LALT| UP| DOWN| |
+| LSFT | Z| X| C| V| B| | | N| M| ,| .| /| \|
+| | LEFT| RIGHT| LGUI| MHEN|LOWER, ENT|BSPC|DEL|RAISE,SPC|HENK| LALT| DOWN| UP| |
## Lower
@@ -28,26 +27,25 @@
| :| !| ?| [| ]| ~| | | 6| 7| 8| 9| *| /|
| '| #| "| (| )| @| | | XXXXX| 4| 5| 6| -| =|
| ^| %| &| ;| :| PIPE| | | 0| 1| 2| 3| +| ENT|
-| | LEFT| RIGHT| LGUI| ZKHK| LOWER| BSPC| DEL| RAISE| 0| .| UP| DOWN| |
+| | LEFT| RIGHT| LGUI| ZKHK| LOWER| BSPC| DEL| RAISE| HENK| LALT| DOWN| UP| |
## Raise
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|
| ESC| F2| F3| F4| F5| F6| | | F7| F8| F9| F10| F11| F12|
-| ESC| 1| 2| 3| 4| 5| | | XXXXX| XXXXX| UP| XXXXX| PGUP| BSPC|
-|CtrlF11| F1| F2| F3| F4| F5| | | XXXXX| LEFT| DOWN| RIGHT| LSFT| ENT|
-|ShiftF12| F6| F7| F8| F9| F10| | | XXXXX| XXXXX| XXXXX| XXXXX| PGDN| XXXXX|
-| | LEFT| RIGHT| LGUI| ZKHK| LOWER| BSPC| DEL| RAISE| HENK| LALT| UP| DOWN| |
-
+| ESC| 1| 2| 3| 4| 5| | | 6| XXXXX| UP| XXXXX| PGUP| DEL|
+|F11,LCTRL| F1| F2| F3| F4| F5| | | XXXXX| LEFT| DOWN| RIGHT| LSFT| ENT|
+|F12,LSFT| F6| F7| F8| F9| F10| | | XXXXX| XXXXX| XXXXX| XXXXX| PGDN| XXXXX|
+| | LEFT| RIGHT| LGUI| MHEN| LOWER| BSPC| DEL| RAISE| HENK| LALT| DOWN| UP| |
## Adjust
-| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
-|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|
-| ESC| F2| F3| F4| F5| | | F6| F7| F8| F9| F10| F11| F12|
-| ESC| RST| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| BTN1| MS_U| BTN2| XXXXX|Alt+PSCR|
+| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
+|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:-----:|:----:|
+| ESC| F2| F3| F4| F5| F6| | | F7| F8| F9| F10| F11| F12|
+| ESC| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| BTN1| MS_U| BTN2| XXXXX|Alt+PSCR|
| LCTRL| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| MS_L| MS_D| MS_R| XXXXX| PSCR|
| LSFT| XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| | | XXXXX| XXXXX| XXXXX| XXXXX| XXXXX| C+A+D|
-| | LEFT| RIGHT| LGUI| ZKHK| LOWER| BSPC| DEL| RAISE| HENK| LALT| UP| DOWN| |
+| |ADJUST| LCTRL| LALT| LGUI| LOWER| RESET| RESET| RAISE| HENK| LALT| DOWN| UP| |
diff --git a/keyboards/naked60/keymaps/salicylic_with_nafuda/config.h b/keyboards/naked60/keymaps/salicylic_with_nafuda/config.h
index e188262cf..47da6d441 100644
--- a/keyboards/naked60/keymaps/salicylic_with_nafuda/config.h
+++ b/keyboards/naked60/keymaps/salicylic_with_nafuda/config.h
@@ -26,65 +26,3 @@
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define RGBLED_NUM 7
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for naked48 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
- //#define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- //#define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- //#define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- //#define RGBLIGHT_EFFECT_RGB_TEST
- //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/salicylic_with_nafuda/keymap.c b/keyboards/naked60/keymaps/salicylic_with_nafuda/keymap.c
index 33ccdf603..3a2cd9eb8 100644
--- a/keyboards/naked60/keymaps/salicylic_with_nafuda/keymap.c
+++ b/keyboards/naked60/keymaps/salicylic_with_nafuda/keymap.c
@@ -25,13 +25,7 @@ enum layer_number {
};
enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- MOUSE,
- BROWSER,
- LOWER,
- RAISE,
- ADJUST,
- RGBRST
+ RGB_RST = SAFE_RANGE
};
enum tapdances{
@@ -39,21 +33,6 @@ enum tapdances{
TD_ESQW,
};
-// Fillers to make layering more clear
-#define KC_CT11 LCTL_T(KC_F11)
-#define KC_SF12 SFT_T(KC_F12)
-#define KC_LOEN LT(_LOWER, KC_ENT)
-#define KC_RASP LT(_RAISE, KC_SPC)
-
-#define KC_RTAB LCTL(KC_TAB)
-#define KC_LTAB LCTL(LSFT(KC_TAB))
-#define KC_CTAB LCTL(KC_W)
-#define KC_RETAB LCTL(LSFT(KC_T))
-
-#define KC_TGMO TG(_MOUSE)
-#define KC_TGBR TG(_BROWSER)
-#define KC_BSAD LT(_ADJUST, KC_BSPC)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
@@ -62,15 +41,15 @@ qk_tap_dance_action_t tap_dance_actions[] = {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TGMO,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_LBRC, KC_BSAD, KC_UP, KC_TGBR,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_LBRC,LT(_ADJUST, KC_BSPC),KC_UP,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_MINS, JP_RBRC, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN, KC_LOEN, KC_BSPC, KC_DEL, KC_RASP, KC_HENK, KC_LALT, KC_DOWN, KC_UP
+ KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN,LT(_LOWER, KC_ENT), KC_BSPC, KC_DEL,LT(_RAISE, KC_SPC), KC_HENK, KC_LALT, KC_DOWN, KC_UP
//`------------------------------------------------------------------------------------------------------------'
