diff --git a/keyboard/Bantam44/Bantam44.c b/keyboard/Bantam44/Bantam44.c new file mode 100644 index 000000000..ad91401ee --- /dev/null +++ b/keyboard/Bantam44/Bantam44.c @@ -0,0 +1,25 @@ +#include "Bantam44.h" + +__attribute__ ((weak)) +void matrix_init_user(void) { + // leave these blank +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { + // leave these blank +} + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} \ No newline at end of file diff --git a/keyboard/Bantam44/Bantam44.h b/keyboard/Bantam44/Bantam44.h new file mode 100644 index 000000000..fa5b9df9e --- /dev/null +++ b/keyboard/Bantam44/Bantam44.h @@ -0,0 +1,29 @@ +#ifndef BANTAM44_H +#define BANTAM44_H + +#include "matrix.h" +#include "keymap_common.h" +#include "backlight.h" +#include + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, K2A }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37, K38 }, \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboard/Bantam44/Makefile b/keyboard/Bantam44/Makefile new file mode 100644 index 000000000..e7dea9f60 --- /dev/null +++ b/keyboard/Bantam44/Makefile @@ -0,0 +1,139 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = Bantam44 + + +# Directory common source filess exist +TOP_DIR = ../.. +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# # project specific files +SRC = Bantam44.c + +ifdef KEYMAP + SRC := keymaps/$(KEYMAP).c $(SRC) +else + SRC := keymaps/default.c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) +VPATH += $(TMK_DIR) + +include $(TOP_DIR)/quantum/quantum.mk + diff --git a/keyboard/Bantam44/README.md b/keyboard/Bantam44/README.md new file mode 100644 index 000000000..cd059a66c --- /dev/null +++ b/keyboard/Bantam44/README.md @@ -0,0 +1,24 @@ +Bantam44 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent README.md](/README.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboard/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top README.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|] +``` +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboard/Bantam44/config.h b/keyboard/Bantam44/config.h new file mode 100644 index 000000000..26d680704 --- /dev/null +++ b/keyboard/Bantam44/config.h @@ -0,0 +1,81 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bantam Keyboards +#define PRODUCT Bantam44 +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#define COLS (int []){ B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 } +#define ROWS (int []){ F0, D6, D4, D5 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/Bantam44/keymaps/default.c b/keyboard/Bantam44/keymaps/default.c new file mode 100644 index 000000000..17ade6241 --- /dev/null +++ b/keyboard/Bantam44/keymaps/default.c @@ -0,0 +1,30 @@ +#include "Bantam44.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Base */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, MO(1), KC_NO, KC_SPC, KC_NO, MO(2), KC_SCLN, KC_QUOT, KC_SLSH } + }, + [1] = { /* LOWER */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, + {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_END, KC_PGDN, KC_EXLM } + }, + [2] = { /* RAISE */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, + {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT } + } +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function +{ + return MACRO_NONE; +}; \ No newline at end of file diff --git a/keyboard/atomic/atomic.c b/keyboard/atomic/atomic.c index fa66266a4..30e812289 100644 --- a/keyboard/atomic/atomic.c +++ b/keyboard/atomic/atomic.c @@ -1,16 +1,16 @@ #include "atomic.h" __attribute__ ((weak)) -void * matrix_init_user(void) { +void matrix_init_user(void) { // leave these blank -}; +} __attribute__ ((weak)) -void * matrix_scan_user(void) { +void matrix_scan_user(void) { // leave these blank -}; +} -void * matrix_init_kb(void) { +void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up @@ -25,16 +25,12 @@ void * matrix_init_kb(void) { DDRE |= (1<<6); PORTE |= (1<<6); - if (matrix_init_user) { - (*matrix_init_user)(); - } -}; + matrix_init_user(); +} -void * matrix_scan_kb(void) { +void matrix_scan_kb(void) { // put