diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h
new file mode 100644
index 000000000..1c4298bc3
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/config.h
@@ -0,0 +1,244 @@
+/*
+Copyright 2019 Boy_314
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x4A1F
+#define MANUFACTURER    di0ib
+#define PRODUCT         half_n_half
+#define DESCRIPTION     A small split ortholinear custom keyboard with 2 thumb buttons
+
+/* key matrix size */
+#define MATRIX_ROWS 4*2
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/40percentclub/half_n_half/half_n_half.c b/keyboards/40percentclub/half_n_half/half_n_half.c
new file mode 100644
index 000000000..c4e6a4ce0
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/half_n_half.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "half_n_half.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/40percentclub/half_n_half/half_n_half.h b/keyboards/40percentclub/half_n_half/half_n_half.h
new file mode 100644
index 000000000..6cec59929
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/half_n_half.h
@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06,     K50, K51, K52, K53, K54, K55, K56, \
+    K10, K11, K12, K13, K14, K15, K16,     K60, K61, K62, K63, K64, K65, K66, \
+    K20, K21, K22, K23, K24, K25, K26,     K70, K71, K72, K73, K74, K75, K76, \
+                        K34,                         K82 \
+) { \
+    { K00,   K01,   K02,   K03,   K04, K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14, K15,   K16   }, \
+    { K20,   K21,   K22,   K23,   K24, K25,   K26   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K34, KC_NO, KC_NO }, \
+\
+    { K56,   K55,   K54,   K53,   K52, K51,   K50   }, \
+    { K66,   K65,   K64,   K63,   K62, K61,   K60   }, \
+    { K76,   K75,   K74,   K73,   K72, K71,   K70   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K82, KC_NO, KC_NO }  \
+}
diff --git a/keyboards/40percentclub/half_n_half/info.json b/keyboards/40percentclub/half_n_half/info.json
new file mode 100644
index 000000000..e69de29bb
diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/config.h b/keyboards/40percentclub/half_n_half/keymaps/default/config.h
new file mode 100644
index 000000000..c8e433412
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c b/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c
new file mode 100644
index 000000000..2ab9a8c98
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c
@@ -0,0 +1,65 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_GESC, KC_Q, KC_W, KC_E, KC_R,   KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U,   KC_I,    KC_O,   KC_P,    KC_BSPC, \
+    KC_TAB,  KC_A, KC_S, KC_D, KC_F,   KC_G, KC_LALT, KC_RALT, KC_H, KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V,   KC_B, KC_LGUI, KC_APP,  KC_N, KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_ENT,  \
+                               KC_SPC,                               KC_SPC
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/readme.md b/keyboards/40percentclub/half_n_half/keymaps/default/readme.md
new file mode 100644
index 000000000..58a457f1b
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for half_n_half
\ No newline at end of file
diff --git a/keyboards/40percentclub/half_n_half/readme.md b/keyboards/40percentclub/half_n_half/readme.md
new file mode 100644
index 000000000..689b6fe81
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/readme.md
@@ -0,0 +1,14 @@
+# half_n_half
+
+![half_n_half](https://2.bp.blogspot.com/-akouSRzGKQw/WutIH4qV0nI/AAAAAAACRqA/D1Gx3i1UWlccMCd0VS8td0ckWjCixrSuQCLcBGAs/s1600/b.jpg)
+
+A small split ortho board with two thumb keys
+
+Keyboard Maintainer: [Boy_314](https://github.com/boy-314)  
+Hardware Availability: http://www.40percent.club/2018/07/half-n-half.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/half_n_half:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk
new file mode 100644
index 000000000..bd0d8f808
--- /dev/null
+++ b/keyboards/40percentclub/half_n_half/rules.mk
@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/preonic/keymaps/boy314/keymap.c b/keyboards/preonic/keymaps/boy314/keymap.c
index 67292bdb3..04404f69f 100644
--- a/keyboards/preonic/keymaps/boy314/keymap.c
+++ b/keyboards/preonic/keymaps/boy314/keymap.c
@@ -21,7 +21,7 @@
 // define layers
 #define _QWERTY 0
 #define _DVORAK 1
-#define _OSU 2
+#define _ARROWS 2
 #define _LOWER 10
 #define _RAISE 11
 #define _ADJUST 12
@@ -29,12 +29,9 @@
 // macro shortcuts
 #define QWERTY TO(_QWERTY)
 #define DVORAK TO(_DVORAK)
-#define OSU TO(_OSU)
 #define LOWER M(_LOWER)
 #define RAISE M(_RAISE)
-
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
+#define ARROWS TO(_ARROWS)
  
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -48,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl |  Del | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * | Ctrl |  Del | Alt  | GUI  |Lower | Raise|    Space    | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -57,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_ENT,  \
   KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
   KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, \
-  KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+  KC_LCTL, KC_DEL,  KC_LGUI, KC_LALT, LOWER,   RAISE,   KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
 ),
 
 /* Dvorak
@@ -70,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl | Del  | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * | Ctrl | Del  | Alt  | GUI  |Lower | Raise|    Space    | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -79,7 +76,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, \
   KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT,  \
   KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC, \
-  KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+  KC_LCTL, KC_DEL,  KC_LGUI, KC_LALT, LOWER,   RAISE, KC_SPC,  KC_SPC,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+),
+
+/* ARROWS
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+ 
+[_ARROWS] = LAYOUT_preonic_grid( \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______,  \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT,_______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
 ),
 
 /* Lower
@@ -117,13 +136,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = {
-  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
-  {KC_GRV,  _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______,    KC_DEL},
-  {KC_DEL,  _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_PGUP, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
-},
 
 [_RAISE] = LAYOUT_preonic_grid( \
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
@@ -143,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|Dvorak|      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  OSU |      |      |      |             |      |      |      |      |      |
+ * |      |ARROWS|      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -152,7 +164,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,  \
   _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______, \
   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  DVORAK,  _______, _______, _______, _______, \
-  _______, OSU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+  _______, ARROWS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
 )
 
 };
@@ -175,10 +187,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record)
 			}
 			return false;
 			break;
-		case OSU:
+		case ARROWS:
 			if (record->event.pressed)
 			{
-				set_single_persistent_default_layer(_OSU);
+				set_single_persistent_default_layer(_ARROWS);
 			}
 			return false;
 			break;
diff --git a/keyboards/xd75/keymaps/boy_314/keymap.c b/keyboards/xd75/keymaps/boy_314/keymap.c
index 1de733f0f..71c72514a 100644
--- a/keyboards/xd75/keymaps/boy_314/keymap.c
+++ b/keyboards/xd75/keymaps/boy_314/keymap.c
@@ -17,11 +17,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
- * | TAB    | '      | .      | .      | P      | Y      | [      | \      | ]      | F      | G      | C      | R      | L      | /      |
+ * | TAB    | '      | .      | .      | P      | Y      | [      | UP      | ]      | F      | G      | C      | R      | L      | /      |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | CAP LK | A      | O      | E      | U      | I      | HOME   | DEL    | PG UP  | D      | H      | T      | N      | S      | ENTER  |
+ * | CAP LK | A      | O      | E      | U      | I      | LEFT   | DOWN   | RIGHT  | D      | H      | T      | N      | S      | ENTER  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
- * | LSHIFT | ;      | Q      | J      | K      | X      | END    | UP     | PG DN  | M      | W      | W      | V      | Z      | RSHIFT |
+ * | LSHIFT | ;      | Q      | J      | K      | X      | PG DN  | UP     | PG UP  | M      | W      | W      | V      | Z      | RSHIFT |
  * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
  * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | LEFT   | DOWN   | UP     | RIGHT  |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
@@ -29,9 +29,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
  [_DV] = { /* DVORAK */
   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC  },
-  { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_LBRC, KC_BSLS, KC_RBRC, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH  },
-  { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_HOME, KC_DEL,  KC_PGUP, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT   },
-  { KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_END,  KC_UP,   KC_PGDN, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC  },
+  { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_LBRC, KC_UP,   KC_RBRC, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH  },
+  { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_LEFT, KC_DOWN, KC_RGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT   },
+  { KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_PGDN,  KC_UP,  KC_PGUP, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC  },
   { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT },
  },
 
@@ -67,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * |        |        |        |        |        |        | 1      | 2      | 3      |        |        |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | +      | 0      | .      |        |        |        |        |        |        |
+ * |        |        |        |        |        |        | 0      | +      | .      |        |        |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */  
 
@@ -76,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______,    KC_7,    KC_8,    KC_9, _______, _______, _______, _______, _______, _______  },
   { _______, _______, _______, _______, _______, _______,    KC_4,    KC_5,    KC_6, _______, _______, _______, _______, _______, _______  },
   { _______, _______, _______, _______, _______, _______,    KC_1,    KC_2,    KC_3, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______, KC_PLUS,    KC_0,  KC_DOT, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______,    KC_0, KC_PLUS,  KC_DOT, _______, _______, _______, _______, _______, _______  },
  },
 
 /* FUNCTION1
@@ -125,6 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  }
 };
 
+
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function