),
@@ -90,7 +69,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MOUSE] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TGMO,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
@@ -104,11 +83,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BROWSER] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_CTAB,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LCTL(KC_W),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RETAB, KC_WH_U, KC_TGBR,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,LCTL(LSFT(KC_T)),KC_WH_U,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LTAB, KC_WH_D, KC_RTAB,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,LCTL(LSFT(KC_TAB)), KC_WH_D,LCTL(KC_TAB),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
@@ -118,27 +97,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TGMO,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- JP_COLN, JP_EXLM, JP_QUES, JP_LBRC, JP_RBRC, JP_TILD, KC_6, KC_7, KC_8, KC_9, JP_ASTR, JP_SLSH, KC_BSAD, KC_UP, KC_TGBR,
+ JP_COLN, JP_EXLM, JP_QUES, JP_LBRC, JP_RBRC, JP_TILD, KC_6, KC_7, KC_8, KC_9, JP_ASTR, JP_SLSH,LT(_ADJUST, KC_BSPC),KC_UP,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
JP_QUOT, JP_HASH, JP_DQT, JP_LPRN, JP_RPRN, JP_AT, XXXXXXX, KC_4, KC_5, KC_6, JP_MINS, JP_EQL, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
JP_CIRC, JP_PERC, JP_AMPR, JP_SCLN, JP_COLN, JP_PIPE, KC_0, KC_1, KC_2, KC_3, JP_PLUS, KC_ENT,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, KC_ZKHK, LOWER, _______, _______, RAISE, KC_0, JP_DOT, _______, _______
+ _______, _______, _______, KC_ZKHK,MO(_LOWER),_______,_______,MO(_RAISE), JP_DOT,_______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
),
[_RAISE] = LAYOUT_with_nafuda(
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TGMO,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TG(_MOUSE),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_DEL, KC_BSAD, KC_UP, KC_TGBR,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_DEL,LT(_ADJUST, KC_BSPC),KC_UP,TG(_BROWSER),
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- KC_CT11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT, KC_LEFT, KC_DOWN,KC_RIGHT,
+LCTL_T(KC_F11), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT, KC_LEFT, KC_DOWN,KC_RIGHT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
- KC_SF12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX,
+SFT_T(KC_F12), KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
@@ -148,21 +127,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//,-----------------------------------------------------| |-----------------------------------------------------. |--------------------------|
KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_VAD,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), ADJUST, RGB_SAD, RGB_VAI,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), _ADJUST, RGB_SAD, RGB_VAI,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------+--------+--------|
KC_LCTRL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, RGB_MOD, RGB_TOG, RGB_SAI,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |--------------------------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL),
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
- pressed ? layer_on(layer1) : layer_off(layer1);
- IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
+uint32_t layer_state_set_user(uint32_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
int RGB_current_mode;
@@ -170,12 +147,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool result = false;
switch (keycode) {
- case LOWER:
- update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
- break;
- case RAISE:
- update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
- break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
@@ -184,7 +155,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
RGB_current_mode = rgblight_config.mode;
}
break;
- case RGBRST:
+ case RGB_RST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
@@ -201,7 +172,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void matrix_init_user(void) {
- #ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
- #endif
+
}
diff --git a/keyboards/naked60/keymaps/salicylic_with_nafuda/readme.md b/keyboards/naked60/keymaps/salicylic_with_nafuda/readme.md
index 8c83f7ea3..17b973b73 100644
--- a/keyboards/naked60/keymaps/salicylic_with_nafuda/readme.md
+++ b/keyboards/naked60/keymaps/salicylic_with_nafuda/readme.md
@@ -2,31 +2,38 @@
Add Nafuda maps to the salicylic layout.
