diff --git a/keyboards/planck/keymaps/espynn/Makefile b/keyboards/planck/keymaps/espynn/Makefile
new file mode 100644
index 000000000..44a030ba3
--- /dev/null
+++ b/keyboards/planck/keymaps/espynn/Makefile
@@ -0,0 +1,63 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+# change to "no" to disable the options, or define them in the makefile.mk in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/planck/keymaps/espynn/keyboard-layout.jpg b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg
new file mode 100644
index 000000000..55e5396bf
Binary files /dev/null and b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg differ
diff --git a/keyboards/planck/keymaps/espynn/keymap.c b/keyboards/planck/keymaps/espynn/keymap.c
new file mode 100644
index 000000000..4a3fe32b8
--- /dev/null
+++ b/keyboards/planck/keymaps/espynn/keymap.c
@@ -0,0 +1,151 @@
+#include "planck.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef BACKLIGHT_ENABLE
+ #include "backlight.h"
+#endif
+#define PREVENT_STUCK_MODIFIERS
+extern keymap_config_t keymap_config;
+
+// Symbolic names for macro IDs.
+#define _QWERTY 0 // QUERTY layer
+#define _LOWER 1 // Lower layer
+#define _RAISE 2 // Raise layer
+#define _CUSTOM 3 // Custom layer (LOWER + RAISE)
+#define _BL 4 // Backlight
+#define _CUS0 5 // Mobile#
+#define _CUS1 6 // signature
+#define _CUS2 7 // macro 2
+#define _CUS3 8 // macro 3
+#define _CUS4 9 // macro 4
+#define _CUS5 10 // email
+#define _COPY 11 // copy
+#define _PASTE 12 // paste
+#define _CUT 13 // cut
+
+// Macro shortcuts.
+#define QWERTY M(_LOWER)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+#define CUSTOM M(_CUSTOM)
+#define BL M(_BL)
+#define CUS0 M(_CUS0)
+#define CUS1 M(_CUS1)
+#define CUS2 M(_CUS2)
+#define CUS3 M(_CUS3)
+#define CUS4 M(_CUS4)
+#define CUS5 M(_CUS5)
+#define COPY M(_COPY)
+#define PASTE M(_PASTE)
+#define CUT M(_CUT)
+
+// Func macro definitions.
+#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER
+#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE
+#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK)
+#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift
+#define ZM_NRM FUNC(4) // Zoom normal
+#define ZM_IN FUNC(5) // Zoom out
+#define ZM_OUT FUNC(6) // Zoom in
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN),
+ [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP),
+ [2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS),
+ [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+ [4] = ACTION_MODS_KEY(MOD_LCTL, KC_0),
+ [5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),
+ [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS),
+ [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
+ };
+
+// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QWERTY] = { /* QWERTY */
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_DEL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT},
+ {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[_LOWER] = { /* LOWER */
+ {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+[_RAISE] = { /* RAISE */
+ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[_CUSTOM] = { /* CUSTOM */
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+}
+};
+
+// Set a layer persistantly.
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+// Macro actions for each corresponding ID.
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch(id) {
+ case _RAISE: // Raised layer.
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+ }
+ break;
+ case _LOWER: // Lowered layer.
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+ }
+ break;
+ case _BL: // Backlight
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+#ifdef BACKLIGHT_ENABLE
+ backlight_step();
+#endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ case _CUS0: // enter your mobile# here
+ return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END);
+ case _CUS1: // signature line for email
+ return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END);
+ case _CUS2: // Custom macro 2
+ return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END );
+ case _CUS3: // custom macro 3
+ return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END );
+ case _CUS4: // custom macro 4
+ return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END );
+ case _CUS5: // Enter your email here