your looping keyboard code here // runs every cycle (a lot) - if (matrix_scan_user) { - (*matrix_scan_user)(); - } -}; \ No newline at end of file + matrix_scan_user(); +} \ No newline at end of file diff --git a/keyboard/atomic/atomic.h b/keyboard/atomic/atomic.h index 95982ecad..d8574efa9 100644 --- a/keyboard/atomic/atomic.h +++ b/keyboard/atomic/atomic.h @@ -24,7 +24,7 @@ { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \ } -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); #endif \ No newline at end of file diff --git a/keyboard/atreus/atreus.c b/keyboard/atreus/atreus.c index bfc893084..9d1de631b 100644 --- a/keyboard/atreus/atreus.c +++ b/keyboard/atreus/atreus.c @@ -1,16 +1,16 @@ #include "atreus.h" __attribute__ ((weak)) -void * matrix_init_user(void) { +void matrix_init_user(void) { // leave these blank }; __attribute__ ((weak)) -void * matrix_scan_user(void) { +void matrix_scan_user(void) { // leave these blank }; -void * matrix_init_kb(void) { +void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up @@ -19,7 +19,7 @@ void * matrix_init_kb(void) { } }; -void * matrix_scan_kb(void) { +void matrix_scan_kb(void) { // put your looping keyboard code here // runs every cycle (a lot) diff --git a/keyboard/atreus/atreus.h b/keyboard/atreus/atreus.h index 9dd77859f..8d5989e44 100644 --- a/keyboard/atreus/atreus.h +++ b/keyboard/atreus/atreus.h @@ -22,7 +22,7 @@ { k2a, k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a } \ } -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); #endif diff --git a/keyboard/ergodox_ez/190hotfix.sh b/keyboard/ergodox_ez/190hotfix.sh new file mode 100755 index 000000000..bdc3adce2 --- /dev/null +++ b/keyboard/ergodox_ez/190hotfix.sh @@ -0,0 +1,19 @@ +#!/bin/bash +#a tool to fix broken keymaps as a result of pull request #190 +#changing the declaration of matrix_scan_user() and matrix_init_user() +# +#This script will save a copy of the specified keymap as keymap.c.bak +#and then create a new keymap.c with the definion corrected. +#this script must be run from the ergodox_ez directory +if [ $# -ne 1 ]; then + echo $0: usage: ./190hotfix keymap_name + exit 1 +fi + +echo Saving backup as ./keymaps/$1/keymap.c.bak ... +mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak + +echo Modifying ./keymaps/$1/keymap.c ... +cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c + +echo Complete! diff --git a/keyboard/ergodox_ez/ergodox_ez.c b/keyboard/ergodox_ez/ergodox_ez.c index d0eaf3392..97e6de1ee 100644 --- a/keyboard/ergodox_ez/ergodox_ez.c +++ b/keyboard/ergodox_ez/ergodox_ez.c @@ -5,16 +5,16 @@ bool i2c_initialized = 0; uint8_t mcp23018_status = 0x20; __attribute__ ((weak)) -void * matrix_init_user(void) { - return NULL; -}; +void matrix_init_user(void) { + +} __attribute__ ((weak)) -void * matrix_scan_user(void) { - return NULL; -}; +void matrix_scan_user(void) { -void * matrix_init_kb(void) { +} + +void matrix_init_kb(void) { // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") TCCR1A = 0b10101001; // set and configure fast PWM TCCR1B = 0b00001001; // set and configure fast PWM @@ -34,21 +34,12 @@ void * matrix_init_kb(void) { ergodox_blink_all_leds(); - if (matrix_init_user) { - (*matrix_init_user)(); - } + matrix_init_user(); +} - return NULL; -}; - -void * matrix_scan_kb(void) { - - if (matrix_scan_user) { - (*matrix_scan_user)(); - } - - return NULL; -}; +void matrix_scan_kb(void) { + matrix_scan_user(); +} void ergodox_blink_all_leds(void) diff --git a/keyboard/ergodox_ez/ergodox_ez.h b/keyboard/ergodox_ez/ergodox_ez.h index aceb7ed9c..1e446baf6 100644 --- a/keyboard/ergodox_ez/ergodox_ez.h +++ b/keyboard/ergodox_ez/ergodox_ez.h @@ -123,8 +123,8 @@ inline void ergodox_led_all_set(uint8_t n) { k0D, k1D, k2D, k3D, k4D, KC_NO } \ } -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); diff --git a/keyboard/ergodox_ez/keymaps/andrew_osx/andrew_osx.hex b/keyboard/ergodox_ez/keymaps/andrew_osx/andrew_osx.hex index e3ee9afd3..fc0876d84 100644 Binary files a/keyboard/ergodox_ez/keymaps/andrew_osx/andrew_osx.hex and b/keyboard/ergodox_ez/keymaps/andrew_osx/andrew_osx.hex