-## Default
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| | MOUSE| |
-| BS+Ad| UP|Browser|
-| LEFT| DOWN| RIGHT|
+Default
+ //|--------------------|
+ Mouse,
+ //|------+------+------|
+ BS + Ad, UP,Browser,
+ //|------+------+------|
+ LEFT, DOWN, RIGHT
+ //|--------------------|
-## Mouse
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |Default| |
-| BTN1| MS_U| BTN2|
-| MS_L| MS_D| MS_R|
+Mouse
+ //|--------------------|
+ Default,
+ //|------+------+------|
+ BTN1, MS_U, BTN2,
+ //|------+------+------|
+ MS_L, MS_D, MS_R
+ //|--------------------|
-## Browser
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |CloseTAB| |
-|ReOpenTAB|WH_U|Default|
-| LTAB| WH_D| RTAB|
-
-## Adjust
-| 1 | 2 | 3 |
-|:----:|:----:|:----:|
-| |LED_VAD| |
-|Default|LED_HUD|LED_VAI|
-|LED_MOD|LED_ON/Off|LED_HUI|
+Browser
+ //|--------------------|
+ CloseTAB,
+ //|------+------+------|
+ ReOpenTAB, WH_U,Default,
+ //|------+------+------|
+ LTAB, WH_D, RTAB
+ //|--------------------|
+Adjust
+ //|------------------------|
+ LED VAD,
+ //|------+----------+------|
+ Default, LED HUD,LED VAI,
+ //|------+----------+------|
+ LED MOD,LED ON/Off,LED HUI
+ //|------------------------|
diff --git a/keyboards/naked60/keymaps/salicylic_with_nafuda/rules.mk b/keyboards/naked60/keymaps/salicylic_with_nafuda/rules.mk
index b714c8f51..e69de29bb 100644
--- a/keyboards/naked60/keymaps/salicylic_with_nafuda/rules.mk
+++ b/keyboards/naked60/keymaps/salicylic_with_nafuda/rules.mk
@@ -1,9 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-# If your custom naked60 pcb, you can rewrite to yes.
-LED_ANIMATIONS = yes # LED animations
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
- # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
- OPT_DEFS += -DLED_ANIMATIONS
-endif
diff --git a/keyboards/naked60/keymaps/salicylic_with_setta21/config.h b/keyboards/naked60/keymaps/salicylic_with_setta21/config.h
index fe162510d..0761e5b6d 100644
--- a/keyboards/naked60/keymaps/salicylic_with_setta21/config.h
+++ b/keyboards/naked60/keymaps/salicylic_with_setta21/config.h
@@ -21,70 +21,7 @@
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
-
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 180
-
-#define RGBLED_NUM 21
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for naked48 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
- //#define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- //#define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- //#define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- //#define RGBLIGHT_EFFECT_RGB_TEST
- //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-#define MK_3_SPEED
-
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 0
-
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
-
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 3
-
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 0
-
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 1
-
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 0
diff --git a/keyboards/naked60/keymaps/salicylic_with_setta21/keymap.c b/keyboards/naked60/keymaps/salicylic_with_setta21/keymap.c
index 4d2618c52..a1f5a6e21 100644
--- a/keyboards/naked60/keymaps/salicylic_with_setta21/keymap.c
+++ b/keyboards/naked60/keymaps/salicylic_with_setta21/keymap.c
@@ -3,11 +3,6 @@
extern keymap_config_t keymap_config;
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -23,15 +18,10 @@ enum layer_number {
};
enum custom_keycodes {
- FLOCK = SAFE_RANGE,
- LOWER,
- RAISE,
- ADJUST,
- KANJI,
- RGBRST,
+ RGB_RST = SAFE_RANGE,
SEND_SUM,
- SEND_AVERAGE,
- SEND_COUNTIF,
+ SEND_AVE,
+ SEND_CIF,
SEND_MAX,
SEND_MIN
};
@@ -41,22 +31,6 @@ enum tapdances{
TD_ESQW,
};
-// Fillers to make layering more clear
-#define KC_CT11 LCTL_T(KC_F11)
-#define KC_SF12 SFT_T(KC_F12)
-#define KC_LOEN LT(_LOWER, KC_ENT)
-#define KC_RASP LT(_RAISE, KC_SPC)
-
-#define KC_SSUM SEND_SUM
-#define KC_SAVE SEND_AVERAGE
-#define KC_SCOU SEND_COUNTIF
-#define KC_SMAX SEND_MAX
-#define KC_SMIN SEND_MIN
-
-#define KC_RADO LT(_RAISE, KC_PDOT)
-#define KC_LOP0 LT(_LOWER, KC_P0)
-#define KC_ADNL LT(_ADJUST, KC_NLCK)
-
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_ESFL] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _FLOCK),
[TD_ESQW] = ACTION_TAP_DANCE_DUAL_ROLE(KC_ESC, _QWERTY),
@@ -65,15 +39,15 @@ qk_tap_dance_action_t tap_dance_actions[] = {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_with_setta21(
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_LOP0, KC_P1, KC_P4, KC_P7,KC_ADNL, KC_ESC,
+ TD(TD_ESFL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,LT(_LOWER, KC_P0),KC_P1, KC_P4, KC_P7,KC_NLCK, KC_ESC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_LBRC, KC_P2, KC_P5, KC_P8,KC_PSLS, KC_F2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_MINS, JP_RBRC, KC_RADO, KC_P3, KC_P6, KC_P9,KC_PAST, JP_EQL,
+ KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_MINS, JP_RBRC,LT(_RAISE, KC_PDOT),KC_P3,KC_P6, KC_P9,KC_PAST, JP_EQL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_PENT, KC_PPLS,KC_PMNS, KC_DEL,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
- KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN, KC_LOEN, KC_BSPC, KC_DEL, KC_RASP, KC_HENK, KC_LALT, KC_DOWN, KC_UP
+ KC_LEFT,KC_RIGHT, KC_LGUI, KC_MHEN, LT(_LOWER,KC_ENT),KC_BSPC, KC_DEL,LT(_RAISE,KC_SPC), KC_HENK, KC_LALT, KC_DOWN, KC_UP
//`------------------------------------------------------------------------------------------------------------'
),
@@ -93,75 +67,66 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = LAYOUT_with_setta21(