+ return MACRODOWN( TYPE(KC_F),
+ DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT),
+ TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END );
+ case _CUT: //cut macro
+ return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END );
+ case _COPY: // copy macro
+ return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END );
+ case _PASTE: // paste macro
+ return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END );
+ };
+ return MACRO_NONE;
+}
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/espynn/layout.json b/keyboards/planck/keymaps/espynn/layout.json
new file mode 100644
index 000000000..38ccc3452
--- /dev/null
+++ b/keyboards/planck/keymaps/espynn/layout.json
@@ -0,0 +1,271 @@
+[
+ {
+ "backcolor": "#858585",
+ "name": "Planck 40%",
+ "author": "James Folkert",
+ "background": {
+ "name": "Aluminium brushed",
+ "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
+ },
+ "switchMount": "cherry",
+ "switchBrand": "cherry",
+ "switchType": "MX1A-A1xx",
+ "pcb": true,
+ "plate": true
+ },
+ [
+ {
+ "fa": [
+ 2,
+ 2,
+ 0,
+ 2
+ ]
+ },
+ "F1\n1\n\n!\n\n\n\n\n\n",
+ "F2\n2\n\n@\n\n\n\n\n\nQ",
+ "F3\n3\n\n#\n\n\n\n\n\nW",
+ "F4\n4\n\n$\n\n\n\n\n\nE",
+ "F5\n5\n\n%\n\n\n\n\n\nR",
+ "F6\n6\n\n^\n\n\n\n\n\nT",
+ "F7\n6\n\n&\n\n\n\n\n\nY",
+ "F8\n8\n\n*\nMacro4\n\n\n\n\nU",
+ "F9\n9\n\n(\n\n\n\n\n\nI",
+ {
+ "fa": [
+ 0,
+ 0,
+ 0,
+ 2
+ ]
+ },
+ "F10\n0\n\n)\n\n\n\n\n\nO",
+ {
+ "fa": [
+ 2,
+ 2,
+ 0,
+ 2
+ ]
+ },
+ "F11\n-\n\n_\n\n\n\n\n\nP",
+ "F12\n=\n\n+\n\n\n\n\n\n"
+ ],
+ [
+ {
+ "a": 7,
+ "f": 3
+ },
+ "",
+ {
+ "f": 3
+ },
+ "A",
+ {
+ "f": 3
+ },
+ "S",
+ {
+ "f": 3
+ },
+ "D",
+ {
+ "t": "#ff0000",
+ "a": 4,
+ "f": 3
+ },
+ "\n(\n\n\n\n\n\n\n\nF",
+ {
+ "t": "#000000",
+ "f": 3
+ },
+ "\n)\n\n\n\n\n\n\n\nG",
+ {
+ "f": 3
+ },
+ "\n{\n\n\nMacro0\n\n\n\n\nH",
+ {
+ "t": "#ff0000",
+ "f": 3
+ },
+ "\n}\n\n\nMacro3\n\n\n\n\nJ",
+ {
+ "t": "#000000",
+ "f": 3
+ },
+ "{\n\n\n\n\n\n\n\n\nK",
+ {
+ "f": 3
+ },
+ "{\n\n\n\n\n\n\n\n\nL",
+ {
+ "fa": [
+ 2,
+ 2,
+ 2,
+ 2,
+ 0,
+ 0,
+ 0,
+ 2
+ ]
+ },
+ "\\\n\n|\n\n\n\n\n:\n\n;",
+ {
+ "a": 7,
+ "fa": [
+ 9
+ ]
+ },
+ ""
+ ],
+ [
+ {
+ "f": 3
+ },
+ "Shift",
+ {
+ "f": 3
+ },
+ "Z",
+ {
+ "f": 3
+ },
+ "X\n\n\n\nCut",
+ {
+ "f": 3
+ },
+ "C\n\n\n\nCopy",
+ {
+ "a": 4,
+ "fa": [
+ 2,
+ 2,
+ 2,
+ 2
+ ]
+ },
+ "\\\n[\n|\n{\nPaste\n\n\n\n\nV",
+ "|\n]\n\n}\nMacro1\n\n\n\n\nB",
+ "`\n'\n~\n\"\nMacro5\n\n\n\n\nN",
+ "~\n\"\n\n\nMacro2\n\n\n\n\nM",
+ {
+ "fa": [
+ 2,
+ 2,
+ 2,
+ 2,
+ 0,
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "[\n\n{\n\n\n\n\n<\n\n,",
+ "[\n\n{\n\n\n\n\n\n\n.",
+ {
+ "a": 6
+ },
+ "\n\n?\n\n\n\n\n\n/",
+ {
+ "a": 4,
+ "fa": [
+ 2,
+ 2,
+ 2,
+ 0,
+ 0,
+ 0,
+ 0,
+ 1,
+ 9,
+ 0
+ ]
+ },
+ "\n\n\nShift\n\n\n\n\n\n\nShift"
+ ],
+ [
+ {
+ "a": 7,
+ "f": 3
+ },
+ "Ctrl\n\n\n\nBLight",
+ {
+ "a": 4,
+ "fa": [
+ 2,
+ 1,
+ 2,
+ 0,
+ 0,
+ 0,
+ 0,
+ 1,
+ 9,
+ 9
+ ]
+ },
+ "\nZNorm\n\n\nRESET\n\n\n\n\n",
+ {
+ "fa": [
+ 2,
+ 1,
+ 2,
+ 0,
+ 0,
+ 0,
+ 0,
+ 1,
+ 9,
+ 6
+ ]
+ },
+ "\nZIn\n\n\n\n\n\n\n\n",
+ {
+ "fa": [
+ 2,
+ 1,
+ 2,
+ 0,
+ 0,
+ 0,
+ 0,
+ 1,
+ 9,
+ 9
+ ]
+ },
+ "\nZOut\n\n\n\n\n\n\n\n",
+ {
+ "a": 7,
+ "fa": [
+ 9
+ ]
+ },
+ "⇓",
+ {
+ "a": 4,
+ "fa": [
+ 9,
+ 5,
+ 5
+ ],
+ "w": 2
+ },
+ "\n\n",
+ {
+ "a": 7
+ },
+ "⇑",
+ {
+ "a": 4,
+ "fa": [
+ 2
+ ]
+ },
+ "\n\n\n\n\n\n\n\n\n←",
+ "\n\n\n\n\n\n\n\n\n↓",
+ "\n\n\n\n\n\n\n\n\n↑",
+ "\n\n\n\n\n\n\n\n\n→"
+ ]
+]
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/espynn/readme.md b/keyboards/planck/keymaps/espynn/readme.md
new file mode 100644
index 000000000..8882f4601
--- /dev/null
+++ b/keyboards/planck/keymaps/espynn/readme.md
@@ -0,0 +1,18 @@
+# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard
+Created by James Folkert: https://twitter.com/trekloFsemaJ
+Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
+
+
+
+
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/
+* [JSON of raw layout] (layout.json "JSON of raw layout")
+
+# Notes
+* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here
+* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
+* add your mobile and email to the keymap before make
+* RAISE and LOWER also acts as PgUp and PgDn when tapped.
+* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)
+* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
\ No newline at end of file