differ diff --git a/keyboard/ergodox_ez/keymaps/andrew_osx/keymap.c b/keyboard/ergodox_ez/keymaps/andrew_osx/keymap.c index 48f8c5d2f..48257d23a 100644 --- a/keyboard/ergodox_ez/keymaps/andrew_osx/keymap.c +++ b/keyboard/ergodox_ez/keymaps/andrew_osx/keymap.c @@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/coderkun_neo2/coderkun_neo2.hex b/keyboard/ergodox_ez/keymaps/coderkun_neo2/coderkun_neo2.hex index 2c7f3ec54..f14a11fb5 100644 Binary files a/keyboard/ergodox_ez/keymaps/coderkun_neo2/coderkun_neo2.hex and b/keyboard/ergodox_ez/keymaps/coderkun_neo2/coderkun_neo2.hex differ diff --git a/keyboard/ergodox_ez/keymaps/coderkun_neo2/keymap.c b/keyboard/ergodox_ez/keymaps/coderkun_neo2/keymap.c index be29a1bff..25ab0ff18 100644 --- a/keyboard/ergodox_ez/keymaps/coderkun_neo2/keymap.c +++ b/keyboard/ergodox_ez/keymaps/coderkun_neo2/keymap.c @@ -243,12 +243,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/colemak/colemak.hex b/keyboard/ergodox_ez/keymaps/colemak/colemak.hex index cd3bf781a..0f5bba3b5 100644 Binary files a/keyboard/ergodox_ez/keymaps/colemak/colemak.hex and b/keyboard/ergodox_ez/keymaps/colemak/colemak.hex differ diff --git a/keyboard/ergodox_ez/keymaps/colemak/keymap.c b/keyboard/ergodox_ez/keymaps/colemak/keymap.c index ee72c4263..9601726f7 100644 --- a/keyboard/ergodox_ez/keymaps/colemak/keymap.c +++ b/keyboard/ergodox_ez/keymaps/colemak/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/colemak_osx_pc_no/colemak_osx_pc_no.hex b/keyboard/ergodox_ez/keymaps/colemak_osx_pc_no/colemak_osx_pc_no.hex index ecf97c9f1..1d87acd14 100644 Binary files a/keyboard/ergodox_ez/keymaps/colemak_osx_pc_no/colemak_osx_pc_no.hex and b/keyboard/ergodox_ez/keymaps/colemak_osx_pc_no/colemak_osx_pc_no.hex differ diff --git a/keyboard/ergodox_ez/keymaps/csharp_dev/csharp_dev.hex b/keyboard/ergodox_ez/keymaps/csharp_dev/csharp_dev.hex index 01fcd0833..12efef223 100644 Binary files a/keyboard/ergodox_ez/keymaps/csharp_dev/csharp_dev.hex and b/keyboard/ergodox_ez/keymaps/csharp_dev/csharp_dev.hex differ diff --git a/keyboard/ergodox_ez/keymaps/csharp_dev/keymap.c b/keyboard/ergodox_ez/keymaps/csharp_dev/keymap.c index 5f16107ce..46005b533 100644 --- a/keyboard/ergodox_ez/keymaps/csharp_dev/keymap.c +++ b/keyboard/ergodox_ez/keymaps/csharp_dev/keymap.c @@ -210,12 +210,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/dave/dave.hex b/keyboard/ergodox_ez/keymaps/dave/dave.hex index 767a9ca11..363e7234d 100644 Binary files a/keyboard/ergodox_ez/keymaps/dave/dave.hex and b/keyboard/ergodox_ez/keymaps/dave/dave.hex differ diff --git a/keyboard/ergodox_ez/keymaps/dave/keymap.c b/keyboard/ergodox_ez/keymaps/dave/keymap.c index a0c74ad80..3ac2842fb 100644 --- a/keyboard/ergodox_ez/keymaps/dave/keymap.c +++ b/keyboard/ergodox_ez/keymaps/dave/keymap.c @@ -154,12 +154,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { - return NULL; +void matrix_init_user(void) { + }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { /* leds is a static array holding the current brightness of each of the * three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and * -1s in the code below, and because wasting a byte really doesn't matter @@ -191,5 +191,5 @@ void * matrix_scan_user(void) { } } - return NULL; + }; diff --git a/keyboard/ergodox_ez/keymaps/default/default.hex b/keyboard/ergodox_ez/keymaps/default/default.hex index 14f5b7c79..bd5cd4341 100644 Binary files a/keyboard/ergodox_ez/keymaps/default/default.hex and b/keyboard/ergodox_ez/keymaps/default/default.hex differ diff --git a/keyboard/ergodox_ez/keymaps/default/keymap.c b/keyboard/ergodox_ez/keymaps/default/keymap.c index f252bf71d..1c3bb5171 100644 --- a/keyboard/ergodox_ez/keymaps/default/keymap.c +++ b/keyboard/ergodox_ez/keymaps/default/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/default_osx/default_osx.hex b/keyboard/ergodox_ez/keymaps/default_osx/default_osx.hex index 3a1cc4f79..02ee97554 100644 Binary files a/keyboard/ergodox_ez/keymaps/default_osx/default_osx.hex and b/keyboard/ergodox_ez/keymaps/default_osx/default_osx.hex differ diff --git