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER,XXXXXXX,KC_LEFT,XXXXXXX,XXXXXXX, KC_ESC,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(_LOWER),XXXXXXX,KC_LEFT,XXXXXXX,XXXXXXX, KC_ESC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
JP_COLN, JP_EXLM, JP_QUES, JP_LBRC, JP_RBRC, JP_TILD, KC_6, KC_7, KC_8, KC_9, JP_ASTR, JP_SLSH, KC_DOWN,KC_DOWN, KC_UP,KC_PSLS, KC_F2,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- JP_QUOT, JP_HASH, JP_DQT, JP_LPRN, JP_RPRN, JP_AT, XXXXXXX, KC_4, KC_5, KC_6, JP_MINS, JP_EQL, RAISE,XXXXXXX,KC_RIGHT,XXXXXXX,KC_PAST, JP_EQL,
+ JP_QUOT, JP_HASH, JP_DQT, JP_LPRN, JP_RPRN, JP_AT, XXXXXXX, KC_4, KC_5, KC_6, JP_MINS, JP_EQL, MO(_RAISE),XXXXXXX,KC_RIGHT,XXXXXXX,KC_PAST, JP_EQL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
JP_CIRC, JP_PERC, JP_AMPR, JP_SCLN, JP_COLN, JP_PIPE, KC_0, KC_1, KC_2, KC_3, JP_PLUS, KC_ENT, KC_PENT, KC_PPLS,KC_PMNS, KC_DEL,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
- _______, _______, _______, KC_ZKHK, LOWER, _______, _______, RAISE, KC_0, JP_DOT, _______, _______
+ _______, _______, _______, KC_ZKHK,MO(_LOWER),_______,_______,MO(_RAISE), JP_DOT,_______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
),
[_RAISE] = LAYOUT_with_setta21(
- //,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER, KC_F11, KC_F4, KC_F7,KC_SMIN, KC_ESC,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_DEL, KC_F12, KC_F5, KC_F8,KC_SMAX, KC_F2,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_CT11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT, RAISE, KC_F3, KC_F6, KC_F9,KC_SCOU, JP_EQL,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
- KC_SF12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX, JP_RPRN, KC_SSUM,KC_SAVE, KC_DEL,
- //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
+ //,-----------------------------------------------------| |-----------------------------------------------------. |------------------------------------------------|
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_F11, KC_F4, KC_F7,SEND_MIN, KC_ESC,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+--------+-------|
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_DEL, KC_F12, KC_F5, KC_F8,SEND_MAX, KC_F2,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+--------+-------|
+LCTL_T(KC_F11), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, KC_LSFT, KC_ENT, _______, KC_F3, KC_F6, KC_F9,SEND_CIF, JP_EQL,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+--------+-------|
+SFT_T(KC_F12), KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, XXXXXXX, JP_RPRN, SEND_SUM,SEND_AVE, KC_DEL,
+ //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |------------------------------------------------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
),
[_ADJUST] = LAYOUT_with_setta21( /* Base */
//,-----------------------------------------------------| |-----------------------------------------------------. |-----------------------------------------------|
- KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LOWER,RGB_VAD,RGB_HUD,RGB_SAD, ADJUST,RGB_TOG,
+ KC_ESC, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,RGB_VAD,RGB_HUD,RGB_SAD,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- _______, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), RGB_VAI,RGB_HUI,RGB_SAI,XXXXXXX,_______,
+ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX,LALT(KC_PSCR), RGB_VAI,RGB_HUI,RGB_SAI,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |-------+-------+-------+-------+-------+-------|
- KC_LCTRL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, RAISE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,
+ KC_LCTRL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, KC_PSCR, _______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| |---------------+---------------+-------+-------|
- KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL), RGB_MOD, _______,_______,_______,
+ KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,LCA(KC_DEL), RGB_MOD, RGB_TOG,_______,_______,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |-----------------------------------------------|
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______
//`------------------------------------------------------------------------------------------------------------'
)
};
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
- pressed ? layer_on(layer1) : layer_off(layer1);
- IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
+uint32_t layer_state_set_user(uint32_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
bool result = false;
switch (keycode) {
- case LOWER:
- update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
- break;
- case RAISE:
- update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
- break;
case SEND_SUM:
if (record->event.pressed) {
SEND_STRING("_SUM*");
}
break;
- case SEND_AVERAGE:
+ case SEND_AVE:
if (record->event.pressed) {
SEND_STRING("_AVERAGE*");
}
break;
- case SEND_COUNTIF:
+ case SEND_CIF:
if (record->event.pressed) {
SEND_STRING("_COUNTIF*");
}
@@ -184,7 +149,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
RGB_current_mode = rgblight_config.mode;
}
break;
- case RGBRST:
+ case RGB_RST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
@@ -201,7 +166,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void matrix_init_user(void) {
- #ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
- #endif
+
}
diff --git a/keyboards/naked60/keymaps/salicylic_with_setta21/readme.md b/keyboards/naked60/keymaps/salicylic_with_setta21/readme.md
index 0912d5431..1baa36703 100644
--- a/keyboards/naked60/keymaps/salicylic_with_setta21/readme.md
+++ b/keyboards/naked60/keymaps/salicylic_with_setta21/readme.md
@@ -6,7 +6,7 @@ Add Setta21 maps to the salicylic layout.
| 1 | 2 | 3 | 4 |
|:----:|:----:|:----:|:----:|
| ESC| F2| =| DEL|
-|Ad+Num| /| *| -|
+| Num| /| *| -|
| 7| 8| 9| |
| 4| 5| 6| +|
| 1| 2| 3| |
@@ -36,7 +36,7 @@ Add Setta21 maps to the salicylic layout.
| 1 | 2 | 3 | 4 |
|:----:|:----:|:----:|:----:|
| ESC| F2| =| DEL|
-|ADJUST| XXXXX| XXXXX| -|
+| XXXXX| XXXXX| XXXXX| -|
|LED_SAD|LED_SAI| XXXXX| |
|LED_HUD|LED_HUI| XXXXX| +|
|LED_VAD|LED_VAI| XXXXX| |
diff --git a/keyboards/naked60/keymaps/salicylic_with_setta21/rules.mk b/keyboards/naked60/keymaps/salicylic_with_setta21/rules.mk
index 15a887e78..e69de29bb 100644
--- a/keyboards/naked60/keymaps/salicylic_with_setta21/rules.mk
+++ b/keyboards/naked60/keymaps/salicylic_with_setta21/rules.mk
@@ -1,10 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-# If your custom naked60 pcb, you can rewrite to yes.
-LED_ANIMATIONS = yes # LED animations
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
- # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
- OPT_DEFS += -DLED_ANIMATIONS
-endif
-
diff --git a/keyboards/naked60/naked60.h b/keyboards/naked60/naked60.h
index fde791c5e..1b736feec 100644
--- a/keyboards/naked60/naked60.h
+++ b/keyboards/naked60/naked60.h
@@ -1,12 +1,7 @@
#pragma once
+#include "quantum.h"
+
#ifdef KEYBOARD_naked60_rev1
#include "rev1.h"
#endif
-
-#include "quantum.h"
-
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
diff --git a/keyboards/naked60/rev1/config.h b/keyboards/naked60/rev1/config.h
index 1724ef060..ac0c0ab2f 100644
--- a/keyboards/naked60/rev1/config.h
+++ b/keyboards/naked60/rev1/config.h
@@ -18,6 +18,7 @@ along with this program. If not, see .
#pragma once
+
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
@@ -26,94 +27,27 @@ along with this program. If not, see .