a/keyboard/ergodox_ez/keymaps/default_osx/keymap.c b/keyboard/ergodox_ez/keymaps/default_osx/keymap.c index 9d7364d37..81b49ceff 100644 --- a/keyboard/ergodox_ez/keymaps/default_osx/keymap.c +++ b/keyboard/ergodox_ez/keymaps/default_osx/keymap.c @@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/dragon788/dragon788.hex b/keyboard/ergodox_ez/keymaps/dragon788/dragon788.hex index 36adaad1d..1ca511fe1 100644 Binary files a/keyboard/ergodox_ez/keymaps/dragon788/dragon788.hex and b/keyboard/ergodox_ez/keymaps/dragon788/dragon788.hex differ diff --git a/keyboard/ergodox_ez/keymaps/dragon788/keymap.c b/keyboard/ergodox_ez/keymaps/dragon788/keymap.c index d18ce73bf..3aec8c6cf 100644 --- a/keyboard/ergodox_ez/keymaps/dragon788/keymap.c +++ b/keyboard/ergodox_ez/keymaps/dragon788/keymap.c @@ -200,12 +200,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/dvorak/dvorak.hex b/keyboard/ergodox_ez/keymaps/dvorak/dvorak.hex index 8e1ac3f21..2568c571e 100644 Binary files a/keyboard/ergodox_ez/keymaps/dvorak/dvorak.hex and b/keyboard/ergodox_ez/keymaps/dvorak/dvorak.hex differ diff --git a/keyboard/ergodox_ez/keymaps/dvorak/keymap.c b/keyboard/ergodox_ez/keymaps/dvorak/keymap.c index 53934ea34..22947327d 100644 --- a/keyboard/ergodox_ez/keymaps/dvorak/keymap.c +++ b/keyboard/ergodox_ez/keymaps/dvorak/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/emacs_osx_dk/emacs_osx_dk.hex b/keyboard/ergodox_ez/keymaps/emacs_osx_dk/emacs_osx_dk.hex index 542a4662b..f05b3cc19 100644 Binary files a/keyboard/ergodox_ez/keymaps/emacs_osx_dk/emacs_osx_dk.hex and b/keyboard/ergodox_ez/keymaps/emacs_osx_dk/emacs_osx_dk.hex differ diff --git a/keyboard/ergodox_ez/keymaps/emacs_osx_dk/keymap.c b/keyboard/ergodox_ez/keymaps/emacs_osx_dk/keymap.c index bdac229e5..1d8e66a08 100644 --- a/keyboard/ergodox_ez/keymaps/emacs_osx_dk/keymap.c +++ b/keyboard/ergodox_ez/keymaps/emacs_osx_dk/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/erez_experimental/erez_experimental.hex b/keyboard/ergodox_ez/keymaps/erez_experimental/erez_experimental.hex index 928c0ecc3..aa0884565 100644 Binary files a/keyboard/ergodox_ez/keymaps/erez_experimental/erez_experimental.hex and b/keyboard/ergodox_ez/keymaps/erez_experimental/erez_experimental.hex differ diff --git a/keyboard/ergodox_ez/keymaps/erez_experimental/keymap.c b/keyboard/ergodox_ez/keymaps/erez_experimental/keymap.c index 20c95f1ee..24ff1c688 100644 --- a/keyboard/ergodox_ez/keymaps/erez_experimental/keymap.c +++ b/keyboard/ergodox_ez/keymaps/erez_experimental/keymap.c @@ -156,12 +156,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/german-kinergo/german-kinergo.hex b/keyboard/ergodox_ez/keymaps/german-kinergo/german-kinergo.hex index 574e81066..03df47596 100644 Binary files a/keyboard/ergodox_ez/keymaps/german-kinergo/german-kinergo.hex and b/keyboard/ergodox_ez/keymaps/german-kinergo/german-kinergo.hex differ diff --git a/keyboard/ergodox_ez/keymaps/german-kinergo/keymap.c b/keyboard/ergodox_ez/keymaps/german-kinergo/keymap.c index 751049ac5..572e03a1d 100644 --- a/keyboard/ergodox_ez/keymaps/german-kinergo/keymap.c +++ b/keyboard/ergodox_ez/keymaps/german-kinergo/keymap.c @@ -182,12 +182,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/german/german.hex b/keyboard/ergodox_ez/keymaps/german/german.hex index a2f30d7cb..ce54b5476 100644 Binary files a/keyboard/ergodox_ez/keymaps/german/german.hex and b/keyboard/ergodox_ez/keymaps/german/german.hex differ diff --git a/keyboard/ergodox_ez/keymaps/german/keymap.c b/keyboard/ergodox_ez/keymaps/german/keymap.c index d91f1e937..7ec8d99cc 100644 --- a/keyboard/ergodox_ez/keymaps/german/keymap.c +++ b/keyboard/ergodox_ez/keymaps/german/keymap.c @@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/j3rn/j3rn.hex b/keyboard/ergodox_ez/keymaps/j3rn/j3rn.hex index 61af86e72..40fcc2ba0 100644 Binary files a/keyboard/ergodox_ez/keymaps/j3rn/j3rn.hex and b/keyboard/ergodox_ez/keymaps/j3rn/j3rn.hex differ diff --git a/keyboard/ergodox_ez/keymaps/j3rn/keymap.c b/keyboard/ergodox_ez/keymaps/j3rn/keymap.c index ddc64e55e..b5463cb72 100644 --- a/keyboard/ergodox_ez/keymaps/j3rn/keymap.c +++ b/keyboard/ergodox_ez/keymaps/j3rn/keymap.c @@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/jack/jack.hex b/keyboard/ergodox_ez/keymaps/jack/jack.hex index 5651572ab..cfccb8726 100644 Binary files a/keyboard/ergodox_ez/keymaps/jack/jack.hex and b/keyboard/ergodox_ez/keymaps/jack/jack.hex differ diff --git a/keyboard/ergodox_ez/keymaps/jack/keymap.c b/keyboard/ergodox_ez/keymaps/jack/keymap.c index f8f73a1af..80bf9d535 100644 --- a/keyboard/ergodox_ez/keymaps/jack/keymap.c +++ b/keyboard/ergodox_ez/keymaps/jack/keymap.c @@ -89,12 +89,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/jacobono/jacobono.hex b/keyboard/ergodox_ez/keymaps/jacobono/jacobono.hex index cf68f854f..f780f648f 100644 Binary files a/keyboard/ergodox_ez/keymaps/jacobono/jacobono.hex and b/keyboard/ergodox_ez/keymaps/jacobono/jacobono.hex differ diff --git a/keyboard/ergodox_ez/keymaps/jacobono/keymap.c b/keyboard/ergodox_ez/keymaps/jacobono/keymap.c index ed8dfc731..6b19800af 100644 --- a/keyboard/ergodox_ez/keymaps/jacobono/keymap.c +++ b/keyboard/ergodox_ez/keymaps/jacobono/keymap.c @@ -244,12 +244,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/jgarr/jgarr.hex b/keyboard/ergodox_ez/keymaps/jgarr/jgarr.hex index f87413b56..38be3e468 100644 Binary files a/keyboard/ergodox_ez/keymaps/jgarr/jgarr.hex and b/keyboard/ergodox_ez/keymaps/jgarr/jgarr.hex differ diff --git a/keyboard/ergodox_ez/keymaps/jgarr/keymap.c b/keyboard/ergodox_ez/keymaps/jgarr/keymap.c index fbdc25109..a3ad2040f 100644 --- a/keyboard/ergodox_ez/keymaps/jgarr/keymap.c +++ b/keyboard/ergodox_ez/keymaps/jgarr/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/kastyle/kastyle.hex b/keyboard/ergodox_ez/keymaps/kastyle/kastyle.hex index 8c5409ac6..684e65404 100644 Binary files a/keyboard/ergodox_ez/keymaps/kastyle/kastyle.hex and b/keyboard/ergodox_ez/keymaps/kastyle/kastyle.hex differ diff --git a/keyboard/ergodox_ez/keymaps/kastyle/keymap.c b/keyboard/ergodox_ez/keymaps/kastyle/keymap.c index ecf1be872..3982e0a19 100644 --- a/keyboard/ergodox_ez/keymaps/kastyle/keymap.c +++ b/keyboard/ergodox_ez/keymaps/kastyle/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/kines-ish/keymap.c b/keyboard/ergodox_ez/keymaps/kines-ish/keymap.c index 20cb53241..5063c99f2 100644 --- a/keyboard/ergodox_ez/keymaps/kines-ish/keymap.c +++ b/keyboard/ergodox_ez/keymaps/kines-ish/keymap.c @@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/kines-ish/kines-ish.hex b/keyboard/ergodox_ez/keymaps/kines-ish/kines-ish.hex index eea5130bd..c04a78512 100644 Binary files a/keyboard/ergodox_ez/keymaps/kines-ish/kines-ish.hex and b/keyboard/ergodox_ez/keymaps/kines-ish/kines-ish.hex differ diff --git a/keyboard/ergodox_ez/keymaps/mpiechotka/keymap.c b/keyboard/ergodox_ez/keymaps/mpiechotka/keymap.c index 9f90c639a..0c4f85a3d 100644 --- a/keyboard/ergodox_ez/keymaps/mpiechotka/keymap.c +++ b/keyboard/ergodox_ez/keymaps/mpiechotka/keymap.c @@ -248,12 +248,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { - return NULL; +void matrix_init_user(void) { + }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/mpiechotka/mpiechotka.hex b/keyboard/ergodox_ez/keymaps/mpiechotka/mpiechotka.hex index e2f2b6caa..287cfcd6e 100644 Binary files a/keyboard/ergodox_ez/keymaps/mpiechotka/mpiechotka.hex and b/keyboard/ergodox_ez/keymaps/mpiechotka/mpiechotka.hex differ diff --git a/keyboard/ergodox_ez/keymaps/ordinary/keymap.c b/keyboard/ergodox_ez/keymaps/ordinary/keymap.c index d44962b0d..3343c2296 100644 --- a/keyboard/ergodox_ez/keymaps/ordinary/keymap.c +++ b/keyboard/ergodox_ez/keymaps/ordinary/keymap.c @@ -161,12 +161,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/ordinary/ordinary.hex b/keyboard/ergodox_ez/keymaps/ordinary/ordinary.hex index c7782d1c2..5a847aa6e 100644 Binary files a/keyboard/ergodox_ez/keymaps/ordinary/ordinary.hex and b/keyboard/ergodox_ez/keymaps/ordinary/ordinary.hex differ diff --git a/keyboard/ergodox_ez/keymaps/osx_de/keymap.c b/keyboard/ergodox_ez/keymaps/osx_de/keymap.c index 7ecd1ae70..7dbe05b28 100644 --- a/keyboard/ergodox_ez/keymaps/osx_de/keymap.c +++ b/keyboard/ergodox_ez/keymaps/osx_de/keymap.c @@ -390,12 +390,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/osx_de/osx_de.hex b/keyboard/ergodox_ez/keymaps/osx_de/osx_de.hex index bf12476a4..7f3ed1af5 100644 Binary files a/keyboard/ergodox_ez/keymaps/osx_de/osx_de.hex and b/keyboard/ergodox_ez/keymaps/osx_de/osx_de.hex differ diff --git a/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/keymap.c b/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/keymap.c index fb8635118..70ac8f01f 100644 --- a/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/keymap.c +++ b/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/keymap.c @@ -227,12 +227,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/osx_de_adnw_koy.hex b/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/osx_de_adnw_koy.hex index 403076335..56448283d 100644 Binary files a/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/osx_de_adnw_koy.hex and b/keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/osx_de_adnw_koy.hex differ diff --git a/keyboard/ergodox_ez/keymaps/osx_fr/keymap.c b/keyboard/ergodox_ez/keymaps/osx_fr/keymap.c index 4b59d2eb2..f1806ffff 100644 --- a/keyboard/ergodox_ez/keymaps/osx_fr/keymap.c +++ b/keyboard/ergodox_ez/keymaps/osx_fr/keymap.c @@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/osx_fr/osx_fr.hex b/keyboard/ergodox_ez/keymaps/osx_fr/osx_fr.hex index 8915d9caa..abe089a9f 100644 Binary files a/keyboard/ergodox_ez/keymaps/osx_fr/osx_fr.hex and b/keyboard/ergodox_ez/keymaps/osx_fr/osx_fr.hex differ diff --git a/keyboard/ergodox_ez/keymaps/osx_kinesis_pnut/keymap.c b/keyboard/ergodox_ez/keymaps/osx_kinesis_pnut/keymap.c index f71ca28ce..1032be549 100644 --- a/keyboard/ergodox_ez/keymaps/osx_kinesis_pnut/keymap.c +++ b/keyboard/ergodox_ez/keymaps/osx_kinesis_pnut/keymap.c @@ -162,12 +162,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/plover/keymap.c b/keyboard/ergodox_ez/keymaps/plover/keymap.c index bd356c47c..a991e6082 100644 --- a/keyboard/ergodox_ez/keymaps/plover/keymap.c +++ b/keyboard/ergodox_ez/keymaps/plover/keymap.c @@ -199,12 +199,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/plover/plover.hex b/keyboard/ergodox_ez/keymaps/plover/plover.hex index 53b0747d7..d63cbb8fa 100644 Binary files a/keyboard/ergodox_ez/keymaps/plover/plover.hex and b/keyboard/ergodox_ez/keymaps/plover/plover.hex differ diff --git a/keyboard/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx/keymap.c b/keyboard/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx/keymap.c index 173fc4ecd..9971b834c 100644 --- a/keyboard/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx/keymap.c +++ b/keyboard/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx/keymap.c @@ -108,11 +108,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); ergodox_board_led_off(); ergodox_right_led_1_off(); diff --git a/keyboard/ergodox_ez/keymaps/software_neo2/keymap.c b/keyboard/ergodox_ez/keymaps/software_neo2/keymap.c index 684ecf5e3..a734062f1 100644 --- a/keyboard/ergodox_ez/keymaps/software_neo2/keymap.c +++ b/keyboard/ergodox_ez/keymaps/software_neo2/keymap.c @@ -114,12 +114,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { +void matrix_init_user(void) { }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboard/ergodox_ez/keymaps/software_neo2/software_neo2.hex b/keyboard/ergodox_ez/keymaps/software_neo2/software_neo2.hex index 8cf730c8f..5ad6b23a7 100644 Binary files a/keyboard/ergodox_ez/keymaps/software_neo2/software_neo2.hex and b/keyboard/ergodox_ez/keymaps/software_neo2/software_neo2.hex differ diff --git a/keyboard/ergodox_ez/keymaps/tm2030/keymap.c b/keyboard/ergodox_ez/keymaps/tm2030/keymap.c index 92efd9b5e..ca8075226 100644 --- a/keyboard/ergodox_ez/keymaps/tm2030/keymap.c +++ b/keyboard/ergodox_ez/keymaps/tm2030/keymap.c @@ -215,12 +215,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; // Runs just one time when the keyboard initializes. -void * matrix_init_user(void) { - return NULL; +void matrix_init_user(void) { + }; // Runs constantly in the background, in a loop. -void * matrix_scan_user(void) { +void matrix_scan_user(void) { ergodox_board_led_off(); ergodox_right_led_1_off(); @@ -238,5 +238,5 @@ void * matrix_scan_user(void) { if (host_keyboard_leds() & (1< -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); #endif diff --git a/keyboard/planck/keymaps/default/keymap.c b/keyboard/planck/keymaps/default/keymap.c index a9c2a0681..d995eb9e5 100644 --- a/keyboard/planck/keymaps/default/keymap.c +++ b/keyboard/planck/keymaps/default/keymap.c @@ -17,31 +17,91 @@ #define _RS 4 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_QW] = { /* Qwerty */ + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QW] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_CM] = { /* Colemak */ + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_CM] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_DV] = { /* Dvorak */ + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DV] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_RS] = { /* RAISE */ + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RS] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, -[_LW] = { /* LOWER */ + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LW] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, diff --git a/keyboard/planck/keymaps/lock/keymap.c b/keyboard/planck/keymaps/lock/keymap.c index 958576462..f1629492e 100644 --- a/keyboard/planck/keymaps/lock/keymap.c +++ b/keyboard/planck/keymaps/lock/keymap.c @@ -150,7 +150,7 @@ float start_up[][2] = { {440.0*pow(2.0,(64)/12.0), 1000}, }; -void * matrix_init_user(void) { +void matrix_init_user(void) { init_notes(); play_notes(&start_up, 9, false); } \ No newline at end of file diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c index 63ca54761..fe8731ec7 100644 --- a/keyboard/planck/planck.c +++ b/keyboard/planck/planck.c @@ -1,16 +1,16 @@ #include "planck.h" __attribute__ ((weak)) -void * matrix_init_user(void) { +void matrix_init_user(void) { -}; +} __attribute__ ((weak)) -void * matrix_scan_user(void) { +void matrix_scan_user(void) { -}; +} -void * matrix_init_kb(void) { +void matrix_init_kb(void) { #ifdef BACKLIGHT_ENABLE backlight_init_ports(); #endif @@ -24,13 +24,9 @@ void * matrix_init_kb(void) { DDRE |= (1<<6); PORTE |= (1<<6); - if (matrix_init_user) { - (*matrix_init_user)(); - } -}; + matrix_init_user(); +} -void * matrix_scan_kb(void) { - if (matrix_scan_user) { - (*matrix_scan_user)(); - } -}; +void matrix_scan_kb(void) { + matrix_scan_user(); +} diff --git a/keyboard/planck/planck.h b/keyboard/planck/planck.h index 00b01b54d..e9566b922 100644 --- a/keyboard/planck/planck.h +++ b/keyboard/planck/planck.h @@ -40,7 +40,7 @@ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ } -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); #endif diff --git a/keyboard/retro_refit/Makefile b/keyboard/retro_refit/Makefile new file mode 100644 index 000000000..ec51227ff --- /dev/null +++ b/keyboard/retro_refit/Makefile @@ -0,0 +1,139 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = retro_refit + + +# Directory common source filess exist +TOP_DIR = ../.. +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# # project specific files +SRC = retro_refit.c + +ifdef KEYMAP + SRC := keymaps/$(KEYMAP).c $(SRC) +else + SRC := keymaps/default.c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) +VPATH += $(TMK_DIR) + +include $(TOP_DIR)/quantum/quantum.mk + diff --git a/keyboard/retro_refit/README.md b/keyboard/retro_refit/README.md new file mode 100644 index 000000000..d3c9d4197 --- /dev/null +++ b/keyboard/retro_refit/README.md @@ -0,0 +1,24 @@ +retro_refit keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent README.md](/README.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboard/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top README.