#define PRODUCT naked60
#define DESCRIPTION Ortholinear 60 Keys Keyboard
-/* Use I2C or Serial */
-//#define USE_I2C
-#define USE_SERIAL
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-// OLED support
-// see ./rules.mk: OLED_ENABLE=yes or no
-#ifdef OLED_ENABLE
- #define SSD1306OLED
-#endif
-
/* key matrix size */
#define MATRIX_ROWS 10
-#define MATRIX_COLS 14
+#define MATRIX_COLS 12
// Rows are doubled-up
#define MATRIX_ROW_PINS { B6, D1, D0, D4, C6 }
-
-// wiring of each half
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D7, E6, B4, B5, D3 }
-// #define MATRIX_COL_PINS { D3, B5, B4, E6, D7, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
+// When using Setta21
+#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B2 }
+#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5, B2, B2 }
+// When using Nafuda
+//#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, B6 }
+//#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, D7, E6, B4, B5, D3 }
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-
-// naked60 keyboard RGB LED support
-//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
-// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
-//#define RGBLED_NUM 21
-
-#ifndef IOS_DEVICE_ENABLE
- #define RGBLIGHT_LIMIT_VAL 180
- #define RGBLIGHT_VAL_STEP 17
-#else
- #define RGBLIGHT_LIMIT_VAL 50
- #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for naked60 keyboard
-// 120 RGBoff, OLEDoff
-// 120 OLED
-// 330 RGB 6
-// 300 RGB 32
-// 310 OLED & RGB 32
- #define USB_MAX_POWER_CONSUMPTION 400
-#else
- // fix iPhone and iPad power adapter issue
- // iOS device need lessthan 100
- #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/naked60/rev1/matrix.c b/keyboards/naked60/rev1/matrix.c
deleted file mode 100644
index 8685a8125..000000000
--- a/keyboards/naked60/rev1/matrix.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
-Copyright 2012 Jun Wako
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-/*
- * scan matrix
- */
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
- // initialize row and col
- unselect_rows();
- init_cols();
-
- TX_RX_LED_INIT;
- TXLED0;
- RXLED0;
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- is_master = has_usb();
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- int ret=serial_update_buffers(master_changed);
-#else
- int ret=serial_update_buffers();
-#endif
- if (ret ) {
- if(ret==2) RXLED1;
- return 1;
- }
- RXLED0;
- memcpy(&matrix[slaveOffset],
- (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- if (is_master) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
- memcpy(&matrix[offset],
- (void *)serial_master_buffer, sizeof(serial_master_buffer));
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
- int mchanged = 1;
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-// for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
-// i2c_slave_buffer[i] = matrix[offset+i];
-// }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- mchanged = memcmp((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
- #endif
- memcpy((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
-#endif
-
-#ifdef USE_MATRIX_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction(mchanged) ) {
-#endif
- // turn on the indicator led when halves are disconnected
- TXLED1;
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- TXLED0;
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- int change = 0;
- #endif
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- if( serial_slave_buffer[i] != matrix[offset+i] )
- change = 1;
- #endif
- serial_slave_buffer[i] = matrix[offset+i];
- }
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- slave_buffer_change_count += change;
- #endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/naked60/rev1/rev1.c b/keyboards/naked60/rev1/rev1.c
index 520a869e5..bce48f89c 100644
--- a/keyboards/naked60/rev1/rev1.c
+++ b/keyboards/naked60/rev1/rev1.c
@@ -1 +1,5 @@
-#include "rev1.h"
+#include "naked60.h"
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+};
diff --git a/keyboards/naked60/rev1/rev1.h b/keyboards/naked60/rev1/rev1.h
index 38e355cfc..d8ee83c47 100644
--- a/keyboards/naked60/rev1/rev1.h
+++ b/keyboards/naked60/rev1/rev1.h
@@ -4,11 +4,6 @@
#include "quantum.h"
-#ifdef RGBLIGHT_ENABLE
-//rgb led driver
-#include "ws2812.h"
-#endif
-
//////////////////////////////////////////////////////////////////////////////
// When only use naked60.
@@ -59,16 +54,16 @@
L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B \
) \
{ \
- { L00, L01, L02, L03, L04, L05, L06, L07, L08, L09, L0A, L0B,KC_NO,KC_NO }, \
- { L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L1A, L1B,KC_NO,KC_NO }, \
- { L20, L21, L22, L23, L24, L25, L26, L27, L28, L29, L2A, L2B,KC_NO,KC_NO }, \
- { L30, L31, L32, L33, L34, L35, L36, L37, L38, L39, L3A, L3B,KC_NO,KC_NO }, \
- { L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B,KC_NO,KC_NO }, \
- { R00, R01, R02, R03, R04, R05,KC_NO,KC_NO,KC_NO, R11, R12, R13, R14, R15 }, \
- { R20, R21, R22, R23, R24, R25,KC_NO,KC_NO, R30,KC_NO, R32,KC_NO, R34, R35 }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO } \
+ { L00, L01, L02, L03, L04, L05, L06, L07, L08, L09, L0A, L0B }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L1A, L1B }, \
+ { L20, L21, L22, L23, L24, L25, L26, L27, L28, L29, L2A, L2B }, \
+ { L30, L31, L32, L33, L34, L35, L36, L37, L38, L39, L3A, L3B }, \
+ { L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B }, \
+ { R00, R01, R02, R03, R04, R05,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ {KC_NO, R11, R12, R13, R14, R15,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ { R20, R21, R22, R23, R24, R25,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ { R30,KC_NO, R32,KC_NO, R34, R35,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO } \
}
//////////////////////////////////////////////////////////////////////////////
@@ -83,15 +78,15 @@
L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B \
) \
{ \
- { L00, L01, L02, L03, L04, L05, L06, L07, L08, L09, L0A, L0B,KC_NO,KC_NO }, \
- { L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L1A, L1B,KC_NO,KC_NO }, \
- { L20, L21, L22, L23, L24, L25, L26, L27, L28, L29, L2A, L2B,KC_NO,KC_NO }, \
- { L30, L31, L32, L33, L34, L35, L36, L37, L38, L39, L3A, L3B,KC_NO,KC_NO }, \
- { L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B,KC_NO,KC_NO }, \
- {KC_NO, R01,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, R10, R11, R12,KC_NO,KC_NO,KC_NO }, \
- { R20, R21, R22,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
- {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO } \
+ { L00, L01, L02, L03, L04, L05, L06, L07, L08, L09, L0A, L0B }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L1A, L1B }, \
+ { L20, L21, L22, L23, L24, L25, L26, L27, L28, L29, L2A, L2B }, \
+ { L30, L31, L32, L33, L34, L35, L36, L37, L38, L39, L3A, L3B }, \
+ { L40, L41, L42, L43, L44, L45, L46, L47, L48, L49, L4A, L4B }, \
+ {KC_NO, R01,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ { R10, R11, R12,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ { R20, R21, R22,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \
+ {KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO } \
}
diff --git a/keyboards/naked60/rev1/rules.mk b/keyboards/naked60/rev1/rules.mk
index a71181033..e69de29bb 100644
--- a/keyboards/naked60/rev1/rules.mk
+++ b/keyboards/naked60/rev1/rules.mk
@@ -1,3 +0,0 @@
-SRC += matrix.c \
- split_util.c \
- split_scomm.c
diff --git a/keyboards/naked60/rev1/serial_config.h b/keyboards/naked60/rev1/serial_config.h
deleted file mode 100644
index 37135213d..000000000
--- a/keyboards/naked60/rev1/serial_config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-//// #error rev2 serial config
-
-#ifndef SOFT_SERIAL_PIN
-/* Soft Serial defines */
-#define SOFT_SERIAL_PIN D2
-
-#define SERIAL_USE_MULTI_TRANSACTION
-#endif
diff --git a/keyboards/naked60/rev1/serial_config_simpleapi.h b/keyboards/naked60/rev1/serial_config_simpleapi.h
deleted file mode 100644
index e2d22a41e..000000000
--- a/keyboards/naked60/rev1/serial_config_simpleapi.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef SERIAL_CONFIG_SIMPLEAPI_H
-#define SERIAL_CONFIG_SIMPLEAPI_H
-
-#undef SERIAL_USE_MULTI_TRANSACTION
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-#endif // SERIAL_CONFIG_SIMPLEAPI_H
diff --git a/keyboards/naked60/rev1/split_scomm.c b/keyboards/naked60/rev1/split_scomm.c
deleted file mode 100644
index ada786796..000000000
--- a/keyboards/naked60/rev1/split_scomm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include
-#include
-#include
-#include
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
- #include
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
- /* master buffer not changed, only recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- 0, NULL,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
- /* master buffer changed need send, and recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define GET_SLAVE_BUFFER 2
- /* recive serial_slave_buffer */
- { (uint8_t *)&status1,
- 0, NULL,
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- }
-};
-
-void serial_master_init(void)
-{
- soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
- int status, smatstatus;
- static int need_retry = 0;
-
- if( s_change_old != s_change_new ) {
- smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
- if( smatstatus == TRANSACTION_END ) {
- s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
- uprintf("slave matrix = %b %b %b %b %b\n",
- serial_slave_buffer[0], serial_slave_buffer[1],
- serial_slave_buffer[2], serial_slave_buffer[3],
- serial_slave_buffer[4] );
-#endif
- }
- } else {
- // serial_slave_buffer dosen't change
- smatstatus = TRANSACTION_END; // dummy status
- }
-
- if( !master_update && !need_retry) {
- status = soft_serial_transaction(GET_SLAVE_STATUS);
- } else {
- status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
- }
- if( status == TRANSACTION_END ) {
- s_change_new = slave_buffer_change_count;
- need_retry = 0;
- } else {
- need_retry = 1;
- }
- return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/naked60/rev1/split_scomm.h b/keyboards/naked60/rev1/split_scomm.h
deleted file mode 100644
index 537ec4080..000000000
--- a/keyboards/naked60/rev1/split_scomm.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#pragma once
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
-
diff --git a/keyboards/naked60/rev1/split_util.c b/keyboards/naked60/rev1/split_util.c
deleted file mode 100644
index e1ff8b437..000000000
--- a/keyboards/naked60/rev1/split_util.c
+++ /dev/null
@@ -1,70 +0,0 @@
-#include
-#include
-#include
-#include
-#include
-#include
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else
-# include "split_scomm.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
- #ifdef EE_HANDS
- isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
- isLeftHand = !has_usb();
- #else
- isLeftHand = has_usb();
- #endif
- #endif
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_master_init();
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-bool has_usb(void) {
- USBCON |= (1 << OTGPADE); //enables VBUS pad
- _delay_us(5);
- return (USBSTA & (1<
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/naked60/rules.mk b/keyboards/naked60/rules.mk
index fc2fe3032..22dbd509b 100644
--- a/keyboards/naked60/rules.mk
+++ b/keyboards/naked60/rules.mk
@@ -1,5 +1,3 @@
-QUANTUM_LIB_SRC += serial.c
-
# MCU name
MCU = atmega32u4
@@ -19,9 +17,9 @@ BOOTLOADER = caterina
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
@@ -30,11 +28,11 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
TAP_DANCE_ENABLE = yes
-SUBPROJECT_rev1 = no
+OLED_DRIVER_ENABLE = no
USE_I2C = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-CUSTOM_MATRIX = yes
+SPLIT_KEYBOARD = yes