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|] +``` +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboard/retro_refit/config.h b/keyboard/retro_refit/config.h new file mode 100644 index 000000000..ba9a861ed --- /dev/null +++ b/keyboard/retro_refit/config.h @@ -0,0 +1,79 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nobody +#define PRODUCT retro_refit +#define DESCRIPTION Retro Refit + +/* key matrix size */ +#define MATRIX_ROWS 11 +#define MATRIX_COLS 8 + +// See note in retro_refit.h for an explanation of how this matrix is wired up +#define COLS (int []){ B0, B1, B2, B3, D2, D3, C7, D5 } +#define ROWS (int []){ D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/retro_refit/keymaps/default.c b/keyboard/retro_refit/keymaps/default.c new file mode 100644 index 000000000..405402d5e --- /dev/null +++ b/keyboard/retro_refit/keymaps/default.c @@ -0,0 +1,33 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "retro_refit.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = + KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, NLCK, SLCK, PSCR, PAUS, \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, HOME, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, PGUP, \ + BSLS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, PGDN, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, END, \ + LCTL, LGUI, LALT, SPC, INS, DEL, LEFT, DOWN, RGHT), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboard/retro_refit/retro_refit.c b/keyboard/retro_refit/retro_refit.c new file mode 100644 index 000000000..0b13eb830 --- /dev/null +++ b/keyboard/retro_refit/retro_refit.c @@ -0,0 +1,68 @@ +#include "retro_refit.h" + +__attribute__ ((weak)) +void matrix_init_user(void) { + // leave this function blank - it can be defined in a keymap file +}; + +__attribute__ ((weak)) +void matrix_scan_user(void) { + // leave this function blank - it can be defined in a keymap file +}; + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + // leave this function blank - it can be defined in a keymap file +}; + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + // Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS) + DDRD |= (1<<6); + PORTD |= (1<<6); + + matrix_init_user(); +}; + +void amatrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +}; + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1< + +// This macro is an example of using a non-standard row-column matrix. The +// keyboard in question had 11 rows and 8 columns, but the rows were not all +// horizontal, and the columns were not all vertical. For example, row 2 +// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and +// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", +// "Left Alt", "Up Arrow", and "Down Arrow". +// +// The macro makes programming the keys easier and in a more straight-forward +// manner because it realigns the keys into a 6x15 sensible keyboard layout +// instead of the obtuse 11x8 matrix. + +#define KEYMAP( \ + K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \ + K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \ + K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \ + K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \ + K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \ + K10, K06, K25, K07, K86, K85, K95, K90, K93 \ +) { \ +{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \ +{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \ +{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \ +{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \ +{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \ +{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \ +{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \ +{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \ +{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \ +{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \ +{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); +void led_set_user(uint8_t usb_led); + +#endif \ No newline at end of file diff --git a/quantum/led.c b/quantum/led.c index 2c0574660..9cdb8a5c2 100644 --- a/quantum/led.c +++ b/quantum/led.c @@ -19,9 +19,16 @@ along with this program. If not, see . #include "stdint.h" #include "led.h" +__attribute__ ((weak)) +void led_set_kb(uint8_t usb_led) { + +} void led_set(uint8_t usb_led) { + + // Example LED Code + // // // Using PE6 Caps Lock LED // if (usb_led & (1<