DEFAULT_FOLDER = naked60/rev1
diff --git a/keyboards/naked60/serial.c b/keyboards/naked60/serial.c
deleted file mode 100644
index 6006ebf1b..000000000
--- a/keyboards/naked60/serial.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include
-#include
-#include
-#include
-#include
-#include "serial.h"
-//#include
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
- // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
- #ifdef USE_I2C
- #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
- #error Using ATmega32U4 I2C, so can not use PD0, PD1
- #endif
- #endif
-
- #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
- #define SERIAL_PIN_DDR DDRD
- #define SERIAL_PIN_PORT PORTD
- #define SERIAL_PIN_INPUT PIND
- #if SOFT_SERIAL_PIN == D0
- #define SERIAL_PIN_MASK _BV(PD0)
- #define EIMSK_BIT _BV(INT0)
- #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
- #define SERIAL_PIN_INTERRUPT INT0_vect
- #elif SOFT_SERIAL_PIN == D1
- #define SERIAL_PIN_MASK _BV(PD1)
- #define EIMSK_BIT _BV(INT1)
- #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
- #define SERIAL_PIN_INTERRUPT INT1_vect
- #elif SOFT_SERIAL_PIN == D2
- #define SERIAL_PIN_MASK _BV(PD2)
- #define EIMSK_BIT _BV(INT2)
- #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
- #define SERIAL_PIN_INTERRUPT INT2_vect
- #elif SOFT_SERIAL_PIN == D3
- #define SERIAL_PIN_MASK _BV(PD3)
- #define EIMSK_BIT _BV(INT3)
- #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
- #define SERIAL_PIN_INTERRUPT INT3_vect
- #endif
- #elif SOFT_SERIAL_PIN == E6
- #define SERIAL_PIN_DDR DDRE
- #define SERIAL_PIN_PORT PORTE
- #define SERIAL_PIN_INPUT PINE
- #define SERIAL_PIN_MASK _BV(PE6)
- #define EIMSK_BIT _BV(INT6)
- #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
- #define SERIAL_PIN_INTERRUPT INT6_vect
- #else
- #error invalid SOFT_SERIAL_PIN value
- #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
- #endif
- uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
- { (uint8_t *)&status0,
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- #else
- 0, (uint8_t *)NULL,
- #endif
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- #else
- 0, (uint8_t *)NULL,
- #endif
- }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers()
-{
- int result;
- result = soft_serial_transaction();
- return result;
-}
-
-#endif // end of OLD API (compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
- // custom setup in config.h
- // #define TID_SEND_ADJUST 2
- // #define SERIAL_DELAY 6 // micro sec
- // #define READ_WRITE_START_ADJUST 30 // cycles
- // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
- #define TID_SEND_ADJUST 14
-#else
- #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 34 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 36 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
- // Ultra Low speed
- #define SERIAL_DELAY 48 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
- #define SLAVE_INT_ACK_WIDTH_UNIT 2
- #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-#else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
- serial_delay_half1(); // read the middle of pulses
- if( serial_read_pin() ) {
- byte = (byte << 1) | 1; p ^= 1;
- } else {
- byte = (byte << 1) | 0; p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb)? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
- if(data & b) {
- serial_high(); p ^= 1;
- } else {
- serial_low(); p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if(p & 1) { serial_high(); }
- else { serial_low(); }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data,8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); //3
- serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-#else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount,7);
- tid = bits>>3;
- bits = (bits&7) != nibble_bits_count(tid);
- if( bits || pecount> 0 || tid > Transaction_table_size ) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-#endif
-
- // target send phase
- if( trans->target2initiator_buffer_size > 0 )
- serial_send_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if( trans->initiator2target_buffer_size > 0 ) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size) ) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); //weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-#else
-int soft_serial_transaction(int sstd_index) {
- if( sstd_index > Transaction_table_size )
- return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-#else
- // send transaction table index
- int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while( !serial_read_pin() ) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for( int i = 0; serial_read_pin(); i++ ) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-#endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if( trans->target2initiator_buffer_size > 0 ) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size) ) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if( trans->initiator2target_buffer_size > 0 ) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;;
- sei();
- return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
diff --git a/keyboards/naked60/serial.h b/keyboards/naked60/serial.h
deleted file mode 100644
index 5deaf789e..000000000
--- a/keyboards/naked60/serial.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#pragma once
-
-#include
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE OLD API (compatible with let's split serial.c)
-// ex.
-// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-// #define SERIAL_MASTER_BUFFER_LENGTH 1
-//
-// //// USE NEW API
-// //// USE simple API (using signle-type transaction function)
-// #define SERIAL_USE_SINGLE_TRANSACTION
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
- #endif
-
- void serial_master_init(void);
- void serial_slave_init(void);
- int serial_update_buffers(void);
-
-#endif // end of USE OLD API
-////////////////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif