_/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branch 'upstream/master'

Browse source
This commit is contained in:
cr3473 2015-05-27 08:29:48 -07:00
commit b36d1a87da
133 changed files with 6488 additions and 2158 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
README.md
View file

@ -54,6 +54,17 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
* [KMAC](keyboard/kmac/) - Korean custom keyboard * [KMAC](keyboard/kmac/) - Korean custom keyboard
* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard * [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard
* [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity] * [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity]
* [NerD](keyboard/nerd/) - Korean custom keyboard
* [KittenPaw](keyboard/kitten_paw) - Custom Majestouch controller
* [Lightpad](keyboard/lightpad) - Korean custom keypad
* [ghost_squid](keyboard/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
* [planck](keyboard/planck/) - [Planck] Ortholinear 40% keyboard
* [atomic](keyboard/atomic/) - [Atomic] Ortholinear 60% keyboard
### Extenal projects using tmk_keyboard
* [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
* [mcdox][mcdox_tmk] - [mcdox][mcdox]
[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 [GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930
[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 [GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047
@ -74,7 +85,14 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
[Sun]: http://en.wikipedia.org/wiki/Sun-3 [Sun]: http://en.wikipedia.org/wiki/Sun-3
[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS [IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS
[Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit [Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit
[ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
[cmxt]: http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
[ergodox_org]: http://ergodox.org/
[cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
[mcdox]: https://github.com/DavidMcEwan/mcdox
[mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
[Planck]: http://planckkeyboard.com
[Atomic]: http://atomickeyboard.com
License License
@ -278,4 +296,4 @@ Coding Style
Other Keyboard Firmware Projects Other Keyboard Firmware Projects
------------------ ------------------
See [doc/other_projects.md](doc/other_projects.md). You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md).

27
common/avr/suspend.c
View file

@ -7,6 +7,7 @@
#include "backlight.h" #include "backlight.h"
#include "suspend_avr.h" #include "suspend_avr.h"
#include "suspend.h" #include "suspend.h"
#include "timer.h"
#ifdef PROTOCOL_LUFA #ifdef PROTOCOL_LUFA
#include "lufa.h" #include "lufa.h"
#endif #endif
@ -52,11 +53,13 @@ void suspend_idle(uint8_t time)
* WDTO_4S * WDTO_4S
* WDTO_8S * WDTO_8S
*/ */
void suspend_power_down(uint8_t wdto) static uint8_t wdt_timeout = 0;
static void power_down(uint8_t wdto)
{ {
#ifdef PROTOCOL_LUFA #ifdef PROTOCOL_LUFA
if (USB_DeviceState == DEVICE_STATE_Configured) return; if (USB_DeviceState == DEVICE_STATE_Configured) return;
#endif #endif
wdt_timeout = wdto;
// Watchdog Interrupt Mode // Watchdog Interrupt Mode
wdt_intr_enable(wdto); wdt_intr_enable(wdto);
@ -67,7 +70,6 @@ void suspend_power_down(uint8_t wdto)
// - prescale clock // - prescale clock
// - BOD disable // - BOD disable
// - Power Reduction Register PRR // - Power Reduction Register PRR
set_sleep_mode(SLEEP_MODE_PWR_DOWN); set_sleep_mode(SLEEP_MODE_PWR_DOWN);
sleep_enable(); sleep_enable();
sei(); sei();
@ -78,6 +80,11 @@ void suspend_power_down(uint8_t wdto)
wdt_disable(); wdt_disable();
} }
void suspend_power_down(void)
{
power_down(WDTO_15MS);
}
bool suspend_wakeup_condition(void) bool suspend_wakeup_condition(void)
{ {
matrix_power_up(); matrix_power_up();
@ -103,15 +110,13 @@ void suspend_wakeup_init(void)
/* watchdog timeout */ /* watchdog timeout */
ISR(WDT_vect) ISR(WDT_vect)
{ {
/* wakeup from MCU sleep mode */ // compensate timer for sleep
/* switch (wdt_timeout) {
// blink LED case WDTO_15MS:
static uint8_t led_state = 0; timer_count += 15 + 2; // WDTO_15MS + 2(from observation)
static uint8_t led_count = 0; break;
led_count++; default:
if ((led_count & 0x07) == 0) { ;
led_set((led_state ^= (1<<USB_LED_CAPS_LOCK)));
} }
*/
} }
#endif #endif

12
common/command.c
View file

@ -303,7 +303,7 @@ static bool command_common(uint8_t code)
#endif #endif
" " STR(BOOTLOADER_SIZE) "\n"); " " STR(BOOTLOADER_SIZE) "\n");
print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
" AVR_ARCH: avr" STR(__AVR_ARCH__) "\n"); " AVR_ARCH: avr" STR(__AVR_ARCH__) "\n");
break; break;
@ -542,12 +542,12 @@ static void mousekey_console_help(void)
print("4: select mk_time_to_max\n"); print("4: select mk_time_to_max\n");
print("5: select mk_wheel_max_speed\n"); print("5: select mk_wheel_max_speed\n");
print("6: select mk_wheel_time_to_max\n"); print("6: select mk_wheel_time_to_max\n");
print("p: print prameters\n"); print("p: print parameters\n");
print("d: set default values\n"); print("d: set default values\n");
print("up: increase prameters(+1)\n"); print("up: increase parameters(+1)\n");
print("down: decrease prameters(-1)\n"); print("down: decrease parameters(-1)\n");
print("pgup: increase prameters(+10)\n"); print("pgup: increase parameters(+10)\n");
print("pgdown: decrease prameters(-10)\n"); print("pgdown: decrease parameters(-10)\n");
print("\nspeed = delta * max_speed * (repeat / time_to_max)\n"); print("\nspeed = delta * max_speed * (repeat / time_to_max)\n");
print("where delta: cursor="); pdec(MOUSEKEY_MOVE_DELTA); print("where delta: cursor="); pdec(MOUSEKEY_MOVE_DELTA);
print(", wheel="); pdec(MOUSEKEY_WHEEL_DELTA); print("\n"); print(", wheel="); pdec(MOUSEKEY_WHEEL_DELTA); print("\n");

3
common/keymap.c
View file

@ -27,6 +27,7 @@ static action_t keycode_to_action(uint8_t keycode);
/* converts key to action */ /* converts key to action */
__attribute__ ((weak))
action_t action_for_key(uint8_t layer, keypos_t key) action_t action_for_key(uint8_t layer, keypos_t key)
{ {
uint8_t keycode = keymap_key_to_keycode(layer, key); uint8_t keycode = keymap_key_to_keycode(layer, key);
@ -117,8 +118,6 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{ {
} }
/* translates keycode to action */ /* translates keycode to action */
static action_t keycode_to_action(uint8_t keycode) static action_t keycode_to_action(uint8_t keycode)
{ {

2
common/suspend.h
View file

@ -6,7 +6,7 @@
void suspend_idle(uint8_t timeout); void suspend_idle(uint8_t timeout);
void suspend_power_down(uint8_t timeout); void suspend_power_down(void);
bool suspend_wakeup_condition(void); bool suspend_wakeup_condition(void);
void suspend_wakeup_init(void); void suspend_wakeup_init(void);

2
converter/adb_usb/README.md
View file

@ -88,7 +88,7 @@ modifiers except for GUI key(Windows/Command).
And most ADB keyboard has no diodes in its matrix so they are not NKRO, And most ADB keyboard has no diodes in its matrix so they are not NKRO,
though ADB protocol itself supports it. See protocol/adb.c for more info. though ADB protocol itself supports it. See protocol/adb.c for more info.
If keyobard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI If keyboard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI
keymap you will suffer from swapped keys problem. keymap you will suffer from swapped keys problem.
https://github.com/tmk/tmk_keyboard/issues/35 https://github.com/tmk/tmk_keyboard/issues/35

8
converter/m0110_usb/Makefile
View file

@ -17,7 +17,7 @@ SRC = matrix.c \
ifdef KEYMAP ifdef KEYMAP
SRC += keymap_$(KEYMAP).c SRC += keymap_$(KEYMAP).c
else else
SRC += keymap_plain.c SRC += keymap_default.c
endif endif
CONFIG_H = config.h CONFIG_H = config.h
@ -25,10 +25,8 @@ CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using # MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt # type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0 MCU = atmega32u2 # TMK converter rev2
MCU = atmega32u4 # Teensy 2.0 #MCU = atmega32u4 # TMK converter rev1
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency. # Processor frequency.

98
converter/m0110_usb/Makefile.teensy Normal file
View file

@ -0,0 +1,98 @@
# Target file name (without extension).
TARGET = m0110_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = matrix.c \
led.c \
keymap_common.c \
m0110.c
# To use own keymap file run make like: make keymap=hasu
ifdef KEYMAP
SRC += keymap_$(KEYMAP).c
else
SRC += keymap_default.c
endif
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# *Comment out* to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

25
converter/m0110_usb/README.md
View file

@ -1,6 +1,6 @@
M0110/M0110A to USB keyboard converter M0110/M0110A to USB keyboard converter
====================================== ======================================
This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
Read README of top directory too. Read README of top directory too.
@ -20,12 +20,13 @@ Update
- 2013/08: Change port for signals `PF` to `PD` - 2013/08: Change port for signals `PF` to `PD`
- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
- 2014/06: Change keymaps - 2014/06: Change keymaps
- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c)
Building Hardware Building Hardware
----------------- -----------------
You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) [![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg)
@ -38,6 +39,7 @@ Close-up picture of handset cable. You can see one end of plug has reverse color
[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) [![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1)
[Teensy]: http://www.pjrc.com/teensy/ [Teensy]: http://www.pjrc.com/teensy/
[TMK converter]: https://github.com/tmk/keyboard_converter
### Socket Pinout ### Socket Pinout
@ -53,17 +55,14 @@ You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular wh
Building Firmware Building Firmware
----------------- -----------------
To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap.
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source) $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb $ cd m0110_usb
$ make clean $ make -f Makefile clean
$ make $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}]
To select keymap use `KEYMAP` option. Use `Makefile.teensy` instead for Teensy.
$ make clean
$ make KEYMAP={plain|spacefn|hasu}
@ -71,13 +70,13 @@ Keymap
------ ------
To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this. To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this.
$ make clean $ make -f Makefile clean
$ make KEYMAP=name $ make -f Makefile KEYMAP=name
Debug Debug
----- -----
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Command>+H` simultaneously to get help. You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help.
- Command: `Shift+Option+Command`(`Shift+Alt+Gui` or `Shift+Alt+Control`) - Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`)

223
converter/m0110_usb/keymap.c
View file

@ -1,223 +0,0 @@
/*
Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* M0110A Support was contributed by skagon@github */
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "keymap.h"
/*
* The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
* of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
* on the M0110A, but since it generates a unique scan code which is not used for some other key in
* the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost)
* identical to the combination of the M0110 along with the M0120 keypad. The only difference
* (which is causing some problems as you will read below) is that the M0110+M0120 don't have
* dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
* doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
* substituted the [comma] key with the [=] key, however its scancode is the same.
*
* Physical layout:
* M0110A
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------' |-----------|Ent|
* |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*
* M0110 M0120
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -| +| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
* |---------------------------------------------------------| |---------------|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Ent |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
* With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
*
* NOTE: \ is located differently.
* NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
* NOTE: Left Shift and right Shift are logically same key.
* NOTE: Left Option and right Option are logically same key.
*/
/* Keymap definition Macro
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
* NOTE: Ent between Space and \ means Enter on M0110.
*/
#define KEYMAP( \
K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \
K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \
K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \
K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K08, KC_##K09, KC_NO, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \
{ KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \
{ KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
{ KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
{ KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \
{ KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \
}
#ifdef KEYMAP_SECTION_ENABLE
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
static const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
#endif
/* Default:
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
[0] = KEYMAP(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN15, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
LCTL,LGUI, FN16, LALT,FN31,LEFT,RGHT,DOWN, P0, PDOT
),
/* Cursor Layer(WASD, IJKL)
* ,---------------------------------------------------------. ,---------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
[3] = KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS,
LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT
),
[4] = KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS,
LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT
),
[7] = {},
};
/*
* Fn action definition
*/
#ifdef KEYMAP_SECTION_ENABLE
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
#else
static const uint16_t fn_actions[] PROGMEM = {
#endif
[0] = ACTION_LAYER_MOMENTARY(1),
[1] = ACTION_LAYER_MOMENTARY(2),
[2] = ACTION_LAYER_MOMENTARY(3),
[3] = ACTION_LAYER_MOMENTARY(4),
[4] = ACTION_LAYER_MOMENTARY(5),
[5] = ACTION_LAYER_MOMENTARY(6),
[6] = ACTION_LAYER_MOMENTARY(7),
[7] = ACTION_LAYER_TOGGLE(1),
[8] = ACTION_LAYER_TOGGLE(2),
[9] = ACTION_LAYER_TOGGLE(3),
[10] = ACTION_LAYER_TAP_TOGGLE(1),
[11] = ACTION_LAYER_TAP_TOGGLE(2),
[12] = ACTION_LAYER_TAP_TOGGLE(3),
[13] = ACTION_LAYER_TAP_KEY(1, KC_F),
[14] = ACTION_LAYER_TAP_KEY(2, KC_J),
[15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
[16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
[17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
[18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
[19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
[20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
[21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
[22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
[23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
[24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
[25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
[26] = ACTION_MODS_ONESHOT(MOD_LCTL),
[27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
[28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
[29] = ACTION_MODS_ONESHOT(MOD_LSFT),
[30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
[31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
};
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
}
/* translates Fn index to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
action_t action;
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
return action;
}

36
converter/m0110_usb/keymap_common.h
View file

@ -105,3 +105,39 @@ extern const uint16_t fn_actions[];
{ KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \
{ KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \
} }
/* International keyboard
* ,---------------------------------------------------------.
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33|
* |---------------------------------------------------------|
* | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
* |------------------------------------------------------, |
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| |
* |---------------------------------------------------------|
* | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38|
* `---------------------------------------------------------'
* | 3A| 37| 34 | 31| 3A|
* `------------------------------------------------'
*/
#define KEYMAP_INTL( \
K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \
K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \
K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K4D, K53,K54,K55,K4C, \
K3A,K37, K34, K31, K46,K42,K48, K52, K41 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \
{ KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \
{ KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
{ KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
{ KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \
{ KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \
}

85
converter/m0110_usb/keymap_default.c Normal file
View file

@ -0,0 +1,85 @@
/*
Copyright 2011,2012,2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "keycode.h"
#include "keymap_common.h"
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
/* Default:
* M0110 M0120
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
* |---------------------------------------------------------| |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Fn |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
* M0110A
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
[0] = KEYMAP(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
LALT,LGUI, SPC, FN0, BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
/* Cursor Layer
* ,---------------------------------------------------------. ,---------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *|
* |---------------------------------------------------------| |---------------|
* |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /|
* |---------------------------------------------------------| |---------------|
* |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
* |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Fn |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
*/
[1] = KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
LALT,LGUI, SPC, FN0, INS, HOME,END, PGDN, P0, PDOT
),
};
/*
* Fn action definition
*/
const uint16_t fn_actions[] PROGMEM = {
[0] = ACTION_LAYER_MOMENTARY(1),
};

85
converter/m0110_usb/keymap_intl.c Normal file
View file

@ -0,0 +1,85 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "keycode.h"
#include "keymap_common.h"
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
/* International keyboard
* M0110 M0120
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| /|
* |------------------------------------------------------, | |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
* |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Fn |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
* M0110A(not existent?)
* ,---------------------------------------------------------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| -|
* |------------------------------------------------------, | |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
[0] = KEYMAP_INTL(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, P4, P5, P6, PPLS,
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
LALT,LGUI, SPC, FN0, LEFT,RGHT,DOWN, P0, PDOT
),
/* Cursor Layer
* ,---------------------------------------------------------. ,---------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *|
* |---------------------------------------------------------| |---------------|
* |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |Ret| | 7| 8| 9| /|
* |------------------------------------------------------, | |---------------|
* |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Ins| | | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
* |Shif| <|End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Fn |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
*/
[1] = KEYMAP_INTL(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, ENT, P7, P8, P9, PMNS,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,INS, P4, P5, P6, PPLS,
LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
LALT,LGUI, SPC, FN0, HOME,END, PGDN, P0, PDOT
),
};
/*
* Fn action definition
*/
const uint16_t fn_actions[] PROGMEM = {
[0] = ACTION_LAYER_MOMENTARY(1),
};

2
converter/m0110_usb/keymap_plain.c
View file

@ -27,7 +27,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |---------------------------------------------------------| |---------------| * |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
* |---------------------------------------------------------| |---------------| * |---------------------------------------------------------| |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------| * |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent| * `---------------------------------------------------------' |-----------|Ent|

10
converter/m0110_usb/led.c
View file

@ -15,10 +15,18 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#include "stdint.h" #include <stdint.h>
#include <avr/io.h>
#include "led.h" #include "led.h"
void led_set(uint8_t usb_led) void led_set(uint8_t usb_led)
{ {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
DDRD |= (1<<6);
PORTD |= (1<<6);
} else {
DDRD |= (1<<6);
PORTD &= ~(1<<6);
}
} }

2
doc/keycode.txt
View file

@ -81,7 +81,7 @@ KC_F12 45 Keyboard F12
KC_PSCREEN KC_PSCR 46 Keyboard PrintScreen1 KC_PSCREEN KC_PSCR 46 Keyboard PrintScreen1
KC_SCKLOCK KC_SLCK 47 Keyboard Scroll Lock11 KC_SCKLOCK KC_SLCK 47 Keyboard Scroll Lock11
KC_PAUSE KC_PAUS 48 Keyboard Pause1 KC_PAUSE KC_PAUS 48 Keyboard Pause1
KC_INSERT KC_INT 49 Keyboard Insert1 KC_INSERT KC_INS 49 Keyboard Insert1
KC_HOME 4A Keyboard Home1 KC_HOME 4A Keyboard Home1
KC_PGUP 4B Keyboard PageUp1 KC_PGUP 4B Keyboard PageUp1
KC_DELETE KC_DELETE 4C Keyboard Delete Forward KC_DELETE KC_DELETE 4C Keyboard Delete Forward

1
doc/other_projects.md
View file

@ -29,6 +29,7 @@ Other Keyboard Firmware Projects
## ErgoDox[Ergo][Split][USB][AVR] ## ErgoDox[Ergo][Split][USB][AVR]
- <http://geekhack.org/index.php?topic=22780.0> - <http://geekhack.org/index.php?topic=22780.0>
- <https://github.com/benblazak/ergodox-firmware> - <https://github.com/benblazak/ergodox-firmware>
- <https://github.com/cub-uanic/tmk_keyboard>
## Suka's keyboard collection[Ergo][Split][3DPrinting][USB][AVR] ## Suka's keyboard collection[Ergo][Split][3DPrinting][USB][AVR]
- <http://deskthority.net/workshop-f7/my-diy-keyboard-collection-or-how-i-became-a-kb-geek-t2534.html> - <http://deskthority.net/workshop-f7/my-diy-keyboard-collection-or-how-i-became-a-kb-geek-t2534.html>

117
keyboard/ghost_squid/Makefile.lufa Normal file
View file

@ -0,0 +1,117 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = ghostsquid_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# List C source files here. (C dependencies are automatically generated.)
SRC = keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name
MCU = atmega32u2
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
#CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

20
keyboard/ghost_squid/README.md Normal file
View file

@ -0,0 +1,20 @@
The Ghost Squid controller
==========================
Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.
*Note that this is not the official firmware*
Build
-----
Move to this directory then just run `make` like:
$ make -f Makefile.lufa
At the moment only the LUFA stack is supported.
Bootloader
---------
To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.
It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.

43
keyboard/ghost_squid/config.h Normal file
View file

@ -0,0 +1,43 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED // 0x2516 (original CM XT value)
#define PRODUCT_ID 0x001A
#define DEVICE_VER 0x0000
#define MANUFACTURER Cooler Master
#define PRODUCT Cooler Master QuickFire XT
/* message strings */
#define DESCRIPTION t.m.k. keyboard firmware for Cooler Master QuickFire XT
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 18
/* Set 0 if need no debouncing */
#define DEBOUNCE 5
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

102
keyboard/ghost_squid/keymap.c Normal file
View file

@ -0,0 +1,102 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
#include "debug.h"
#include "keymap.h"
/*
Matrix col/row mapping
,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
|06/6| |07/4|08/4|08/2|08/6| |15/5|11/6|12/2|12/4| |14/4|14/5|14/6|14/0| |13/5|13/7|15/7|
`----' `-------------------' `-------------------' `-------------------' `--------------'
,-------------------------------------------------------------------------. ,--------------. ,-------------------.
|06/4|06/5|07/5|08/5|09/5|09/4|10/4|10/5|11/5|12/5|05/5|05/4|11/4| 14/2| |17/4|02/4|04/4| |16/1|17/1|04/1|04/0|
|-------------------------------------------------------------------------| |--------------| |-------------------|
|06/2 |06/7|07/7|08/7|09/7|09/2|10/2|10/7|11/7|12/7|05/7|05/2|11/2| 14/3| |16/4|02/5|04/5| |16/7|17/7|04/7| |
|-------------------------------------------------------------------------| '--------------' |-------------- 02/7|
|02/7 |06/3|07/3|08/3|09/3|09/6|10/6|10/3|11/3|12/3|05/3|05/6| 14/1| |16/2|17/2|04/2| |
|-------------------------------------------------------------------------| ,----. |-------------------|
|01/2 |06/1|07/1|08/1|09/1|09/0|10/0|10/1|11/1|12/1|05/0| 01/3| |02/6| |16/3|17/3|04/3| |
|-------------------------------------------------------------------------| ,--------------. |-------------- 02/3|
|15/4|03/2|13/6| 16/6 |13/0|0/3|12/0|15/1| |02/0|16/0|17/0| | 17/6 |04/6| |
`-------------------------------------------------------------------------' `--------------' `-------------------'
*/
#define KEYMAP( \
KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, KQ1, KR1, KE1, KE0, \
KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, KQ7, KR7, KE7, KC7, \
KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, KQ2, KR2, KE2, \
KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, KQ3, KR3, KE3, KC3, \
KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0, KR6, KE6 \
) { \
/* 0 1 2 3 4 5 6 7 */ \
/* A 0 */ {KC_NO, KC_NO, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_NO },\
/* B 1 */ {KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_NO, KC_NO, KC_NO, KC_NO },\
/* C 2 */ {KC_##KC0, KC_NO, KC_NO, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7},\
/* D 3 */ {KC_NO, KC_NO, KC_##KD2, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO },\
/* E 4 */ {KC_##KE0, KC_##KE1, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_##KE7},\
/* F 5 */ {KC_##KF0, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_##KF7},\
/* G 6 */ {KC_NO, KC_##KG1, KC_##KG2, KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7},\
/* H 7 */ {KC_NO, KC_##KH1, KC_##KH2, KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7},\
/* I 8 */ {KC_NO, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7},\
/* J 9 */ {KC_##KJ0, KC_##KJ1, KC_##KJ2, KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7},\
/* K 10 */ {KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7},\
/* L 11 */ {KC_NO, KC_##KL1, KC_##KL2, KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7},\
/* M 12 */ {KC_##KM0, KC_##KM1, KC_##KM2, KC_##KM3, KC_##KM4, KC_##KM5, KC_NO, KC_##KM7},\
/* N 13 */ {KC_##KN0, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KN5, KC_##KN6, KC_##KN7},\
/* O 14 */ {KC_##KO0, KC_##KO1, KC_##KO2, KC_##KO3, KC_##KO4, KC_##KO5, KC_##KO6, KC_NO },\
/* P 15 */ {KC_NO, KC_##KP1, KC_NO, KC_NO, KC_##KP4, KC_##KP5, KC_NO, KC_##KP7},\
/* Q 16 */ {KC_##KQ0, KC_##KQ1, KC_##KQ2, KC_##KQ3, KC_##KQ4, KC_NO, KC_##KQ6, KC_##KQ7},\
/* R 17 */ {KC_##KR0, KC_##KR1, KC_##KR2, KC_##KR3, KC_##KR4, KC_NO, KC_##KR6, KC_##KR7} \
}
#include "keymap_ansi.h"
#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0]))
#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
if (layer < KEYMAPS_SIZE) {
return pgm_read_byte(&keymaps[(layer)][(key.col)][(key.row)]);
} else {
return pgm_read_byte(&keymaps[0][(key.col)][(key.row)]);
}
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
action_t action;
if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
} else {
action.code = ACTION_NO;
}
return action;
}

23
keyboard/ghost_squid/keymap_ansi.h Normal file
View file

@ -0,0 +1,23 @@
static const uint8_t PROGMEM keymaps[][MATRIX_COLS][MATRIX_ROWS] = {
/* Layer 0: Standard ANSI layer */
KEYMAP(\
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, \
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, \
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, \
LCTL,LGUI,LALT, SPC, RALT,RGUI, FN0,RCTL, LEFT,DOWN,RGHT, P0, PDOT), \
/* Layer 1: Function layer */
KEYMAP(\
CALC,MYCM,WSCH,WHOM,MAIL,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS, WAKE, PWR,SLEP, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS)
};
static const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1)
};

60
keyboard/ghost_squid/led.c Normal file
View file

@ -0,0 +1,60 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
/* LED pin configuration
*
* Scroll Lock PB7
* CAPS PC6
* NUMLOCK PC5
*
*/
void led_set(uint8_t usb_led)
{
DDRB |= (1<<7);
DDRC |= (1<<5) | (1<<6);
if (usb_led & (1<<USB_LED_CAPS_LOCK))
{
PORTC &= ~(1<<6);
}
else
{
PORTC |= (1<<6);
}
if (usb_led & (1<<USB_LED_NUM_LOCK))
{
PORTC &= ~(1<<5);
}
else
{
PORTC |= (1<<5);
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
{
PORTB &= ~(1<<7);
}
else
{
PORTB |= (1<<7);
}
}

237
keyboard/ghost_squid/matrix.c Normal file
View file

@ -0,0 +1,237 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCE
# define DEBOUNCE 0
#endif
static uint8_t debouncing = DEBOUNCE;
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static uint8_t read_rows(void);
static void init_rows(void);
static void unselect_cols(void);
static void select_col(uint8_t col);
inline uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
unselect_cols();
init_rows();
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
select_col(col);
_delay_us(3);
uint8_t rows = read_rows();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
debouncing = DEBOUNCE;
}
}
unselect_cols();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop32(matrix[i]);
}
return count;
}
/* Row pin configuration
*
* row: 0 1 2 3 4 5 6 7
* pin: PB1 PC2 PB6 PB4 PB3 PB5 PB0 PB2
*
*/
static void init_rows(void)
{
DDRC &= ~0b00000100;
DDRB &= ~0b01111111;
PORTC |= 0b00000100;
PORTB |= 0b01111111;
}
static uint8_t read_rows(void)
{
return (PINB&(1<<1) ? 0 : (1<<0)) |
(PINC&(1<<2) ? 0 : (1<<1)) |
(PINB&(1<<6) ? 0 : (1<<2)) |
(PINB&(1<<4) ? 0 : (1<<3)) |
(PINB&(1<<3) ? 0 : (1<<4)) |
(PINB&(1<<5) ? 0 : (1<<5)) |
(PINB&(1<<0) ? 0 : (1<<6)) |
(PINB&(1<<2) ? 0 : (1<<7));
}
/* These columns uses two 74HC42 4 to 10 bit demultiplexers (low active).
*
* COL PD6 PD5 PD4 PD3 PD2 PD1
* 10 1 1 0 0 0 0
* 15 1 1 0 0 0 1
* 8 1 1 0 0 1 0
* 14 1 1 0 1 0 0
* 6 1 1 0 1 0 1
* 13 1 1 0 1 1 0
* 12 1 1 1 0 0 0
* 9 1 1 1 0 1 0
* 11 1 1 1 1 0 0
* 7 1 1 1 1 1 0
*
* COL PD1 PD2 PD3 PD4 PD5 PD6
* 3 1 1 0 0 0 1
* 4 1 1 0 0 1 0
* 17 1 1 0 1 0 0
* 16 1 1 0 1 1 0
* 0 1 1 1 0 0 1
* 5 1 1 1 0 1 0
* 2 1 1 1 1 0 0
* 1 1 1 1 1 1 0
*/
static void unselect_cols(void)
{
DDRD |= 0b01111111;
PORTD &= ~0b01111111;
}
static void select_col(uint8_t col)
{
switch (col) {
case 0:
PORTD |= (1<<6) | (1<<3) | (1<<2) | (1<<1);
break;
case 1:
PORTD |= (1<<5) | (1<<4) | (1<<3) | (1<<2) | (1<<1);
break;
case 2:
PORTD |= (1<<4) | (1<<3) | (1<<2) | (1<<1);
break;
case 3:
PORTD |= (1<<6) | (1<<2) | (1<<1);
break;
case 4:
PORTD |= (1<<5) | (1<<2) | (1<<1);
break;
case 5:
PORTD |= (1<<5) | (1<<3) | (1<<2) | (1<<1);
break;
case 6:
PORTD |= (1<<6) | (1<<5) | (1<<3) | (1<<1);
break;
case 7:
PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<3) | (1<<2);
break;
case 8:
PORTD |= (1<<6) | (1<<5) | (1<<2);
break;
case 9:
PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<2);
break;
case 10:
PORTD |= (1<<6) | (1<<5);
break;
case 11:
PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<3);
break;
case 12:
PORTD |= (1<<6) | (1<<5) | (1<<4);
break;
case 13:
PORTD |= (1<<6) | (1<<5) | (1<<3) | (1<<2);
break;
case 14:
PORTD |= (1<<6) | (1<<5) | (1<<3);
break;
case 15:
PORTD |= (1<<6) | (1<<5) | (1<<1);
break;
case 16:
PORTD |= (1<<5) | (1<<4) | (1<<2) | (1<<1);
break;
case 17:
PORTD |= (1<<4) | (1<<2) | (1<<1);
break;
}
}

22
keyboard/hhkb_rn42/Makefile → keyboard/hhkb/Makefile.rn42
View file

@ -39,7 +39,7 @@
#---------------------------------------------------------------------------- #----------------------------------------------------------------------------
# Target file name (without extension). # Target file name (without extension).
TARGET = hhkb_lufa TARGET = hhkb_rn42
# Directory common source filess exist # Directory common source filess exist
TOP_DIR = ../.. TOP_DIR = ../..
@ -53,13 +53,10 @@ SRC += keymap_common.c \
matrix.c \ matrix.c \
led.c led.c
CONFIG_H = config.h CONFIG_H = config_rn42.h
# MCU name # MCU name
# PJRC Teensy++ 2.0
#MCU = at90usb1286
# TMK Alt Controller or PJRC Teensy 2.0
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency. # Processor frequency.
@ -121,11 +118,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
#HHKB_JP = yes # HHKB JP support #HHKB_JP = yes # HHKB JP support
ifdef HHKB_JP
OPT_DEFS += -DHHKB_JP
endif
# #
# Keymap file # Keymap file
# #
@ -134,12 +126,17 @@ ifdef KEYMAP
else else
ifdef HHKB_JP ifdef HHKB_JP
SRC := keymap_jp.c $(SRC) SRC := keymap_jp.c $(SRC)
else else
SRC := keymap_hasu.c $(SRC) SRC := keymap_hhkb.c $(SRC)
endif endif
endif endif
ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
OPT_DEFS += -DHHKB_JP
endif
# Search Path # Search Path
VPATH += $(TARGET_DIR) VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR) VPATH += $(TOP_DIR)
@ -154,4 +151,5 @@ debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
debug-on: all debug-on: all
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
debug-off: all debug-off: all

17
keyboard/hhkb/README.md
View file

@ -10,11 +10,17 @@ See [this thread][AltController] in geekhack.org.
[AltController]: http://geekhack.org/index.php?topic=12047.0 [AltController]: http://geekhack.org/index.php?topic=12047.0
## Update
* Bluetooth module RN-42 is supported.(2015/01)
* V-USB and iWRAP are no longer supported now, but still it'll works with a little fix. See not_supported directory.(2015/01)
##Features ##Features
* Customizable keymap * Customizable keymap
* More keymap layers(more Fn keys) * More keymap layers(more Fn keys)
* Mouse keys * Mouse keys
* USB NKRO * USB NKRO
* Bluetooth(RN-42)
See README of [tmk_keyboard] for more. See README of [tmk_keyboard] for more.
@ -50,8 +56,9 @@ If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER
### Build ### Build
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like: Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:
$ make KEYMAP=[hasu|hhkb|spacefn|<name>] $ make -f Makefile.<jp|pjrc|rn42> KEYMAP=(hasu|hhkb|spacefn|<name>)
$ make -f Makefile.jp KEYMAP=[jp|<name>] # for HHKB JP
You can omit `-f` option when you use `Makefile`. `Makefile` is used for **Pro2 and Pro**, `Makefile.jp` fits for **JP** model and `Makefile.rn42` supports Bluetooth module **RN-42**. `Makefile.pjrc` uses **PJRC** as output protocol instead of **LUFA**.
### Program ### Program
@ -59,13 +66,11 @@ First, push reset button on board to start bootloader.
This command programs the controller with [dfu-programmer] if the tool is installed and configured properly. This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.
$ make dfu $ make -f Makefile.<variant> KEYMAP=<name> dfu
$ make -f Makefile.jp dfu # for HHKB JP
Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available. Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.
$ make flip $ make -f Makefile.<variant> KEYMAP=<name> flip
$ make -f Makefile.jp flip # for HHKB JP
Use [Teensy Loader] if your controller is Teensy/Teensy++. Use [Teensy Loader] if your controller is Teensy/Teensy++.

0
keyboard/hhkb_rn42/config.h → keyboard/hhkb/config_rn42.h
View file

28
keyboard/hhkb/hhkb_avr.h
View file

@ -41,17 +41,32 @@ static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
#ifdef HHKB_POWER_SAVING
static inline void KEY_POWER_ON(void) {
DDRB = 0xFF; PORTB = 0x40; // change pins output
DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
/* Without this wait you will miss or get false key events. */
_delay_ms(5); // wait for powering up
}
static inline void KEY_POWER_OFF(void) {
/* input with pull-up consumes less than without it when pin is open. */
DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
}
static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); }
#else
static inline void KEY_POWER_ON(void) {} static inline void KEY_POWER_ON(void) {}
static inline void KEY_POWER_OFF(void) {} static inline void KEY_POWER_OFF(void) {}
static inline bool KEY_POWER_STATE(void) { return true; }
#endif
static inline void KEY_INIT(void) static inline void KEY_INIT(void)
{ {
/* row,col,prev: output */
DDRB = 0xFF; DDRB = 0xFF;
PORTB = 0x00; PORTB = 0x40; // unable
/* key: input with pull-up */
DDRD &= ~0x80; DDRD &= ~0x80;
PORTD |= 0x80; PORTD |= 0x80;
/* keyswitch board power on */
DDRD |= (1<<4);
PORTD |= (1<<4);
#ifdef HHKB_JP #ifdef HHKB_JP
/* row extention for HHKB JP */ /* row extention for HHKB JP */
DDRC |= (1<<6|1<<7); DDRC |= (1<<6|1<<7);
@ -59,6 +74,8 @@ static inline void KEY_INIT(void)
#endif #endif
KEY_UNABLE(); KEY_UNABLE();
KEY_PREV_OFF(); KEY_PREV_OFF();
KEY_POWER_OFF();
} }
static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
{ {
@ -98,6 +115,7 @@ static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) #define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON() #define KEY_POWER_ON()
#define KEY_POWER_OFF() #define KEY_POWER_OFF()
#define KEY_POWER_STATE() true
#else #else

34
keyboard/hhkb/keymap_hasu.c
View file

@ -27,7 +27,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \
FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
LGUI,LALT, FN4, FN5, FN5), LGUI,LALT, FN4, FN5, RGUI),
/* Layer 1: HHKB mode[HHKB Fn] /* Layer 1: HHKB mode[HHKB Fn]
* ,-----------------------------------------------------------. * ,-----------------------------------------------------------.
@ -47,7 +47,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \
LGUI,LALT, SPC, RALT,RGUI), LGUI,LALT, TRNS, RALT,RGUI),
/* Layer 2: Vi mode[Slash] /* Layer 2: Vi mode[Slash]
* ,-----------------------------------------------------------. * ,-----------------------------------------------------------.
@ -66,7 +66,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \ LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \
LGUI,LALT, SPC, RALT,RGUI), LGUI,LALT, SPC, RALT,RGUI),
/* Layer 3: Mouse mode(IJKL)[Semicolon] /* Layer 3: Mouse mode(IJKL)[Semicolon]
@ -81,16 +81,16 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* `-----------------------------------------------------------' * `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn | * |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------' * `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/ */
[3] = \ [3] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \ LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, BTN1, TRNS,TRNS), LGUI,LALT, BTN1, TRNS,TRNS),
/* Layer 5: Mouse mode(IJKL)[Space] /* Layer 4: Mouse mode(IJKL)[Space]
* ,-----------------------------------------------------------. * ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------| * |-----------------------------------------------------------|
@ -102,13 +102,13 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* `-----------------------------------------------------------' * `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn | * |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------' * `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/ */
[4] = \ [4] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, TRNS, TRNS,TRNS), LGUI,LALT, TRNS, TRNS,TRNS),
#if 0 #if 0
@ -127,9 +127,9 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/ */
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \ TAB, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \ LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,SLSH,RSFT,NO, \ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \
LGUI,LALT, BTN1, RALT,TRNS), LGUI,LALT, BTN1, RALT,TRNS),
/* Layer4: Mouse mode(HJKL)[Space] /* Layer4: Mouse mode(HJKL)[Space]
@ -147,9 +147,9 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/ */
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, WBAK,WFWD,FN8, \ FN8, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \ LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
LGUI,LALT, TRNS, RALT,RGUI), LGUI,LALT, TRNS, RALT,RGUI),
#endif #endif
#if 0 #if 0
@ -201,10 +201,12 @@ const uint16_t fn_actions[] PROGMEM = {
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
[5] = ACTION_LAYER_MOMENTARY(3), // Mousekey layer [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL)
[6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
[8] = ACTION_MACRO(ALT_TAB), // Application switching [8] = ACTION_MACRO(ALT_TAB), // Application switching
[9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
[10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace // [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc // [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc

27
keyboard/hhkb/matrix.c
View file

@ -27,8 +27,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "timer.h" #include "timer.h"
#include "matrix.h" #include "matrix.h"
#include "hhkb_avr.h" #include "hhkb_avr.h"
#include <avr/wdt.h>
#include "suspend.h"
#include "lufa.h"
// matrix power saving
#define MATRIX_POWER_SAVE 10000
static uint32_t matrix_last_modified = 0;
// matrix state buffer(1:on, 0:off) // matrix state buffer(1:on, 0:off)
static matrix_row_t *matrix; static matrix_row_t *matrix;
static matrix_row_t *matrix_prev; static matrix_row_t *matrix_prev;
@ -72,7 +79,8 @@ uint8_t matrix_scan(void)
matrix_prev = matrix; matrix_prev = matrix;
matrix = tmp; matrix = tmp;
KEY_POWER_ON(); // power on
if (!KEY_POWER_STATE()) KEY_POWER_ON();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) {
KEY_SELECT(row, col); KEY_SELECT(row, col);
@ -126,8 +134,16 @@ uint8_t matrix_scan(void)
// This takes 25us or more to make sure KEY_STATE returns to idle state. // This takes 25us or more to make sure KEY_STATE returns to idle state.
_delay_us(75); _delay_us(75);
} }
if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
}
// power off
if (KEY_POWER_STATE() &&
(USB_DeviceState == DEVICE_STATE_Suspended ||
USB_DeviceState == DEVICE_STATE_Unattached ) &&
timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) {
KEY_POWER_OFF();
suspend_power_down();
} }
KEY_POWER_OFF();
return 1; return 1;
} }
@ -165,3 +181,10 @@ void matrix_print(void)
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
} }
} }
void matrix_power_up(void) {
KEY_POWER_ON();
}
void matrix_power_down(void) {
KEY_POWER_OFF();
}

0
keyboard/hhkb/Makefile.iwrap → keyboard/hhkb/not_supported/Makefile.iwrap
View file

0
keyboard/hhkb/Makefile.vusb → keyboard/hhkb/not_supported/Makefile.vusb
View file

0
keyboard/hhkb/config_iwrap.h → keyboard/hhkb/not_supported/config_iwrap.h
View file

0
keyboard/hhkb/config_vusb.h → keyboard/hhkb/not_supported/config_vusb.h
View file

0
keyboard/hhkb/iwrap.txt → keyboard/hhkb/not_supported/iwrap.txt
View file

0
keyboard/hhkb/usbconfig.h → keyboard/hhkb/not_supported/usbconfig.h
View file

0
keyboard/hhkb_rn42/rn42.mk → keyboard/hhkb/rn42.mk
View file

255
keyboard/hhkb/rn42/MEMO.txt Normal file
View file

@ -0,0 +1,255 @@
Memo of deveopment
==================
just memo, NOT WORTH READING
Bug:
- Factory Reset PIO4 doesn't work
- the reason is unclear - 12/08 NOT LOOK INTO ANY MORE
- WORKAROUND: use serial pins(3.3V, GND, RX and TX)
- SF,1 and R,1 to set factory defalult
Todo:
- LED cover and switch knob and new Slide Switch
- RN42 auto configuration
- configure the module as HID device every time powering up
- this'll reduce work load of assembly
- move rn42 to protocol directory when it becomes reusable stack
- sendchar() in lufa.c no buffer
- no buffering. character lost can be caused.
- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
- BT operations
- disconnect
- new connection
- remove connection
- sendchar() in lufa.c block loop - DONE 11/29
- block loop when powered with AC adapter
- FrameNumber is not updated when adapter powered
Improving:
- ADC resolution
AVR120
AVR32138
- Enhancing ADC resolution by oversampling
AVR121 http://www.atmel.com/images/doc8003.pdf
- disable digital input buffer DIDR(7.8.6)
Design:
- suspend.h - DONE 11/26
- remove argument from suspend_power_down() for backward compatitibility
- remove MCU dependent power saving code from core/keyboard - DONE 11/23
- it should be located in project matrix.c
- HHKB matrix.c needs matrix_prev?
- is_modified() is obsolete now. really needs?
- ADC: removing AREF capacitor C10
- seems to be better while usb powered
- still bad while battery powered
http://electronics.stackexchange.com/questions/105849/avcc-and-capacitor-using-adc
- ADC: smaller resistors for voltage dividor
- 1K + 1K: not improved. - 11/27
LUFA:
USB connection check: state of USB deivce
- USB_DeviceState:
USB_Deivce_State_t { Unattached, Powered, Default, Addressed, Configured*, Suspended* }
Unattached: unpluged
Powered: pluged with power adapter
Default: enumerate process bigin
Addressed: addressed
Configured: enumerated
Suspended: suspended
- USB_IsInitialized: state of LUFA core setup
becomes true in USB_Init() USBController_AVR8.c
becomes false in USB_Disable() USBController_AVR8.c
- USB_VBUS_GetStatus(): state of VBUS(power/connection)
- USB_Disable() detaches, disables all interrupts, controller, PLL, regulater.
- When connect to power adapter
- event happened: CW or CSW or C or DDC
- USB state: not configured
- USB evnets
- USB connect: CSWRWRW
- USB connect but fail to enumeration: CWRWRWRWS
- USB disconnect: D
- Power adapter connect: CW, CSW, C
- Power adapter disconnect: D
Power saving:
- Pro2 current consumption
- active: 138.2mA(no device on Hub)
- suspended: 30.9mA(WakeUp enabled DIPSW6)
- suspended: 0mA->46.0mA(WakeUp disabled DIPSW6)
- Pro current consumption
- active: 54.0mA
- suspended: 40.5mA(WakeUp enabled DIPSW6)
- suspended: 0.3mA(WakeUp disabled DIPSW6)
- RN42 3.3V
- disconnected(Idle): 5mA (config mode)
- connected(Active):
SW,0000: 23-26mA
SW,0010: 27-29mA worse than 0000 for unknown reason
SW,0020: 17-19mA mouse NG
SW,0030: 13-16mA laggy mouse NG
SW,0050: 10-13mA laggy mouse NG
- matrix power saving
- power saving while externally powered and not while unpluged
- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition
- 8MHz clock
- When not connected in a few minutes get into deep sleep to save battery life
- CTS is needed for waking up from deep sleep? How deep sleep is activated?
- firmware controlled 3.3V DC converter to switch on/off BT module
- sleep MCU and BT module(keyboard is not used)
- deep sleep MCU and BT module(keyboard is not used for long time)
- deep sleep MCU and turn off BT module(keyboard is not used and not connected)
- Battery ADC; switching, high resistance
- switching gnd end of divider with PF4
- high resistor 100K/1M?
capacitor 10nF
http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/
- During USB suspend change clock source to internal RC from external Xtal(6.8)
- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3)
- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13)
- Voltage reference(8.1.1)
- to reduce power consumption while power down mode
- unset ADEN before sleep(24.7)
Lipo
----
850mA lasts around 9 hours(07/28)
Sparkfun Polymer Lithium Ion Battery 850mAh:
https://www.sparkfun.com/products/341
Lipo Cell spec:
https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf
Protection spec:
http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf
min typical max
over-charge 4.255 4.280 4.305
over-charge discover? 4.030 4.080 4.130
over-discharge 2.827 2.900 2.973
over-discharge discover 3.022 3.100 3.178
ADC voltage monitor: voltage divider 10K+10K(0.5)
ADC=V*0.5/2.56*1024
V ADC
------------------
4.20 0x347(839)
3.10 0x26b(619)
TROUBLE SHOOT
-------------
07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
07/18 On Linux, had an USB related trouble; keyboard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
12/07 rn42_rts() read 1 every time. R12 broke in open mode(no coductive), idk why, too much heat with soldering? and PF1 pin was not soldered.
It resolved with resoldering PF1 and new resistor on R12.
Done:
- low battery alert(solid light) 09/04
- *** Rev.E BT test *** - DONE
- with MCP73832, new Schottky, tantalum caps - DONE 12/07
* MCP73832 doesn't leak from Vcc pin when unpluged and battery powered
34mV vs 2.07V(MCP73831) at Vcc pin
MCP73832 doesn't need revese protection diode D5
* PMEG2010ER is very low VF while reverse current/voltage is high
VF=0.96 vs 1.98(RB160M-30TR)with Fluke 175
Anode of D11 is 680mV vs 20mV(RB160M-30TR)
780mV is still low < 1.4V VBUS plugin detection(21.11)
this doesn't cause false VBUS detect
and 780mV on MCP73832 Vcc pin is also no problem.
D5 can be removed.
- ADC divider switching - DONE 12/07
* Drain and Source of Q4 Pch was reversed wrongly on Rev.E.
- reverse current from Lipo charger - DONE 12/07
* MCP73832 has no recverse current from Vcc pin unlike MCP73831
- Rev.F design - DONE
- current measure point - DONE 12/08
- change value of cap 68->47 - DONE 12/08
- PPTC land pattern: no solder jumper, use 0Ohm resistor instead - CANCEL 12/08
- Q4 Pch FET: wrong Drain and Source - DONE 12/08
- D5 can be removed. - DONE 12/08
- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30
- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm
- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB
- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done
- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done
- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24
- LINKED: add trace on PIO2 to PF6 07.24
- Lipo voltage ADC sensing
- Lipo charger MCP73831: needs capacitor 4.7uF *2
- USB connection check - 07.01
- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01
- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01
- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
- wrongly suspended when powered from adapter without USB connection - DONE
- suspend event may occur when plug into adapter
- and never wake until conected to real USB line
- without debug print via USB no problem; CSW(wake just after suspend as real USB line)
- seems like USB print causes this problem after suspended
- lose USB connection during power-down mode - DONE
- USB initialize code in main() causes this - WRONG
- Do not power-down during USB connection is active - DONE 11/11
(USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection
matrix_power_down() matrix.c - 11/23
- with Nexus5 keyboard and mouse are very laggy.
Not confirmed. 01/15
- switch BT host connections - CANCEL 01/15
- switch next connection
cannot switch connection with version 6.15 at least
- When given power only from wall wart adapter - DONE? not confirmed 01/15
- it sleeps. it should not sleep
- Configured state without USB connection?
- timer is slow while power down - DONE 11/26
- time out interrupt is lost while power down?
- interrupt of watchdog timer compensates timer counter(avr/suspend.c)
- repeated CHARGING/FULL_CHARGED - No longer problem 01/15
- In LTC sharp pulses are observed.
- MCP has no pulse but still has a problem.
- needs more wait before read pin state? - NO
- USB plug-in fails while BT - No longer problem 01/15
- it ends in suspend state
- maybe, not responsive to host enumeration process due to power-down.
- matrix_power_down() only when state is unattached - 11/26
- need to observe a while

64
keyboard/hhkb_rn42/PowerSave.txt → keyboard/hhkb/rn42/PowerSave.txt
View file

@ -1,5 +1,28 @@
RN-42 Power Saving
===== ============
MCU+HHKB Power Comsumption
--------------------------
Battery drive:
idle 18.9mA
active 35.8mA
USB powered:
40.0mA
52mA 01/17
Other keyboards:
HHKB Pro 55mA
HHKB Pro2 140mA
HHKB Pro 42mA(Alt)
HHKB Pro2 52mA(Alt BT controller USB mode)
HHKB Pro2 88mA(Alt BT controller BT mode connected)
HHKB Pro2 68mA(Alt BT controller BT mode config mode)
Poker X 6mA
Infinity 24mA(TMK)
65mA(kiibohd)
HHKB key switch power control HHKB key switch power control
----------------------------- -----------------------------
@ -63,40 +86,3 @@ S%,1000 status led and connection control don't work
GPIO5: status LED GPIO5: status LED
GPIO6: Connection control GPIO6: Connection control
GPIO2: linked status GPIO2: linked status
Ver 6.15 04/26/2013
(c) Roving Networks
***Settings***
BTA=00066667BBE9
BTName=tmkBT-BBE9
Baudrt(SW4)=115K
Mode =DTR
Authen=1
Bonded=0
Rem=001BDC06415B
***ADVANCED Settings***
SrvName= keyboard/mouse
SrvClass=0000
DevClass=1F00
InqWindw=0012
PagWindw=0012
CfgTimer=255
StatuStr=NULL
HidFlags=3c
DTRtimer=8
KeySwapr=0
***OTHER Settings***
Profile= HID
CfgChar= $
SniffEna=8010
LowPower=0 S|,
TX Power=fff4 SY,
IOPorts= 0
IOValues=0
Sleeptmr=0
DebugMod=0
RoleSwch=0

408
keyboard/hhkb/rn42/RN42.txt Normal file
View file

@ -0,0 +1,408 @@
RN-42 Bluetooth Module Support
==============================
Bluetooth controller board works with HHKB Pro2, JP, Type-S and Type-S JP and it supports both USB and Bluetooth as keyboard output protocol. Bluetooth module Roving Networks/Microchip RN-42 is installed on the board.
RN-42:
http://www.microchip.com/wwwproducts/Devices.aspx?product=RN42
Capabitlities:
- USB keyboard functions
completely equivarent to USB controller including mouse keys and NKRO.
- Switching between USB and Bluetooth
You can switch the two connections with BT switch or key combination.
- RN-42 config mode
You can change power/connection configuration of the module if needed.
- Low battery alert
Red LED turns on when low voltage.
- RN-42 status indicator
LED indicates status of Bluetooth connection.
- Pairing
The module stores up to 8 connections.
- Auto connect
The module connects the last connected device automatically.
- iOS support
works as keyboard with iPhone5. No tested completely.
- Android support
works as keyboard and mouse with Nexus5. No tested completely.
- Mouse keys over BT
Note that iOS doesn't accept mouse device.
Limitations:
- Short battery life
Around 12hr with 1000mAh
- No connection switching
RN-42 auto-connects to the last connected device.
Some of consumer products can switch between devices, for example Logitech K480.
http://www.logitech.com/en-us/product/multi-device-keyboard-k480?crid=26
- HHKB JP requires case modification for BT switch and LEDs.
without switch power controlled by MCU? Probably using 3.3V regulator enable pin power of RN-42 can be controlled.
NOTE:
- LIPO BATTERY IS VERY DANGEROUS, TAKE EXTRA CARE OF YOUR SAFETY AND PROPERTY.
- RN-42 version 6.15 is supported.
- No NKRO over Bluetooth
- Check you country's wiress regulation and certification of RN-42.
Bugs:
Todos:
Lipo Battery
------------
You can use 3.7V Lithium Ion battery with JST PH 2pin connector and protection circuit.
Battery space inside HHKB is around 54mm x 50mm and its height is 7mm.
Sparkfun 850mAh
https://www.sparkfun.com/products/341
Sparkfun 1000mAh
https://www.sparkfun.com/products/339
Sparkfun 2000mAh battery won't fit due to its size.
Learn about Lipo battery:
https://learn.adafruit.com/li-ion-and-lipoly-batteries
LED Status
----------
Configuring 10 times per sec
Startup/configuration timer 2 times per sec
Discoverable/Inquiring/Idle once per sec
Connected solid on
RN-42 Magic Command
--------------------
Magic key combination is 'LShift+RShift' by default in case of HHKB.
Here is help.
----- Bluetooth RN-42 Help -----
i: RN-42 info
b: battery voltage
Del: enter/exit RN-42 config mode
Slck: RN-42 initialize
p: pairing
u: toggle Force USB mode
RN-42 info: displays information of the module on console.
battery voltage: displays current voltage of battery and uptime.
RN-42 initialize: does factory reset and configures RN-42
pairing: enters Pairing mode.
toggle Force USB mode: switch between USB and Bluetooth
RN-42 Config mode
-----------------
You can tune/operate RN-42 yourself with config(command) mode.
1. hook up USB cable
2. run `hid_listen` command in console
3. turn on Bluetooth switch
4. press LShift+RShift+Delete(Fn+~) you will see output like followings:
Entering config mode ...
CMD
v
Ver 6.15 04/26/2013
(c) Roving Networks
5. do config with RN-42 commands. See documentations of RN-42.
6. to exit also press LShift+RShift+Delete(Fn+~)
Exiting config mode ...
---
END
RN-42 Initial Configuration
---------------------------
RN-42 is configured as SPP device at factory reset, you need to configure it as HID device. This is needed just once first time.
1. hook up USB cable
2. run `hid_listen` command in console
3. turn on Bluetooth switch
4. press LShift+RShift+ScrLk(Fn+O) you will see output like followings:
Entering config mode ...
CMD
Ver 6.15 04/26/2013
(c) Roving Networks
ECHO ON
SF,1
AOK
S-,TmkBT
AOK
SS,Keyboard/Mouse
AOK
SM,4
AOK
SW,8000
AOK
S~,6
AOK
SH,003C
AOK
SY,FFF4
AOK
R,1
Reboot!
Exiting config mode ...
5. output of command 'X' after cofiguration
Ver 6.15 04/26/2013
(c) Roving Networks
***Settings***
BTA=00066667BBE9
BTName=TmkBT-BBE9
Baudrt(SW4)=115K
Mode =DTR
Authen=1
PinCod=1234
Bonded=0
Rem=NONE SET
***ADVANCED Settings***
SrvName= Keyboard/Mouse
SrvClass=0000
DevClass=1F00
InqWindw=0100
PagWindw=0100
CfgTimer=255
StatuStr=NULL
HidFlags=3c
DTRtimer=8
KeySwapr=0
***OTHER Settings***
Profile= HID
CfgChar= $
SniffEna=8000
LowPower=0
TX Power=fff4
IOPorts= 0
IOValues=0
Sleeptmr=0
DebugMod=0
RoleSwch=0
Switch to USB mode
------------------
You can switch between USB and Bluetooth with pressing 'LShift+RShift+u'.
Pairing mode
------------
This disconnects current connect and enter pairing mode.
For deveropment
===============
RN-42 Serial Connection
-----------------------
UART: 115200bps, 8bit, 1-stopbit, non-parity, no flow control
SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth)
To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD') and type '+' to get local echo. To exit type '---'(you will see 'END').
RN-42 Commands
--------------
S-,tmkBT // Device name
SS,keyboard/mouse // service name
SM,4 // Auto Connect DTR mode
SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save
S~,6 // HID profile
S~,0 // SPP profile
SH,003C // HID register
SY,0004 // Transmit power
SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc)
SD,05C0 // bit 12-8 7 6 5-0
// 00101 1 1 0
// peripheral pointing keybaord joystick, gamepad, ...
SM,6 // Pairing mode: auto connect
SM,4 // Master mode: Connection can be controled with GPIO6
SF,1 // Factroy reset
R,1 // reboot
SR,Z // removes all remote addresses for reconnecting.
// can be used to connect another host
SR,I // registers last inquiry address
Operation Modes
---------------
SM,3 Auto Connect Master mode
SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR)
confirm: auto connect works and control connection with GPIO6
SM,5 Auto Connect ANY Mode (Mode =ANY)
each time GPIO is set, make inquiry and connect to the first found device
SM,6 automatically reconnect(Mode =Pair)
confirm: auto connect works well but difficult to enter command mode.
HID flag register
-----------------
SH,0200
GH
10 0000 0000(0200) default
00 0011 1000(0038) Combo
|| | | |\_\____ number of paired devices to which the module can reconnect
|| | | \_______ send out reports over UART (0xFF <len> <data>)
|| \__\_________ descriptor type
|\______________ toggle virtual keyboard on iOS when first connected
\_______________ Force HID mode if GPIO11 is high on power-up
Descriptor type:
0000: keybaord
0001: Game Pad
0010: Mouse
0011: Combo
0100: Joystick
1xxx: reserved
Out report - Indicator
----------------------
0xFE 0x02 0x01 <LED_state>
Apple iOS
---------
Keyboard can be used with iPhone, but mouse cannot.
Android
-------
3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds.
Power Management
----------------
Inquiry and Page window Idle or Active (3.1.1)
Downside: delay in discovery or connection time
SI, // set inquiry scan window(discovery) on/off duty?
SJ, // set page scan window(connection)
This reduces averaege power >20mA to 5mA(3mA in Sniff mode)
Sniff mode Transmit
Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA)
In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA)
SW,<val> // set interval timer(*0.625ms) 0000-7FFF
Deep sleep Idle (3.1.2)
In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer.
SW,8320 // deep sleep enable(interval=0x320*0.625=500ms)
In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second.
To wake from deep sleep there are three ways: (in worst case wake up takes 5ms)
*send a charactor to the UART(first charactor will be lost)
*toggle CTS low to high and wait 5ms
*wake automatically every slot time(<val>*0.625ms)
Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again.
Downside: latency and data loss
Disable Output driver Idle or Active (3.1.3)
S%,1000 // set all GPIO pins(0-11) to inputs.
Lower Transmit Power Idle or Active (3.1.4)
SY,<hex> // transmit power setting(takes effect after a power cycle and reboot)
Downside: reducing effective range
Optimizig for Latency
---------------------
By default the firmware is optimized for throughput.
SQ,16 // set latency bit
SQ,0 // unset latency bit
Configuration timer settings
----------------------------
Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?).
The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.)
ST,0 // no remote, no local when connected
ST,<1-252> // local and remote with timeout in seconds from power up
ST,253 // local only without timeout
ST,254 // remote only without timeout
ST,255 // local and remote without timeout
Commands
--------
S7, 7bit mode
SA, Authenticaiton
SB, Send break
SC, Service class
SD, Device class
SM,<val> Operation mode
SP,<string> Pin code(alpahnumeric)
SQ,<mask> Special configuration(GPIO, discovery mode, low latency, reboot, UART)
SR,<hex> Store remote address
SR,Z Erase all address
SS,<string> Set service name(1-20)**
ST,<val> Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer)
SU,<val> UART baud rate
SW,<val> low-power sniff mode** deep sleep and wake up every 625us * <val>
SX,<0|1> bonding enable only acceps device that matches the stored address
SY,<hex> power setting**
SZ,<val> non-standard raw baud rate <val>=baud*0.004096
S~,<val> Profile 0:SPP, 5:APL, 6:HID
S-,<string> Device name -15 alphanumeric charactors
S?,<0|1> role switch enable
S$,<char> command mode char
$|,<hex> low-power connect mode deep sleep/active(discoverable and connectable) cycle
D display basic setting
E display extended setting
GB display the device's Bluetooth address
GF display Bluetooth address of connected device
GK show connection status
GR show remote address for reconnecting
G& show GPIO pin
G<char> show stored setting
+ toggle local echo on/off
& show GPIO 3,4,6,7(DIP switch)
C connect to stored remote address
C,<address> connect last address
CFI connect and go into fast data mode
CFR connect and go into fast data mode
CT,<address>,<val> connect to the address and disconnect after val?
F,1 fast data mod:
H display help
I,<time>,<cod> inquiry scan with <cod>
IN,<time>,<cod> inquiry scan with <cod>, return without BT name
IR inquiry scan with 0055AA
IS inquiry scan with 001F00
J hide pin code
K, kill disconnects current connection
L link quality
M show modem signlal status
O display other settings
P,<char> pass through?
Q quiet mode make the module not discoverable
Q,0 discoverable and connectable
Q,1 not discoverable and not connectable
Q,2 not discoverable and connectable
Q,? display current quiet mode
R,1 reboot
T,<0|1> pass received data while in command mode
U,<baud>,<parity> change UART setting tentatively
V display firmware version
W wake from quiet mode enable discovery and connection
Z deep sleep mode(<2mA)
Reset to Factory Default
------------------------
SF,1
R,1

20
keyboard/hhkb_rn42/rn42/battery.c → keyboard/hhkb/rn42/battery.c
View file

@ -20,7 +20,10 @@ void battery_init(void)
// Ref:2.56V band-gap, Input:ADC0(PF0), Prescale:128(16MHz/128=125KHz) // Ref:2.56V band-gap, Input:ADC0(PF0), Prescale:128(16MHz/128=125KHz)
ADMUX = (1<<REFS1) | (1<<REFS0); ADMUX = (1<<REFS1) | (1<<REFS0);
ADCSRA = (1<<ADPS2) | (1<<ADPS1) | (1<<ADPS0); ADCSRA = (1<<ADPS2) | (1<<ADPS1) | (1<<ADPS0);
ADCSRA |= (1<<ADEN); // digital input buffer disable(24.9.5)
DIDR0 = (1<<ADC0D) | (1<<ADC4D) | (1<<ADC7D);
DIDR1 = (1<<AIN0D);
DIDR2 = (1<<ADC8D) | (1<<ADC9D) | (1<<ADC11D) | (1<<ADC12D) | (1<<ADC13D);
// ADC disable voltate divider(PF4) // ADC disable voltate divider(PF4)
DDRF |= (1<<4); DDRF |= (1<<4);
@ -88,23 +91,14 @@ uint16_t battery_voltage(void)
PORTF |= (1<<4); PORTF |= (1<<4);
volatile uint16_t bat; volatile uint16_t bat;
//ADCSRA |= (1<<ADEN); ADCSRA |= (1<<ADEN);
_delay_ms(1); // wait for charging S/H capacitance
// discard first result
ADCSRA |= (1<<ADSC);
while (ADCSRA & (1<<ADSC)) ;
bat = ADC;
// discard second result
ADCSRA |= (1<<ADSC);
while (ADCSRA & (1<<ADSC)) ;
bat = ADC;
ADCSRA |= (1<<ADSC); ADCSRA |= (1<<ADSC);
while (ADCSRA & (1<<ADSC)) ; while (ADCSRA & (1<<ADSC)) ;
bat = ADC; bat = ADC;
//ADCSRA &= ~(1<<ADEN); ADCSRA &= ~(1<<ADEN);
// ADC disable voltate divider(PF4) // ADC disable voltate divider(PF4)
DDRF |= (1<<4); DDRF |= (1<<4);

0
keyboard/hhkb_rn42/rn42/battery.h → keyboard/hhkb/rn42/battery.h
View file

19
keyboard/hhkb_rn42/rn42/main.c → keyboard/hhkb/rn42/main.c
View file

@ -17,8 +17,8 @@
static int8_t sendchar_func(uint8_t c) static int8_t sendchar_func(uint8_t c)
{ {
sendchar(c); // LUFA
xmit(c); // SUART xmit(c); // SUART
sendchar(c); // LUFA
return 0; return 0;
} }
@ -63,7 +63,7 @@ int main(void)
USB_USBTask(); USB_USBTask();
#endif #endif
} }
print("USB configured.\n"); print("\nUSB init\n");
rn42_init(); rn42_init();
rn42_task_init(); rn42_task_init();
@ -82,10 +82,19 @@ int main(void)
sleep_led_init(); sleep_led_init();
#endif #endif
print("Keyboard start.\n"); print("Keyboard start\n");
while (1) { while (1) {
while (USB_DeviceState == DEVICE_STATE_Suspended) { while (rn42_rts() && // RN42 is off
suspend_power_down(WDTO_120MS); USB_DeviceState == DEVICE_STATE_Suspended) {
print("[s]");
matrix_power_down();
suspend_power_down();
suspend_power_down();
suspend_power_down();
suspend_power_down();
suspend_power_down();
suspend_power_down();
suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup(); USB_Device_SendRemoteWakeup();
} }

31
keyboard/hhkb_rn42/rn42/rn42.c → keyboard/hhkb/rn42/rn42.c
View file

@ -4,6 +4,7 @@
#include "serial.h" #include "serial.h"
#include "rn42.h" #include "rn42.h"
#include "print.h" #include "print.h"
#include "timer.h"
#include "wait.h" #include "wait.h"
@ -47,11 +48,39 @@ void rn42_init(void)
serial_init(); serial_init();
} }
int16_t rn42_getc(void)
{
return serial_recv2();
}
const char *rn42_gets(uint16_t timeout)
{
static char s[24];
uint16_t t = timer_read();
uint8_t i = 0;
int16_t c;
while (i < 23 && timer_elapsed(t) < timeout) {
if ((c = rn42_getc()) != -1) {
if ((char)c == '\r') continue;
if ((char)c == '\n') break;
s[i++] = c;
}
}
s[i] = '\0';
return s;
}
void rn42_putc(uint8_t c) void rn42_putc(uint8_t c)
{ {
serial_send(c); serial_send(c);
} }
void rn42_puts(char *s)
{
while (*s)
serial_send(*s++);
}
bool rn42_autoconnecting(void) bool rn42_autoconnecting(void)
{ {
// GPIO6 for control connection(high: auto connect, low: disconnect) // GPIO6 for control connection(high: auto connect, low: disconnect)
@ -97,7 +126,7 @@ bool rn42_linked(void)
// Hi-Z: Not powered // Hi-Z: Not powered
// High: Linked // High: Linked
// Low: Connecting // Low: Connecting
return !rn42_rts() && PINF&(1<<6); return PINF&(1<<6);
} }

3
keyboard/hhkb_rn42/rn42/rn42.h → keyboard/hhkb/rn42/rn42.h
View file

@ -7,7 +7,10 @@ host_driver_t rn42_driver;
host_driver_t rn42_config_driver; host_driver_t rn42_config_driver;
void rn42_init(void); void rn42_init(void);
int16_t rn42_getc(void);
const char *rn42_gets(uint16_t timeout);
void rn42_putc(uint8_t c); void rn42_putc(uint8_t c);
void rn42_puts(char *s);
bool rn42_autoconnecting(void); bool rn42_autoconnecting(void);
void rn42_autoconnect(void); void rn42_autoconnect(void);
void rn42_disconnect(void); void rn42_disconnect(void);

478
keyboard/hhkb/rn42/rn42_task.c Normal file
View file

@ -0,0 +1,478 @@
#include <stdint.h>
#include <string.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include "keycode.h"
#include "serial.h"
#include "host.h"
#include "action.h"
#include "action_util.h"
#include "lufa.h"
#include "rn42_task.h"
#include "print.h"
#include "debug.h"
#include "timer.h"
#include "wait.h"
#include "command.h"
#include "battery.h"
static bool config_mode = false;
static bool force_usb = false;
static void status_led(bool on)
{
if (on) {
DDRE |= (1<<6);
PORTE &= ~(1<<6);
} else {
DDRE |= (1<<6);
PORTE |= (1<<6);
}
}
void rn42_task_init(void)
{
battery_init();
}
void rn42_task(void)
{
int16_t c;
// Raw mode: interpret output report of LED state
while ((c = rn42_getc()) != -1) {
// LED Out report: 0xFE, 0x02, 0x01, <leds>
// To get the report over UART set bit3 with SH, command.
static enum {LED_INIT, LED_FE, LED_02, LED_01} state = LED_INIT;
switch (state) {
case LED_INIT:
if (c == 0xFE) state = LED_FE;
else {
if (0x0 <= c && c <= 0x7f) xprintf("%c", c);
else xprintf(" %02X", c);
}
break;
case LED_FE:
if (c == 0x02) state = LED_02;
else state = LED_INIT;
break;
case LED_02:
if (c == 0x01) state = LED_01;
else state = LED_INIT;
break;
case LED_01:
dprintf("LED status: %02X\n", c);
rn42_set_leds(c);
state = LED_INIT;
break;
default:
state = LED_INIT;
}
}
/* Bluetooth mode when ready */
if (!config_mode && !force_usb) {
if (!rn42_rts() && host_get_driver() != &rn42_driver) {
clear_keyboard();
host_set_driver(&rn42_driver);
} else if (rn42_rts() && host_get_driver() != &lufa_driver) {
clear_keyboard();
host_set_driver(&lufa_driver);
}
}
static uint16_t prev_timer = 0;
uint16_t e = timer_elapsed(prev_timer);
if (e > 1000) {
/* every second */
prev_timer += e/1000*1000;
/* Low voltage alert */
uint8_t bs = battery_status();
if (bs == LOW_VOLTAGE) {
battery_led(LED_ON);
} else {
battery_led(LED_CHARGER);
}
/* every minute */
uint32_t t = timer_read32()/1000;
if (t%60 == 0) {
uint16_t v = battery_voltage();
uint8_t h = t/3600;
uint8_t m = t%3600/60;
uint8_t s = t%60;
dprintf("%02u:%02u:%02u\t%umV\n", h, m, s, v);
/* TODO: xprintf doesn't work for this.
xprintf("%02u:%02u:%02u\t%umV\n", (t/3600), (t%3600/60), (t%60), v);
*/
}
}
/* Connection monitor */
if (!rn42_rts() && rn42_linked()) {
status_led(true);
} else {
status_led(false);
}
}
/******************************************************************************
* Command
******************************************************************************/
static host_driver_t *prev_driver = &rn42_driver;
static void print_rn42(void)
{
int16_t c;
while ((c = rn42_getc()) != -1) {
xprintf("%c", c);
}
}
static void clear_rn42(void)
{
while (rn42_getc() != -1) ;
}
#define SEND_STR(str) send_str(PSTR(str))
#define SEND_COMMAND(cmd) send_command(PSTR(cmd))
static void send_str(const char *str)
{
uint8_t c;
while ((c = pgm_read_byte(str++)))
rn42_putc(c);
}
static const char *send_command(const char *cmd)
{
static const char *s;
send_str(cmd);
wait_ms(500);
s = rn42_gets(100);
xprintf("%s\r\n", s);
print_rn42();
return s;
}
static void enter_command_mode(void)
{
prev_driver = host_get_driver();
clear_keyboard();
host_set_driver(&rn42_config_driver); // null driver; not to send a key to host
rn42_disconnect();
while (rn42_linked()) ;
print("Entering config mode ...\n");
wait_ms(1100); // need 1 sec
SEND_COMMAND("$$$");
wait_ms(600); // need 1 sec
print_rn42();
const char *s = SEND_COMMAND("v\r\n");
if (strncmp("v", s, 1) != 0) SEND_COMMAND("+\r\n"); // local echo on
}
static void exit_command_mode(void)
{
print("Exiting config mode ...\n");
SEND_COMMAND("---\r\n"); // exit
rn42_autoconnect();
clear_keyboard();
host_set_driver(prev_driver);
}
static void init_rn42(void)
{
// RN-42 configure
if (!config_mode) enter_command_mode();
SEND_COMMAND("SF,1\r\n"); // factory defaults
SEND_COMMAND("S-,TmkBT\r\n");
SEND_COMMAND("SS,Keyboard/Mouse\r\n");
SEND_COMMAND("SM,4\r\n"); // auto connect(DTR)
SEND_COMMAND("SW,8000\r\n"); // Sniff disable
SEND_COMMAND("S~,6\r\n"); // HID profile
SEND_COMMAND("SH,003C\r\n"); // combo device, out-report, 4-reconnect
SEND_COMMAND("SY,FFF4\r\n"); // transmit power -12
SEND_COMMAND("R,1\r\n");
if (!config_mode) exit_command_mode();
}
#if 0
// Switching connections
// NOTE: Remote Address doesn't work in the way manual says.
// EEPROM address for link store
#define RN42_LINK0 (uint8_t *)128
#define RN42_LINK1 (uint8_t *)140
#define RN42_LINK2 (uint8_t *)152
#define RN42_LINK3 (uint8_t *)164
static void store_link(uint8_t *eeaddr)
{
enter_command_mode();
SEND_STR("GR\r\n"); // remote address
const char *s = rn42_gets(500);
if (strcmp("GR", s) == 0) s = rn42_gets(500); // ignore local echo
xprintf("%s(%d)\r\n", s, strlen(s));
if (strlen(s) == 12) {
for (int i = 0; i < 12; i++) {
eeprom_write_byte(eeaddr+i, *(s+i));
dprintf("%c ", *(s+i));
}
dprint("\r\n");
}
exit_command_mode();
}
static void restore_link(const uint8_t *eeaddr)
{
enter_command_mode();
SEND_COMMAND("SR,Z\r\n"); // remove remote address
SEND_STR("SR,"); // set remote address from EEPROM
for (int i = 0; i < 12; i++) {
uint8_t c = eeprom_read_byte(eeaddr+i);
rn42_putc(c);
dprintf("%c ", c);
}
dprintf("\r\n");
SEND_COMMAND("\r\n");
SEND_COMMAND("R,1\r\n"); // reboot
exit_command_mode();
}
static const char *get_link(uint8_t * eeaddr)
{
static char s[13];
for (int i = 0; i < 12; i++) {
uint8_t c = eeprom_read_byte(eeaddr+i);
s[i] = c;
}
s[12] = '\0';
return s;
}
#endif
static void pairing(void)
{
enter_command_mode();
SEND_COMMAND("SR,Z\r\n"); // remove remote address
SEND_COMMAND("R,1\r\n"); // reboot
exit_command_mode();
}
bool command_extra(uint8_t code)
{
uint32_t t;
uint16_t b;
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
print("\n\n----- Bluetooth RN-42 Help -----\n");
print("i: RN-42 info\n");
print("b: battery voltage\n");
print("Del: enter/exit RN-42 config mode\n");
print("Slck: RN-42 initialize\n");
#if 0
print("1-4: restore link\n");
print("F1-F4: store link\n");
#endif
print("p: pairing\n");
if (config_mode) {
return true;
} else {
print("u: toggle Force USB mode\n");
return false; // to display default command help
}
case KC_P:
pairing();
return true;
#if 0
/* Store link address to EEPROM */
case KC_F1:
store_link(RN42_LINK0);
return true;
case KC_F2:
store_link(RN42_LINK1);
return true;
case KC_F3:
store_link(RN42_LINK2);
return true;
case KC_F4:
store_link(RN42_LINK3);
return true;
/* Restore link address to EEPROM */
case KC_1:
restore_link(RN42_LINK0);
return true;
case KC_2:
restore_link(RN42_LINK1);
return true;
case KC_3:
restore_link(RN42_LINK2);
return true;
case KC_4:
restore_link(RN42_LINK3);
return true;
#endif
case KC_I:
print("\n----- RN-42 info -----\n");
xprintf("protocol: %s\n", (host_get_driver() == &rn42_driver) ? "RN-42" : "LUFA");
xprintf("force_usb: %X\n", force_usb);
xprintf("rn42: %s\n", rn42_rts() ? "OFF" : (rn42_linked() ? "CONN" : "ON"));
xprintf("rn42_autoconnecting(): %X\n", rn42_autoconnecting());
xprintf("config_mode: %X\n", config_mode);
xprintf("USB State: %s\n",
(USB_DeviceState == DEVICE_STATE_Unattached) ? "Unattached" :
(USB_DeviceState == DEVICE_STATE_Powered) ? "Powered" :
(USB_DeviceState == DEVICE_STATE_Default) ? "Default" :
(USB_DeviceState == DEVICE_STATE_Addressed) ? "Addressed" :
(USB_DeviceState == DEVICE_STATE_Configured) ? "Configured" :
(USB_DeviceState == DEVICE_STATE_Suspended) ? "Suspended" : "?");
xprintf("battery: ");
switch (battery_status()) {
case FULL_CHARGED: xprintf("FULL"); break;
case CHARGING: xprintf("CHARG"); break;
case DISCHARGING: xprintf("DISCHG"); break;
case LOW_VOLTAGE: xprintf("LOW"); break;
default: xprintf("?"); break;
};
xprintf("\n");
xprintf("RemoteWakeupEnabled: %X\n", USB_Device_RemoteWakeupEnabled);
xprintf("VBUS: %X\n", USBSTA&(1<<VBUS));
t = timer_read32()/1000;
uint8_t d = t/3600/24;
uint8_t h = t/3600;
uint8_t m = t%3600/60;
uint8_t s = t%60;
xprintf("uptime: %02u %02u:%02u:%02u\n", d, h, m, s);
#if 0
xprintf("LINK0: %s\r\n", get_link(RN42_LINK0));
xprintf("LINK1: %s\r\n", get_link(RN42_LINK1));
xprintf("LINK2: %s\r\n", get_link(RN42_LINK2));
xprintf("LINK3: %s\r\n", get_link(RN42_LINK3));
#endif
return true;
case KC_B:
// battery monitor
t = timer_read32()/1000;
b = battery_voltage();
xprintf("BAT: %umV\t", b);
xprintf("%02u:", t/3600);
xprintf("%02u:", t%3600/60);
xprintf("%02u\n", t%60);
return true;
case KC_U:
if (config_mode) return false;
if (force_usb) {
print("Auto mode\n");
force_usb = false;
} else {
print("USB mode\n");
force_usb = true;
clear_keyboard();
host_set_driver(&lufa_driver);
}
return true;
case KC_DELETE:
/* RN-42 Command mode */
if (rn42_autoconnecting()) {
enter_command_mode();
command_state = CONSOLE;
config_mode = true;
} else {
exit_command_mode();
command_state = ONESHOT;
config_mode = false;
}
return true;
case KC_SCROLLLOCK:
init_rn42();
return true;
default:
if (config_mode)
return true;
else
return false; // yield to default command
}
return true;
}
/*
* RN-42 Command mode
* sends charactors to the module
*/
static uint8_t code2asc(uint8_t code);
bool command_console_extra(uint8_t code)
{
rn42_putc(code2asc(code));
return true;
}
// convert keycode into ascii charactor
static uint8_t code2asc(uint8_t code)
{
bool shifted = (get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))) ? true : false;
switch (code) {
case KC_A: return (shifted ? 'A' : 'a');
case KC_B: return (shifted ? 'B' : 'b');
case KC_C: return (shifted ? 'C' : 'c');
case KC_D: return (shifted ? 'D' : 'd');
case KC_E: return (shifted ? 'E' : 'e');
case KC_F: return (shifted ? 'F' : 'f');
case KC_G: return (shifted ? 'G' : 'g');
case KC_H: return (shifted ? 'H' : 'h');
case KC_I: return (shifted ? 'I' : 'i');
case KC_J: return (shifted ? 'J' : 'j');
case KC_K: return (shifted ? 'K' : 'k');
case KC_L: return (shifted ? 'L' : 'l');
case KC_M: return (shifted ? 'M' : 'm');
case KC_N: return (shifted ? 'N' : 'n');
case KC_O: return (shifted ? 'O' : 'o');
case KC_P: return (shifted ? 'P' : 'p');
case KC_Q: return (shifted ? 'Q' : 'q');
case KC_R: return (shifted ? 'R' : 'r');
case KC_S: return (shifted ? 'S' : 's');
case KC_T: return (shifted ? 'T' : 't');
case KC_U: return (shifted ? 'U' : 'u');
case KC_V: return (shifted ? 'V' : 'v');
case KC_W: return (shifted ? 'W' : 'w');
case KC_X: return (shifted ? 'X' : 'x');
case KC_Y: return (shifted ? 'Y' : 'y');
case KC_Z: return (shifted ? 'Z' : 'z');
case KC_1: return (shifted ? '!' : '1');
case KC_2: return (shifted ? '@' : '2');
case KC_3: return (shifted ? '#' : '3');
case KC_4: return (shifted ? '$' : '4');
case KC_5: return (shifted ? '%' : '5');
case KC_6: return (shifted ? '^' : '6');
case KC_7: return (shifted ? '&' : '7');
case KC_8: return (shifted ? '*' : '8');
case KC_9: return (shifted ? '(' : '9');
case KC_0: return (shifted ? ')' : '0');
case KC_ENTER: return '\n';
case KC_ESCAPE: return 0x1B;
case KC_BSPACE: return '\b';
case KC_TAB: return '\t';
case KC_SPACE: return ' ';
case KC_MINUS: return (shifted ? '_' : '-');
case KC_EQUAL: return (shifted ? '+' : '=');
case KC_LBRACKET: return (shifted ? '{' : '[');
case KC_RBRACKET: return (shifted ? '}' : ']');
case KC_BSLASH: return (shifted ? '|' : '\\');
case KC_NONUS_HASH: return (shifted ? '|' : '\\');
case KC_SCOLON: return (shifted ? ':' : ';');
case KC_QUOTE: return (shifted ? '"' : '\'');
case KC_GRAVE: return (shifted ? '~' : '`');
case KC_COMMA: return (shifted ? '<' : ',');
case KC_DOT: return (shifted ? '>' : '.');
case KC_SLASH: return (shifted ? '?' : '/');
case KC_DELETE: return '\0'; // Delete to disconnect
default: return ' ';
}
}

0
keyboard/hhkb_rn42/rn42/rn42_task.h → keyboard/hhkb/rn42/rn42_task.h
View file

0
keyboard/hhkb_rn42/rn42/suart.S → keyboard/hhkb/rn42/suart.S
View file

0
keyboard/hhkb_rn42/rn42/suart.h → keyboard/hhkb/rn42/suart.h
View file

523
keyboard/hhkb_rn42/MEMO.txt
View file

@ -1,523 +0,0 @@
Roving RN-42
============
Bug:
- with Nexus5 keyboard and mouse are very laggy.
- lose USB connection during power-down mode
- USB initialize code in main() causes this - WRONG
- Do not power-down during USB connection is active - DONE 11/11
(USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection
matrix_power_down() matrix.c - 11/23
Todo:
Design:
- remove MCU dependent power saving code from core/keyboard
- it should be located in project matrix.c - DONE 11/23
- HHKB matrix.c needs matrix_prev?
- is_modified() is obsolete now. really needs?
LUFA:
USB connection check: state of USB deivce
- USB_DeviceState:
USB_Deivce_State_t { Unattached, Powered, Default, Addressed, Configured*, Suspended* }
- USB_IsInitialized: state of LUFA core setup
becomes true in USB_Init() USBController_AVR8.c
becomes false in USB_Disable() USBController_AVR8.c
- USB_VBUS_GetStatus(): state of VBUS(power/connection)
- USB_Disable() detaches, disables all interrupts, controller, PLL, regulater.
Power saving:
- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition
- 8MHz clock
- When not connected in a few minutes get into deep sleep to save battery life
- CTS is needed for waking up from deep sleep? How deep sleep is activated?
- firmware controlled 3.3V DC converter to switch on/off BT module
- sleep MCU and BT module(keyboard is not used)
- deep sleep MCU and BT module(keyboard is not used for long time)
- deep sleep MCU and turn off BT module(keyboard is not used and not connected)
- Battery ADC; switching, high resistance
- switching gnd end of divider with PF4
- high resistor 100K/1M?
capacitor 10nF
http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/
- During USB suspend change clock source to internal RC from external Xtal(6.8)
- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3)
- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13)
Improving:
- BT LED; connecting, linked, sleeping, deep sleeping
- Battry LED; blink(using timer?)
- move rn42 to protocol directory when it becomes reusable stack
- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
- ADC resolution
AVR120
AVR32138
Testing:
- Factroy reset doesn't work; need to **test again** 10K pull-up is too high?
- Lipo voltage ADC value is not stabilized
- DCDC converter: squeaky inducter; try other inductors
- Keymap layer bug: during space is pressed(mousekey) press Fn(HHKB) then release space before Fn, in result HHKB layer is locked(toggled) unintentionally.
Done:
- low battery alert(solid light) 09/04
Power routing
-------------
Current:
(USB) +---(Lipo)
| | |
| | +------+ DPDT
| | |Switch/-----------------------+
| | +------+ |
| +-------+ | |
+-|Charger| | |
| +-------+ | +---+ |
| | |MCU| |
| | +---+ |
| | | |
| | | |
+--------------+ +-----+ +------+ +---/--+ +-----+
|Power Selector|--|DC 5V|--|DC3.3V|---|Switch|----|RN-42|
+--------------+ +-----+ +------+ +------+ +-----+
USB Power is boosted unnecessarily, not harmful?
Idea 1:
(USB) +---(Lipo)
| | |
| | +------+ DPDT
| | |Switch/----------+
| | +------+ |
| +-------+ | |
+-|Charger| | |
| +-------+ | +---+ |
| +-----+ |MCU| |
| |DC 5V| +---+ |
| +-----+ | |
| | | |
+--------------+ | +---/--+ +------+ +-----+
|Power Selector|-----+---|Switch|----|DC3.3V|-----|RN-42|
+--------------+ +------+ +------+ +-----+
To enable BT when USB powered it still needs to turn siwtch on, Lipo consumes quinscent current at 5V converter in vain.(Not good)
Idea 2:
(USB) +---(Lipo)
| | |
| | +------+
| | |Switch|
| | +------+
| +-------+ |
+-|Charger| |
| +-------+ | +---+
| +-----+ |MCU|----+ Controlled by firmware
| |DC 5V| +---+ | On: Lipo powered
| +-----+ | | Off: USB powered
| | | |enable
+--------------+ | +------+ +-----+
|Power Selector|-----+---|DC3.3V|-----|RN-42|
+--------------+ +------+ +-----+
MCU can controlled power of RN-42 without hardware switch.
When USB powered and switch is on Lipo consumes quinscent current at 5V converter in vain.(Not good)
Idea 3:
(USB) +---(Lipo)
| | |
| | +------+
| | |Switch|SPST(or without)
| | +------+
| +-------+ |
+-|Charger| |
| +-------+ | +---+
| | |MCU|----+ Controlled by firmware
| | +---+ | On: Lipo powered
| | | | Off: USB powered
| | | |enable
+--------------+ +-----+ +------+ +-----+
|Power Selector|-|DC 5V|-|DC3.3V|-----|RN-42|
+--------------+ +-----+ +------+ +-----+
Switch is needed to save Lipo when not used because decent power saving is not available now. If firmware can turn off BT module completely and make MCU deep sleep the switch will be not even needed.
DONE:
- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30
- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm
- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB
- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done
- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done
- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24
- LINKED: add trace on PIO2 to PF6 07.24
- Lipo voltage ADC sensing
- Lipo charger MCP73831: needs capacitor 4.7uF *2
- USB connection check - 07.01
- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01
- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01
- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
TROUBLE SHOOT
-------------
07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
07/18 On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
Lipo
----
850mA lasts around 9 hours(07/28)
Sparkfun Polymer Lithium Ion Battery 850mAh:
https://www.sparkfun.com/products/341
Lipo Cell spec:
https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf
Protection spec:
http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf
min typical max
over-charge 4.255 4.280 4.305
over-charge discover? 4.030 4.080 4.130
over-discharge 2.827 2.900 2.973
over-discharge discover 3.022 3.100 3.178
ADC voltage monitor: voltage divider 10K+10K(0.5)
ADC=V*0.5/2.56*1024
V ADC
------------------
4.20 0x347(839)
3.10 0x26b(619)
Configuration
-------------
Ver 6.15 04/26/2013
(c) Roving Networks
***Settings***
BTA=0006664B3AE3
BTName=tmkBT-3AE3
Baudrt(SW4)=115K
Mode =DTR
Authen=2
Bonded=0
Rem=000000000000
***ADVANCED Settings***
SrvName= keyboard/mouse
SrvClass=0000
DevClass=0000
InqWindw=0100
PagWindw=0100
CfgTimer=255
StatuStr=NULL
HidFlags=3c
DTRtimer=8
KeySwapr=0
***OTHER Settings***
Profile= HID
CfgChar= $
SniffEna=8010
LowPower=0
TX Power=0
IOPorts= 0
IOValues=0
Sleeptmr=0
DebugMod=0
RoleSwch=0
Serial connection
-----------------
Serial line: 115200bps, 8bit, 1-stopbit, non-parity, no flow control
SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth)
To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD')
To exit type '---'(you will see 'END') and '+' to get local echo.
Setting command mode
--------------------
S-,tmkBT // Device name
SS,keyboard/mouse // service name
SM,4 // Auto Connect DTR mode
SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save
S~,6 // HID profile
SH,003C // HID register
SY,0004 // Transmit power
Other options:
SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc)
SD,05C0 // bit 12-8 7 6 5-0
// 00101 1 1 0
// peripheral pointing keybaord joystick, gamepad, ...
SM,6 // Pairing mode: auto connect
SM,4 // Master mode: Connection can be controled with GPIO6
HID profile
-----------
S~,6 HID profile
S~,0 SPP profile
R,1 reboot
Apple iOS
---------
Keyboard can be used with iPhone, but mouse cannot.
To operate iOS with keyboard is not so useful, though.
There may be iOS specific scancodes?
HID flag register
-----------------
SH,0200
GH
10 0000 0000(0200) default
00 0011 1000(0038) Combo
|| | | |\_\____ number of paired devices to which the module can reconnect
|| | | \_______ send out reports over UART (0xFF <len> <data>)
|| \__\_________ descriptor type
|\______________ toggle virtual keyboard on iOS when first connected
\_______________ Force HID mode if GPIO11 is high on power-up
Descriptor type:
0000: keybaord
0001: Game Pad
0010: Mouse
0011: Combo
0100: Joystick
1xxx: reserved
Out report - Indicator
----------------------
0xFE 0x02 0x01 <LED_state>
LED Status
----------
Configuring 10 times per sec
Startup/configuration timer 2 times per sec
Discoverable/Inquiring/Idle once per sec
Connected solid on
Pairing
-------
First, host initiates pairing process and once it is done, auto connect will work thereafter.
SM,3 Master mode
SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR)
confirm: auto connect works and control connection with GPIO6
SM,5 Auto Connect ANY Mode (Mode =ANY)
each time GPIO is set, make inquiry and connect to the first found device
SM,6 automatically reconnect(Mode =Pair)
confirm: auto connect works well but difficult to enter command mode.
SR,Z removes all remote addresses for reconnecting.
can be used to connect another host
SR,I registers last inquiry address
Fast data mode
--------------
The module enters fast data mode after 'remote configuration timer' window is passed from power on.
In this mode the module does not accept '$$$' to enter command mode.
Power Management
----------------
Inquiry and Page window Idle or Active (3.1.1)
Downside: delay in discovery or connection time
SI, // set inquiry scan window(discovery) on/off duty?
SJ, // set page scan window(connection)
This reduces averaege power >20mA to 5mA(3mA in Sniff mode)
Sniff mode Transmit
Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA)
In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA)
SW,<val> // set interval timer(*0.625ms) 0000-7FFF
Deep sleep Idle (3.1.2)
In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer.
SW,8320 // deep sleep enable(interval=0x320*0.625=500ms)
In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second.
To wake from deep sleep there are three ways: (in worst case wake up takes 5ms)
*send a charactor to the UART(first charactor will be lost)
*toggle CTS low to high and wait 5ms
*wake automatically every slot time(<val>*0.625ms)
Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again.
Downside: latency and data loss
Disable Output driver Idle or Active (3.1.3)
S%,1000 // set all GPIO pins(0-11) to inputs.
Lower Transmit Power Idle or Active (3.1.4)
SY,<hex> // transmit power setting(takes effect after a power cycle and reboot)
Downside: reducing effective range
Optimizig for Latency
---------------------
By default the firmware is optimized for throughput.
SQ,16 // set latency bit
SQ,0 // unset latency bit
Configuration timer settings
----------------------------
Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?).
The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.)
ST,0 // no remote, no local when connected
ST,<1-252> // local and remote with timeout in seconds from power up
ST,253 // local only without timeout
ST,254 // remote only without timeout
ST,255 // local and remote without timeout
Android
-------
3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds.
Commands
--------
SC,
SM,<val>
SD,
SP,<string> Pin code(alpahnumeric)
SQ,<mask> Special configuration(GPIO, discovery mode, low latency, reboot, UART)
SR,<hex> Store remote address
SR,Z Erase all address
SS,<string> Set service name(1-20)**
ST,<val> Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer)
SU,<val> UART baud rate
SW,<val> low-power sniff mode** deep sleep and wake up every 625us * <val>
SX,<0|1> bonding enable only acceps device that matches the stored address
SY,<hex> power setting**
SZ,<val> non-standard raw baud rate <val>=baud*0.004096
S~,<val> Profile 0:SPP, 5:APL, 6:HID
S-,<string> Device name -15 alphanumeric charactors
S?,<0|1> role switch enable
S$,<char> command mode char
$|,<hex> low-power connect mode deep sleep/active(discoverable and connectable) cycle
D display basic setting
E display extended setting
GB display the device's Bluetooth address
GF display Bluetooth address of connected device
GK show connection status
GR show remote address for reconnecting
G& show GPIO pin
G<char> show stored setting
+ toggle local echo on/off
& show GPIO 3,4,6,7(DIP switch)
C connect to stored remote address
C,<address> connect last address
CFI connect and go into fast data mode
CFR connect and go into fast data mode
CT,<address>,<val> connect to the address and disconnect after val?
F,1 fast data mod:
H display help
I,<time>,<cod> inquiry scan with <cod>
IN
IQ scan
IS inquiry scan with 001F00
J hide pin code
K, kill disconnects current connection
L link quality
M show modem signlal status
O display other settings
P,<car> pass through?
Q quiet mode make the module not discoverable
Q,0 discoverable and connectable
Q,1 not discoverable and not connectable
Q,2 not discoverable and connectable
Q,? display current quiet mode
R,1 reboot
T,<0|1> pass received data while in command mode
U,<baud>,<parity> change UART setting tentatively
V display firmware version
W wake from quiet mode enable discovery and connection
Z deep sleep mode(<2mA)
help
----
*** SET COMMANDS ***
SA,<3,0> - Authentication
SC,<hex> - Service Class
SD,<hex> - Device Class
SE,<1-16> - UUID
SF,1 - Factory Defaults
SH,<hex> - HID flags
SI,<hex> - Inquiry Scan Window
SJ,<hex> - Page Scan Window
SL,<E,O,N> - Parity
SM,<0-5> - Mode (0=slav,1=mstr,2=trig,3=auto,4=DTR,5=Any)
SN,<name> - Name
SO,<text> - conn/discon Status
SP,<text> - Pin Code
SR,<adr> - Remote Address
SS,<text> - Service Name
ST,<num> - Config Timer
SU,<rate> - Baudrate
SW,<hex> - Sniff Rate
SX,<1,0> - Bonding
SY,<hex> - TX power
SZ,<num> - Raw Baudrate
S~,<0-6> - Profile (0=SPP,1=DCE,2=DTE,3=MDM,4=D&S,6=HID
S?,<0-1> - role switch
S$,<char> - CMD mode char
S@,<hex> - io port dir
S&,<hex> - io port val
S%,<hex> - io boot dir
S^,<hex> - io boot val
S*,<hex> - pio(8-11) set
S|,<hex> - low power timers
S+,<num> - DTR timer
S=,<hex> - Key mapper
S:,<num> - sleep timer
*** DISPLAY ***
D - Basic Settings
E - Extended Settings
G<X> - Stored setting
GB - BT Address
GF - BT Address of Last Connection
GK - Connect Status
G& - I/O Ports
V - Firmare version
*** OTHER ***
C,<adr> - Connect
F,1 - Fast Mode
I,<time>,<cod> - Device Scan Inquiry
J - Hide Pin Code
K, - Kill (disconnect)
L, - toggle local echo
P,<text> - Pass Thru
Q - Quiet (no discovery)
R,1 - Reboot
T,<0,1> - send data in CMD mode
U,<rate>,<E,O,N> - Temp Uart Change
Z - low power sleep
& - Read switches

164
keyboard/hhkb_rn42/hhkb_avr.h
View file

@ -1,164 +0,0 @@
#ifndef HHKB_AVR_H
#define HHKB_AVR_H
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
// Timer resolution check
#if (1000000/TIMER_RAW_FREQ > 20)
# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
#endif
/*
* HHKB Matrix I/O
*
* row: HC4051[A,B,C] selects scan row0-7
* row-ext: [En0,En1] row extention for JP
* col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
* key: on: 0/off: 1
* prev: hysteresis control: assert(1) when previous key state is on
*/
#if defined(__AVR_ATmega32U4__)
/*
* For TMK HHKB alt controller(ATMega32U4)
*
* row: PB0-2
* col: PB3-5,6
* key: PD7(pull-uped)
* prev: PB7
* power: PD4(L:off/H:on)
* row-ext: PC6,7 for HHKB JP(active low)
*/
static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); }
static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
#ifdef HHKB_POWER_SAVING
static inline void KEY_POWER_ON(void) {
DDRB = 0xFF; PORTB = 0x40; // change pins output
DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
/* Without this wait you will miss or get false key events. */
_delay_ms(5); // wait for powering up
}
static inline void KEY_POWER_OFF(void) {
/* input with pull-up consumes less than without it when pin is open. */
DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
}
#else
static inline void KEY_POWER_ON(void) {}
static inline void KEY_POWER_OFF(void) {}
#endif
static inline void KEY_INIT(void)
{
/* row,col,prev: output */
DDRB = 0xFF;
PORTB = 0x40; // unable
/* key: input with pull-up */
DDRD &= ~0x80;
PORTD |= 0x80;
#ifdef HHKB_JP
/* row extention for HHKB JP */
DDRC |= (1<<6|1<<7);
PORTC |= (1<<6|1<<7);
#endif
KEY_UNABLE();
KEY_PREV_OFF();
KEY_POWER_ON();
}
static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
{
PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07);
#ifdef HHKB_JP
if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6);
else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7);
#endif
}
#elif defined(__AVR_AT90USB1286__)
/*
* For Teensy++(AT90USB1286)
*
* HHKB pro HHKB pro2
* row: PB0-2 (6-8) (5-7)
* col: PB3-5,6 (9-12) (8-11)
* key: PE6(pull-uped) (4) (3)
* prev: PE7 (5) (4)
*
* TODO: convert into 'staitc inline' function
*/
#define KEY_INIT() do { \
DDRB |= 0x7F; \
DDRE |= (1<<7); \
DDRE &= ~(1<<6); \
PORTE |= (1<<6); \
} while (0)
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
(((COL) & 0x07)<<3) | \
((ROW) & 0x07))
#define KEY_ENABLE() (PORTB &= ~(1<<6))
#define KEY_UNABLE() (PORTB |= (1<<6))
#define KEY_STATE() (PINE & (1<<6))
#define KEY_PREV_ON() (PORTE |= (1<<7))
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
#else
# error "define code for matrix scan"
#endif
#if 0
// For ATMega328P with V-USB
//
// #elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key: PB0(pull-uped)
// prev: PB1
// row: PB2-4
// col: PC0-2,3
// power: PB5(Low:on/Hi-z:off)
#define KEY_INIT() do { \
DDRB |= 0x3E; \
DDRB &= ~(1<<0); \
PORTB |= 1<<0; \
DDRC |= 0x0F; \
KEY_UNABLE(); \
KEY_PREV_OFF(); \
} while (0)
#define KEY_SELECT(ROW, COL) do { \
PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
} while (0)
#define KEY_ENABLE() (PORTC &= ~(1<<3))
#define KEY_UNABLE() (PORTC |= (1<<3))
#define KEY_STATE() (PINB & (1<<0))
#define KEY_PREV_ON() (PORTB |= (1<<1))
#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
// Power supply switching
#define KEY_POWER_ON() do { \
KEY_INIT(); \
PORTB &= ~(1<<5); \
_delay_ms(1); \
} while (0)
#define KEY_POWER_OFF() do { \
DDRB &= ~0x3F; \
PORTB &= ~0x3F; \
DDRC &= ~0x0F; \
PORTC &= ~0x0F; \
} while (0)
#endif
#endif

84
keyboard/hhkb_rn42/keymap_common.h
View file

@ -1,84 +0,0 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include <stdint.h>
#include <stdbool.h>
#include "keycode.h"
#include "action.h"
#include "action_code.h"
#include "action_layer.h"
#include "action_macro.h"
#include "action_util.h"
#include "report.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#include "keymap.h"
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
#define KEYMAP( \
K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
K35, K36, K37, K57, K56 \
) \
{ \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \
}
#define KEYMAP_JP( \
K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \
K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \
K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \
K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \
K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \
) \
{ \
{ KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \
{ KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
{ KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
{ KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \
{ KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
{ KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \
{ KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \
{ KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \
{ KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \
{ KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \
{ KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \
{ KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \
{ KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \
{ KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \
}
#endif

282
keyboard/hhkb_rn42/keymap_hasu.c
View file

@ -1,282 +0,0 @@
/*
* Hasu: my personal keymap
*/
#include "keymap_common.h"
#ifdef KEYMAP_SECTION_ENABLE
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
#endif
/* Layer 0: Default Layer
* ,-----------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
* |-----------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
* |-----------------------------------------------------------|
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 |
* |-----------------------------------------------------------|
* |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1|
* `-----------------------------------------------------------'
* |Gui|Alt | Fn4 |Fn5 |Gui|
* `-------------------------------------------'
*/
[0] = \
KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \
FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
LGUI,LALT, FN4, FN5, RGUI),
/* Layer 1: HHKB mode[HHKB Fn]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
* |-----------------------------------------------------------|
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
* |-----------------------------------------------------------|
* |Shift | | | | | | +| -|End|PgD|Dow|Shift | |
* `-----------------------------------------------------------'
* |Gui|Alt | Space |Alt |Gui|
* `-------------------------------------------'
*/
[1] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \
LGUI,LALT, SPC, RALT,RGUI),
/* Layer 2: Vi mode[Slash]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
* |-----------------------------------------------------------|
* |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
* |-----------------------------------------------------------|
* |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | |
* `-----------------------------------------------------------'
* |Gui|Alt | Space |Alt |Gui|
* `-------------------------------------------'
*/
[2] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \
LGUI,LALT, SPC, RALT,RGUI),
/* Layer 3: Mouse mode(IJKL)[Semicolon]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
* |-----------------------------------------------------------|
* |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
* |-----------------------------------------------------------|
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
*/
[3] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, LEFT,WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
LGUI,LALT, BTN1, TRNS,TRNS),
/* Layer 5: Mouse mode(IJKL)[Space]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
* |-----------------------------------------------------------|
* |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
* |-----------------------------------------------------------|
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
*/
[4] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, LEFT,WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
LGUI,LALT, TRNS, TRNS,TRNS),
#if 0
/* Layer 3: Mouse mode(HJKL)[Semicolon]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs|
* |-----------------------------------------------------------|
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
* |-----------------------------------------------------------|
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Alt |Fn0|
* `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
TAB, NO, NO, NO, NO, NO, LEFT,WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \
LGUI,LALT, BTN1, RALT,TRNS),
/* Layer4: Mouse mode(HJKL)[Space]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T|
* |-----------------------------------------------------------|
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
* |-----------------------------------------------------------|
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt | Fn0 |Alt |Fn0|
* `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
FN8, NO, NO, NO, NO, NO, LEFT,WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
LGUI,LALT, TRNS, RALT,RGUI),
#endif
#if 0
/* Layer x: Matias half-qwerty keyboard style[Space]
* ,-----------------------------------------------------------.
* | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc|
* |-----------------------------------------------------------|
* |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab |
* |-----------------------------------------------------------|
* |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control |
* |-----------------------------------------------------------|
* |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt | Fn0 |Alt |Gui|
* `--------------------------------------------'
*/
KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \
BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \
LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \
LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \
LGUI,LALT, TRNS, RALT,RGUI),
#endif
};
/* id for user defined functions */
enum function_id {
LSHIFT_LPAREN,
};
enum macro_id {
HELLO,
VOLUP,
ALT_TAB,
};
/*
* Fn action definition
*/
#ifdef KEYMAP_SECTION_ENABLE
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
#else
const uint16_t fn_actions[] PROGMEM = {
#endif
[0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used)
[1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps)
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
[5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL)
[6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
[8] = ACTION_MACRO(ALT_TAB), // Application switching
[9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
[10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc
// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '('
// [x] = ACTION_MACRO(HELLO), // Macro: say hello
// [x] = ACTION_MACRO(VOLUP), // Macro: media key
};
/*
* Macro definition
*/
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch (id) {
case HELLO:
return (record->event.pressed ?
MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) :
MACRO_NONE );
case VOLUP:
return (record->event.pressed ?
MACRO( D(VOLU), U(VOLU), END ) :
MACRO_NONE );
case ALT_TAB:
return (record->event.pressed ?
MACRO( D(LALT), D(TAB), END ) :
MACRO( U(TAB), END ));
}
return MACRO_NONE;
}
/*
* user defined action function
*/
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
if (record->event.pressed) dprint("P"); else dprint("R");
dprintf("%d", record->tap.count);
if (record->tap.interrupted) dprint("i");
dprint("\n");
switch (id) {
case LSHIFT_LPAREN:
// Shift parentheses example: LShft + tap '('
// http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses
// http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899
if (record->event.pressed) {
if (record->tap.count > 0 && !record->tap.interrupted) {
if (record->tap.interrupted) {
dprint("tap interrupted\n");
register_mods(MOD_BIT(KC_LSHIFT));
}
} else {
register_mods(MOD_BIT(KC_LSHIFT));
}
} else {
if (record->tap.count > 0 && !(record->tap.interrupted)) {
add_weak_mods(MOD_BIT(KC_LSHIFT));
send_keyboard_report();
register_code(KC_9);
unregister_code(KC_9);
del_weak_mods(MOD_BIT(KC_LSHIFT));
send_keyboard_report();
record->tap.count = 0; // ad hoc: cancel tap
} else {
unregister_mods(MOD_BIT(KC_LSHIFT));
}
}
break;
}
}

50
keyboard/hhkb_rn42/keymap_jp.c
View file

@ -1,50 +0,0 @@
/*
* HHKB JP Layout
*/
#include "keymap_common.h"
#ifdef KEYMAP_SECTION_ENABLE
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
#endif
/* Layer 0: Default Layer */
KEYMAP_JP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, \
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS,ENT, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, UP, RSFT, \
FN0, ZKHK,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,FN0, LEFT,DOWN,RGHT),
/* Layer 1: HHKB mode (HHKB Fn)
* ,-----------------------------------------------------------.
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
* |------------------------------------------------------` |
* | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | |
* |-----------------------------------------------------------|
* | | | | | | | +| -|End|PgD|Dow| | | |
* |-----------------------------------------------------------|
* | || | | | | | | | | || | | |
* `-----------------------------------------------------------'
*/
KEYMAP_JP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, \
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS,PENT, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS),
};
/*
* Fn action definition
*/
#ifdef KEYMAP_SECTION_ENABLE
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
#else
const uint16_t fn_actions[] PROGMEM = {
#endif
[0] = ACTION_LAYER_MOMENTARY(1),
};

191
keyboard/hhkb_rn42/matrix.c
View file

@ -1,191 +0,0 @@
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "matrix.h"
#include "hhkb_avr.h"
#include <avr/wdt.h>
#include "suspend.h"
#include "lufa.h"
// matrix power saving
#define MATRIX_POWER_SAVE 10000
static uint32_t matrix_last_modified = 0;
static bool matrix_power = true;
// matrix state buffer(1:on, 0:off)
static matrix_row_t *matrix;
static matrix_row_t *matrix_prev;
static matrix_row_t _matrix0[MATRIX_ROWS];
static matrix_row_t _matrix1[MATRIX_ROWS];
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
#ifdef DEBUG
debug_enable = true;
debug_keyboard = true;
#endif
KEY_INIT();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
matrix = _matrix0;
matrix_prev = _matrix1;
}
uint8_t matrix_scan(void)
{
uint8_t *tmp;
tmp = matrix_prev;
matrix_prev = matrix;
matrix = tmp;
matrix_power_up();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
KEY_SELECT(row, col);
_delay_us(5);
// Not sure this is needed. This just emulates HHKB controller's behaviour.
if (matrix_prev[row] & (1<<col)) {
KEY_PREV_ON();
}
_delay_us(10);
// NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
// If V-USB interrupts in this section we could lose 40us or so
// and would read invalid value from KEY_STATE.
uint8_t last = TIMER_RAW;
KEY_ENABLE();
// Wait for KEY_STATE outputs its value.
// 1us was ok on one HHKB, but not worked on another.
// no wait doesn't work on Teensy++ with pro(1us works)
// no wait does work on tmk PCB(8MHz) with pro2
// 1us wait does work on both of above
// 1us wait doesn't work on tmk(16MHz)
// 5us wait does work on tmk(16MHz)
// 5us wait does work on tmk(16MHz/2)
// 5us wait does work on tmk(8MHz)
// 10us wait does work on Teensy++ with pro
// 10us wait does work on 328p+iwrap with pro
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
_delay_us(5);
if (KEY_STATE()) {
matrix[row] &= ~(1<<col);
} else {
matrix[row] |= (1<<col);
}
// Ignore if this code region execution time elapses more than 20us.
// MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us]
// MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b)
if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
matrix[row] = matrix_prev[row];
}
_delay_us(5);
KEY_PREV_OFF();
KEY_UNABLE();
// NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
// This takes 25us or more to make sure KEY_STATE returns to idle state.
_delay_us(75);
}
if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
}
matrix_power_down();
return 1;
}
bool matrix_is_modified(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
if (matrix[i] != matrix_prev[i])
return true;
}
return false;
}
inline
bool matrix_has_ghost(void)
{
return false;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & (1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 01234567\n");
for (uint8_t row = 0; row < matrix_rows(); row++) {
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
}
}
void matrix_power_up(void) {
if (matrix_power) return;
KEY_POWER_ON();
matrix_power = true;
}
void matrix_power_down(void) {
if (!matrix_power) return;
// doesn't power save while USB connection is active
if (USB_DeviceState == DEVICE_STATE_Configured) return;
if (timer_elapsed32(matrix_last_modified) <= MATRIX_POWER_SAVE) return;
KEY_POWER_OFF();
suspend_power_down(WDTO_15MS);
matrix_power = false;
}

294
keyboard/hhkb_rn42/rn42/rn42_task.c
View file

@ -1,294 +0,0 @@
#include <stdint.h>
#include "keycode.h"
#include "serial.h"
#include "host.h"
#include "action.h"
#include "action_util.h"
#include "lufa.h"
#include "rn42_task.h"
#include "print.h"
#include "debug.h"
#include "timer.h"
#include "command.h"
#include "battery.h"
static bool config_mode = false;
static bool force_usb = false;
static void status_led(bool on)
{
if (on) {
DDRE |= (1<<6);
PORTE &= ~(1<<6);
} else {
DDRE |= (1<<6);
PORTE |= (1<<6);
}
}
void rn42_task_init(void)
{
battery_init();
}
void rn42_task(void)
{
int16_t c;
if (config_mode) {
// Config mode: print output from RN-42
while ((c = serial_recv2()) != -1) {
// without flow control it'll fail to receive data when flooded
xprintf("%c", c);
}
} else {
// Raw mode: interpret output report of LED state
while ((c = serial_recv2()) != -1) {
// LED Out report: 0xFE, 0x02, 0x01, <leds>
// To get the report over UART set bit3 with SH, command.
static enum {LED_INIT, LED_FE, LED_02, LED_01} state = LED_INIT;
switch (state) {
case LED_INIT:
if (c == 0xFE) state = LED_FE;
else state = LED_INIT;
break;
case LED_FE:
if (c == 0x02) state = LED_02;
else state = LED_INIT;
break;
case LED_02:
if (c == 0x01) state = LED_01;
else state = LED_INIT;
break;
case LED_01:
dprintf("LED status: %02X\n", c);
rn42_set_leds(c);
state = LED_INIT;
break;
default:
state = LED_INIT;
}
}
}
/* Bluetooth mode when ready */
if (!config_mode && !force_usb) {
if (!rn42_rts() && host_get_driver() != &rn42_driver) {
clear_keyboard();
host_set_driver(&rn42_driver);
} else if (rn42_rts() && host_get_driver() != &lufa_driver) {
clear_keyboard();
host_set_driver(&lufa_driver);
}
}
static uint16_t prev_timer = 0;
uint16_t e = timer_elapsed(prev_timer);
if (e > 1000) {
/* every second */
prev_timer += e/1000*1000;
/* Low voltage alert */
uint8_t bs = battery_status();
if (bs == LOW_VOLTAGE) {
battery_led(LED_ON);
} else {
battery_led(LED_CHARGER);
}
static uint8_t prev_status = UNKNOWN;
if (bs != prev_status) {
prev_status = bs;
switch (bs) {
case FULL_CHARGED: xprintf("FULL_CHARGED\n"); break;
case CHARGING: xprintf("CHARGING\n"); break;
case DISCHARGING: xprintf("DISCHARGING\n"); break;
case LOW_VOLTAGE: xprintf("LOW_VOLTAGE\n"); break;
default: xprintf("UNKNOWN STATUS\n"); break;
};
}
/* every minute */
uint32_t t = timer_read32()/1000;
if (t%60 == 0) {
uint16_t v = battery_voltage();
uint8_t h = t/3600;
uint8_t m = t%3600/60;
uint8_t s = t%60;
xprintf("%02u:%02u:%02u\t%umV\n", h, m, s, v);
/* TODO: xprintf doesn't work for this.
xprintf("%02u:%02u:%02u\t%umV\n", (t/3600), (t%3600/60), (t%60), v);
*/
}
}
/* Connection monitor */
if (rn42_linked()) {
status_led(true);
} else {
status_led(false);
}
}
/******************************************************************************
* Command
******************************************************************************/
bool command_extra(uint8_t code)
{
uint32_t t;
uint16_t b;
static host_driver_t *prev_driver = &rn42_driver;
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
print("\n\n----- Bluetooth RN-42 Help -----\n");
print("Del: enter/exit config mode(auto_connect/disconnect)\n");
print("i: RN-42 info\n");
print("b: battery voltage\n");
if (config_mode) {
return true;
} else {
print("u: Force USB mode\n");
return false; // to display default command help
}
case KC_DELETE:
if (rn42_autoconnecting()) {
prev_driver = host_get_driver();
clear_keyboard();
_delay_ms(500);
host_set_driver(&rn42_config_driver); // null driver; not to send a key to host
rn42_disconnect();
print("\nRN-42: disconnect\n");
print("Enter config mode\n");
print("type $$$ to start and + for local echo\n");
command_state = CONSOLE;
config_mode = true;
} else {
rn42_autoconnect();
print("\nRN-42: auto_connect\n");
print("Exit config mode\n");
command_state = ONESHOT;
config_mode = false;
//clear_keyboard();
host_set_driver(prev_driver);
}
return true;
case KC_U:
if (config_mode) return false;
if (force_usb) {
print("Auto mode\n");
force_usb = false;
} else {
print("USB mode\n");
force_usb = true;
clear_keyboard();
host_set_driver(&lufa_driver);
}
return true;
case KC_I:
print("\n----- RN-42 info -----\n");
xprintf("protocol: %s\n", (host_get_driver() == &rn42_driver) ? "RN-42" : "LUFA");
xprintf("force_usb: %X\n", force_usb);
xprintf("rn42_autoconnecting(): %X\n", rn42_autoconnecting());
xprintf("rn42_linked(): %X\n", rn42_linked());
xprintf("rn42_rts(): %X\n", rn42_rts());
xprintf("config_mode: %X\n", config_mode);
xprintf("VBUS: %X\n", USBSTA&(1<<VBUS));
xprintf("battery_charging: %X\n", battery_charging());
xprintf("battery_status: %X\n", battery_status());
return true;
case KC_B:
// battery monitor
t = timer_read32()/1000;
b = battery_voltage();
xprintf("BAT: %umV\t", b);
xprintf("%02u:", t/3600);
xprintf("%02u:", t%3600/60);
xprintf("%02u\n", t%60);
return true;
default:
if (config_mode)
return true;
else
return false; // exec default command
}
return true;
}
static uint8_t code2asc(uint8_t code);
bool command_console_extra(uint8_t code)
{
switch (code) {
default:
rn42_putc(code2asc(code));
return true;
}
return false;
}
// convert keycode into ascii charactor
static uint8_t code2asc(uint8_t code)
{
bool shifted = (get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))) ? true : false;
switch (code) {
case KC_A: return (shifted ? 'A' : 'a');
case KC_B: return (shifted ? 'B' : 'b');
case KC_C: return (shifted ? 'C' : 'c');
case KC_D: return (shifted ? 'D' : 'd');
case KC_E: return (shifted ? 'E' : 'e');
case KC_F: return (shifted ? 'F' : 'f');
case KC_G: return (shifted ? 'G' : 'g');
case KC_H: return (shifted ? 'H' : 'h');
case KC_I: return (shifted ? 'I' : 'i');
case KC_J: return (shifted ? 'J' : 'j');
case KC_K: return (shifted ? 'K' : 'k');
case KC_L: return (shifted ? 'L' : 'l');
case KC_M: return (shifted ? 'M' : 'm');
case KC_N: return (shifted ? 'N' : 'n');
case KC_O: return (shifted ? 'O' : 'o');
case KC_P: return (shifted ? 'P' : 'p');
case KC_Q: return (shifted ? 'Q' : 'q');
case KC_R: return (shifted ? 'R' : 'r');
case KC_S: return (shifted ? 'S' : 's');
case KC_T: return (shifted ? 'T' : 't');
case KC_U: return (shifted ? 'U' : 'u');
case KC_V: return (shifted ? 'V' : 'v');
case KC_W: return (shifted ? 'W' : 'w');
case KC_X: return (shifted ? 'X' : 'x');
case KC_Y: return (shifted ? 'Y' : 'y');
case KC_Z: return (shifted ? 'Z' : 'z');
case KC_1: return (shifted ? '!' : '1');
case KC_2: return (shifted ? '@' : '2');
case KC_3: return (shifted ? '#' : '3');
case KC_4: return (shifted ? '$' : '4');
case KC_5: return (shifted ? '%' : '5');
case KC_6: return (shifted ? '^' : '6');
case KC_7: return (shifted ? '&' : '7');
case KC_8: return (shifted ? '*' : '8');
case KC_9: return (shifted ? '(' : '9');
case KC_0: return (shifted ? ')' : '0');
case KC_ENTER: return '\n';
case KC_ESCAPE: return 0x1B;
case KC_BSPACE: return '\b';
case KC_TAB: return '\t';
case KC_SPACE: return ' ';
case KC_MINUS: return (shifted ? '_' : '-');
case KC_EQUAL: return (shifted ? '+' : '=');
case KC_LBRACKET: return (shifted ? '{' : '[');
case KC_RBRACKET: return (shifted ? '}' : ']');
case KC_BSLASH: return (shifted ? '|' : '\\');
case KC_NONUS_HASH: return (shifted ? '|' : '\\');
case KC_SCOLON: return (shifted ? ':' : ';');
case KC_QUOTE: return (shifted ? '"' : '\'');
case KC_GRAVE: return (shifted ? '~' : '`');
case KC_COMMA: return (shifted ? '<' : ',');
case KC_DOT: return (shifted ? '>' : '.');
case KC_SLASH: return (shifted ? '?' : '/');
case KC_DELETE: return '\0'; // Delete to disconnect
default: return ' ';
}
}

7
keyboard/infinity/Makefile
View file

@ -12,11 +12,16 @@ OBJDIR = ./build
OBJECTS = \ OBJECTS = \
$(OBJDIR)/matrix.o \ $(OBJDIR)/matrix.o \
$(OBJDIR)/keymap.o \
$(OBJDIR)/keymap_common.o \ $(OBJDIR)/keymap_common.o \
$(OBJDIR)/led.o \ $(OBJDIR)/led.o \
$(OBJDIR)/main.o $(OBJDIR)/main.o
ifdef KEYMAP
OBJECTS := $(OBJDIR)/keymap_$(KEYMAP).o $(OBJECTS)
else
OBJECTS := $(OBJDIR)/keymap.o $(OBJECTS)
endif
CONFIG_H = config.h CONFIG_H = config.h
INCLUDE_PATHS = -I. INCLUDE_PATHS = -I.

4
keyboard/infinity/config.h
View file

@ -36,4 +36,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
/* for prototype */
//#define INFINITY_PROTOTYPE
#endif #endif

3
keyboard/infinity/keymap.c
View file

@ -20,6 +20,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, \ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, \
NO, LGUI,LALT, SPC, RALT,RGUI,NO, NO), NO, LGUI,LALT, SPC, RALT,RGUI,NO, NO),
/* Layer 1: HHKB mode (HHKB Fn) /* Layer 1: HHKB mode (HHKB Fn)
* ,-----------------------------------------------------------. * ,-----------------------------------------------------------.
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
@ -33,7 +34,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | |Gui|Alt | Space |Alt |Gui| | | * | |Gui|Alt | Space |Alt |Gui| | |
* `-----------------------------------------------------------' * `-----------------------------------------------------------'
*/ */
[1]= [1] =
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \ CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \ TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \

28
keyboard/infinity/keymap_common.h
View file

@ -33,9 +33,9 @@ extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[]; extern const uint16_t fn_actions[];
/* GH60 keymap definition macro #ifdef INFINITY_PROTOTYPE
* K2C, K31 and K3C are extra keys for ISO
*/ /* Infinity prototype */
#define KEYMAP( \ #define KEYMAP( \
K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \ K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \ K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
@ -54,5 +54,27 @@ extern const uint16_t fn_actions[];
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \ { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \
} }
#else
/* Infinity production */
#define KEYMAP( \
K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
K16, K26, K36, K46, K56, K66, K76, K86 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \
}
#endif #endif
#endif

53
keyboard/hhkb/Makefile.nodebug → keyboard/nerd/Makefile
View file

@ -39,7 +39,7 @@
#---------------------------------------------------------------------------- #----------------------------------------------------------------------------
# Target file name (without extension). # Target file name (without extension).
TARGET = hhkb_lufa TARGET = nerd_lufa
# Directory common source filess exist # Directory common source filess exist
TOP_DIR = ../.. TOP_DIR = ../..
@ -47,25 +47,22 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist # Directory keyboard dependent files exist
TARGET_DIR = . TARGET_DIR = .
# project specific files
# List C source files here. (C dependencies are automatically generated.) SRC = keymap_common.c \
SRC += keymap_common.c \
matrix.c \ matrix.c \
led.c backlight.c
ifdef LAYOUT
OPT_DEFS += -DNERD_LAYOUT_$(LAYOUT)
endif
ifdef KEYMAP ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC) SRC := keymap_$(LAYOUT)_$(KEYMAP).c $(SRC)
else
SRC := keymap_hasu.c $(SRC)
endif endif
CONFIG_H = config.h CONFIG_H = config.h
# MCU name # MCU name
# PJRC Teensy++ 2.0
#MCU = at90usb1286
# TMK Alt Controller or PJRC Teensy 2.0
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency. # Processor frequency.
@ -79,8 +76,7 @@ MCU = atmega32u4
# does not *change* the processor frequency - it should merely be updated to # does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate # reflect the processor speed set externally so that the code can use accurate
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 8000000
# #
# LUFA specific # LUFA specific
@ -101,30 +97,25 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Interrupt driven control endpoint task
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes* # Boot Section Size in *bytes*
# Teensy halfKay 512 # Teensy halfKay 512
# Teensy++ halfKay 1024 # Teensy++ halfKay 1024
# Atmel DFU loader 4096 (TMK Alt Controller) # Atmel DFU loader 4096
# LUFA bootloader 4096 # LUFA bootloader 4096
# USBaspLoader 2048 # USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096 OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
#CONSOLE_ENABLE = yes # Console for debug CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Search Path # Search Path
VPATH += $(TARGET_DIR) VPATH += $(TARGET_DIR)
@ -133,9 +124,3 @@ VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk include $(TOP_DIR)/rules.mk
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
debug-on: all
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
debug-off: all

52
keyboard/nerd/README.md Normal file
View file

@ -0,0 +1,52 @@
NerD keyboard firmware
========================
Korean Keyboard designed by GON.
*Note that this is not the official firmware*
Hardware revision
-----------------
This firmware was developed and tested for NerD pcb version 1.61 and 2.0.
Supported features
------------------
* All layout options are supported
* All leds are supported
* 60% and 80% (TKL) pcbs are supported
Changing Bootloader
-------------------
You can't simply just upload this firmware to a new NerD board because the original
bootloader won't accept DFU connections.
You can change the bootloader of the keyboard with an ISP programmer of your choice.
The bootloader pins are easy to access on the NerD pcb.
*Be aware that after changing the bootloader the official configuration software
won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.*
Build
-----
For building you have to specify two build-options, LAYOUT and KEYMAP. The layout option defines
pcb layout and can be either 60% or 80% at the momemnt. The keymap option selects your
preferred keymapping.
Move to this directory then just run `make LAYOUT=60 KEYMAP=ansi150`
to compile a firmware for a 60% pcb with ANSI 150 key mapping.
Jump to Bootloader
------------------
You can jump to bootloader by software if you have a macro defined for this in your keymap. The
default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.

81
keyboard/nerd/backlight.c Normal file
View file

@ -0,0 +1,81 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "backlight.h"
#include "led.h"
void backlight_init_ports()
{
DDRB |= 0b11100000; // PB7 (switch), PB6 (pcb), PB5 (caps)
}
void led_set(uint8_t usb_led)
{
(usb_led & (1<<USB_LED_CAPS_LOCK)) ? backlight_caps_enable() : backlight_caps_disable();
}
void backlight_set(uint8_t level)
{
(level & BACKLIGHT_SWITCH) ? backlight_switch_enable() : backlight_switch_disable();
(level & BACKLIGHT_PCB) ? backlight_pcb_enable() : backlight_pcb_disable();
}
void backlight_switch_enable()
{
PORTB |= 0b10000000;
}
void backlight_switch_disable()
{
PORTB &= ~0b10000000;
}
void backlight_switch_invert()
{
PORTB ^= 0b10000000;
}
void backlight_pcb_enable()
{
PORTB |= 0b01000000;
}
void backlight_pcb_disable()
{
PORTB &= ~0b01000000;
}
void backlight_pcb_invert()
{
PORTB ^= 0b01000000;
}
void backlight_caps_enable()
{
PORTB |= 0b00100000;
}
void backlight_caps_disable()
{
PORTB &= ~0b00100000;
}
void backlight_caps_invert()
{
PORTB ^= 0b00100000;
}

40
keyboard/nerd/backlight.h Normal file
View file

@ -0,0 +1,40 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef BACKLIGHT_H
#define BACKLIGHT_H
enum backlight_level {
BACKLIGHT_SWITCH = 0b0000001,
BACKLIGHT_PCB = 0b0000010,
};
void backlight_init_ports(void);
void backlight_switch_invert(void);
void backlight_switch_enable(void);
void backlight_switch_disable(void);
void backlight_pcb_invert(void);
void backlight_pcb_enable(void);
void backlight_pcb_disable(void);
void backlight_caps_invert(void);
void backlight_caps_enable(void);
void backlight_caps_disable(void);
#endif // BACKLIGHT_H

49
keyboard/nerd/config.h Normal file
View file

@ -0,0 +1,49 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER GON
#define PRODUCT NerD
#define DESCRIPTION t.m.k. keyboard firmware for NerD
/* key matrix size */
#define MATRIX_ROWS 9
#define MATRIX_COLS 10
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* number of backlight levels */
#define BACKLIGHT_LEVELS 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

30
keyboard/nerd/keymap_60_ansi150.c Normal file
View file

@ -0,0 +1,30 @@
#include "keymap_common.h"
#include "backlight.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default */
KEYMAP_ANSI150(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
ESC, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \
LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, \
LCTL,LGUI,LALT, SPC, RALT,FN0 ,RCTL),
/* Layer 1: Space Fn */
KEYMAP_ANSI150(TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS),
/* Layer 2: Functions */
KEYMAP_ANSI150(SLEP,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, MUTE, \
TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,PAUS,HOME,INS, END, MPLY,VOLD,VOLU,FN3, \
CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,MPRV,MNXT, FN2, \
UP, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
LEFT,DOWN,RGHT, TRNS, TRNS,TRNS,TRNS)
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(2),
[1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),
[2] = ACTION_LAYER_TOGGLE(1),
[3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH)
};

33
keyboard/nerd/keymap_80_ansi150.c Normal file
View file

@ -0,0 +1,33 @@
#include "keymap_common.h"
#include "backlight.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default */
KEYMAP_ANSI150(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, \
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \
LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, UP, \
LCTL,LGUI,LALT, SPC, RALT,FN0, RCTL, LEFT,DOWN,RGHT),
/* Layer 1: Space Fn */
KEYMAP_ANSI150(TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
ESC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS, TRNS,TRNS,TRNS),
/* Layer 2: Functions */
KEYMAP_ANSI150(SLEP, MYCM,WSCH,WHOM,MAIL,VOLD,VOLU,MUTE,MSEL,MPLY,MPRV,MNXT,MSTP, TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,END, TRNS,TRNS,TRNS,TRNS,TRNS,HOME,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,TRNS,TRNS,INS, TRNS,TRNS,TRNS,TRNS,FN3, TRNS,TRNS,TRNS, \
CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS, FN2, \
TRNS, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(2),
[1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),
[2] = ACTION_LAYER_TOGGLE(1),
[3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH)
};

29
keyboard/nerd/keymap_common.c Normal file
View file

@ -0,0 +1,29 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap_common.h"
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
}

89
keyboard/nerd/keymap_common.h Normal file
View file

@ -0,0 +1,89 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include <stdint.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#include "keymap.h"
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
#define KEYMAP( \
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09 }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19 }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29 }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39 }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49 }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59 }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69 }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_##K79 }, \
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_##K87, KC_##K88, KC_##K89 } \
}
#ifdef NERD_LAYOUT_60
#define KEYMAP_ANSI150( \
K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \
K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, \
K06, K05, K78, K70, K73, K74, K75 \
) KEYMAP( \
K08, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, NO, NO, NO, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, NO, NO, NO, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \
K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, NO, \
K06, K05, K78, K70, NO, K73, K74, K75, NO, NO, NO \
)
#endif
#ifdef NERD_LAYOUT_80
#define KEYMAP_ANSI150( \
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \
K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K86, \
K06, K05, K78, K70, K73, K74, K75, K76, K77, K87 \
) KEYMAP( \
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \
K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, K86, \
K06, K05, K78, K70, NO, K73, K74, K75, K76, K77, K87 \
)
#endif
#endif // KEYMAP_COMMON_H

221
keyboard/nerd/matrix.c Normal file
View file

@ -0,0 +1,221 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "backlight.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static uint16_t read_inputs(void);
static void init_inputs(void);
static void init_outputs(void);
static void reset_inputs(void);
static void reset_outputs(void);
static void select_output(uint8_t col);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
backlight_init_ports();
init_inputs();
init_outputs();
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
reset_inputs();
reset_outputs();
select_output(col);
_delay_us(3);
uint16_t rows = read_inputs();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
if (debouncing) {
dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
}
debouncing = DEBOUNCE;
}
}
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
static void init_inputs(void)
{
DDRE &= ~0b01000000; // PE6 (Col 0)
DDRB &= ~0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4)
DDRF &= ~0b00000001; // PF0 (Col 5)
DDRD &= ~0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7)
}
static uint16_t read_inputs(void)
{
return (PINE&(1<<6) ? 0 : (1<<0)) | // PE6 (Col 0)
(PINB&(1<<0) ? 0 : (1<<1)) | // PB0 (Col 1)
(PINB&(1<<1) ? 0 : (1<<2)) | // PB1 (Col 2)
(PINB&(1<<2) ? 0 : (1<<3)) | // PB2 (Col 3)
(PINB&(1<<3) ? 0 : (1<<4)) | // PB3 (Col 4)
(PINF&(1<<0) ? 0 : (1<<5)) | // PF0 (Col 5)
(PIND&(1<<0) ? 0 : (1<<6)) | // PD0 (Col 6)
(PIND&(1<<5) ? 0 : (1<<7)) | // PD5 (Col 7)
(PIND&(1<<1) ? 0 : (1<<8)); // PD1 (Col 8 TKL)
}
static void reset_inputs(void)
{
PORTE |= 0b01000000; // PE6 (Col 0)
PORTB |= 0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4)
PORTF |= 0b00000001; // PF0 (Col 5)
PORTD |= 0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7)
}
static void init_outputs(void)
{
DDRB |= 0b00010000; // PB4 (Row 0)
DDRE |= 0b00000100; // PE2 (Row 1)
DDRF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7)
DDRC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9)
DDRD |= 0b10000000; // PD7 (Row 8)
}
static void reset_outputs(void)
{
PORTB |= 0b00010000; // PB4 (Row 0)
PORTE |= 0b00000100; // PE2 (Row 1)
PORTF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7)
PORTC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9)
PORTD |= 0b10000000; // PD7 (Row 8)
}
static void select_output(uint8_t col)
{
switch (col) {
case 0:
PORTB &= ~(1<<4);
break;
case 1:
PORTE &= ~(1<<2);
break;
case 2:
PORTF &= ~(1<<4);
break;
case 3:
PORTF &= ~(1<<7);
break;
case 4:
PORTF &= ~(1<<1);
break;
case 5:
PORTF &= ~(1<<6);
break;
case 6:
PORTC &= ~(1<<6);
break;
case 7:
PORTF &= ~(1<<5);
break;
case 8:
PORTD &= ~(1<<7);
break;
case 9:
PORTC &= ~(1<<7);
break;
}
}

35
keyboard/planck/Makefile
View file

@ -47,15 +47,35 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist # Directory keyboard dependent files exist
TARGET_DIR = . TARGET_DIR = .
# project specific files
SRC = keymap_common.c \
matrix.c \ # # project specific files
led.c ifdef COMMON
SRC = keymap_common.c \
matrix_pcb.c \
led.c \
backlight.c
ifdef KEYMAP ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC) SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
else else
SRC := keymap_jack.c $(SRC) SRC := common_keymaps/keymap_jack.c $(SRC)
endif
else
SRC = extended_keymap_common.c \
matrix_pcb.c \
led.c \
backlight.c
ifdef KEYMAP
SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
else
SRC := extended_keymaps/extended_keymap_default.c $(SRC)
endif
endif endif
CONFIG_H = config.h CONFIG_H = config.h
@ -118,9 +138,10 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400) CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Optimize size but this may cause error "relocation truncated to fit" # Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax #EXTRALDFLAGS = -Wl,--relax

64
keyboard/planck/README.md
View file

@ -1,24 +1,56 @@
Planck keyboard firmware Planck keyboard firmware
====================== ======================
DIY/Assembled compact ortholinear keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
## Extended Keymap
If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:
- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able)
- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit
- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards)
- Use `MACRODOWN()` instead of `MACRO()` to easily make a keydown macro (`CM_*` works here too)
### Some notes on usage:
- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix
- Keep an eye on the Makefile - this needs to include the correct files to work
- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent
## Build
Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/planck#environment-setup)
Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST).
Depending on which keymap you would like to use, you will have to compile slightly differently.
####Default
To build with the default keymap, simply move to the tmk\_keyboard/keyboard/planck/ and run `make` as follows:
```
$ make
```
## Keymap
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
####**Extended Keymaps**
To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like:
```
$ make KEYMAP=[common|jack|<name>]
```
_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\<name\>.c__**
####**Common Keymaps**
Building with a common keymap is as simple as adding the COMMON option. Note that only
```
$ make KEYMAP=[common|jack|<name>] COMMON=true
```
_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\<name\>.c__**
## Notable TMK forks (which some of the keymap files are from) ## Notable TMK forks (which some of the keymap files are from)
- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) - [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) - [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) - [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) - [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
## Build
Move to this directory then just run `make` like:
$ make
Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
## Keymap
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
$ make KEYMAP=[<name>]

6
keyboard/planck/__avr_gdbinit Normal file
View file

@ -0,0 +1,6 @@
define reset
SIGNAL SIGHUP
end
file planck_lufa.elf
target remote localhost:4242
break main

49
keyboard/planck/backlight.c Normal file
View file

@ -0,0 +1,49 @@
#include <avr/io.h>
#include "backlight.h"
#define CHANNEL OCR1C
void backlight_init_ports()
{
// Setup PB7 as output and output low.
DDRB |= (1<<7);
PORTB &= ~(1<<7);
// Use full 16-bit resolution.
ICR1 = 0xFFFF;
// I could write a wall of text here to explain... but TL;DW
// Go read the ATmega32u4 datasheet.
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
// Pin PB7 = OCR1C (Timer 1, Channel C)
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
// (i.e. start high, go low when counter matches.)
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
backlight_init();
}
void backlight_set(uint8_t level)
{
if ( level == 0 )
{
// Turn off PWM control on PB7, revert to output low.
TCCR1A &= ~(_BV(COM1C1));
// CHANNEL = level << OFFSET | 0x0FFF;
CHANNEL = ((1 << level) - 1);
}
else
{
// Turn on PWM control of PB7
TCCR1A |= _BV(COM1C1);
// CHANNEL = level << OFFSET | 0x0FFF;
CHANNEL = ((1 << level) - 1);
}
}

12
keyboard/planck/keymap_brett.c → keyboard/planck/common_keymaps/keymap_brett.c
View file

@ -5,15 +5,15 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
LGUI, TAB, LCTL, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP( /* RAISE */ [1] = KEYMAP( /* RAISE */
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL,
TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, TRNS, TRNS, TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS,
TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP, TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP,
MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, PGDN), MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, 0, 0, TRNS, PGDN),
[2] = KEYMAP( /* LOWER */ [2] = KEYMAP( /* LOWER */
FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, MINS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, EQL, TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
}; };

0
keyboard/planck/keymap_dotcom.c → keyboard/planck/common_keymaps/keymap_dotcom.c
View file

2
keyboard/planck/keymap_jack.c → keyboard/planck/common_keymaps/keymap_jack.c
View file

@ -24,7 +24,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
}; };
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay
[3] = ACTION_DEFAULT_LAYER_SET(0), [3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1), [4] = ACTION_DEFAULT_LAYER_SET(1),

0
keyboard/planck/keymap_joe.c → keyboard/planck/common_keymaps/keymap_joe.c
View file

0
keyboard/planck/keymap_matthew.c → keyboard/planck/common_keymaps/keymap_matthew.c
View file

49
keyboard/planck/keymap_nathan.c → keyboard/planck/common_keymaps/keymap_nathan.c
View file

@ -3,31 +3,6 @@
#include "keymap_common.h" #include "keymap_common.h"
#ifndef KEYMAP_GRID
/* Planck keymap definition macro for the 'grid' layout
* ,-----------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------'
*/
#define KEYMAP_GRID( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \
}
#endif
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: main layer /* 0: main layer
* ,-----------------------------------------------------------------------. * ,-----------------------------------------------------------------------.
@ -50,9 +25,9 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* The top row are Visual Studio combos: * The top row are Visual Studio combos:
* 'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line' * 'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line'
* 2nd row are key combos: * 2nd row are key combos:
* 'ctrl-alt-delete', 'ctrl-shift-escape' * 'ctrl-alt-delete', 'ctrl-shift-escape'
* 3rd row are macros keys: * 3rd row are macros keys:
* 'P0' - 'P5' execute a script on Windows machines * 'P0' - 'P5' execute a script on Windows machines
* ,-----------------------------------------------------------------------. * ,-----------------------------------------------------------------------.
* | ESC | F5 | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del | * | ESC | F5 | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del |
* |-----------------------------------------------------------------------| * |-----------------------------------------------------------------------|
@ -113,7 +88,7 @@ const uint16_t PROGMEM fn_actions[] = {
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // < [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // <
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // { [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // > [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // >
// Combo // Combo
[16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete
@ -127,7 +102,7 @@ const uint16_t PROGMEM fn_actions[] = {
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
[25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
[26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
[27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _ [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // " [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // "
[29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~ [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~
@ -142,39 +117,37 @@ const uint16_t PROGMEM fn_actions[] = {
// *return* // *return*
#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END ) #define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END )
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
{
keyevent_t event = record->event; keyevent_t event = record->event;
switch (id) { switch (id) {
case M_P0: case M_P0:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 0 ) : ADD_PYTHON_PROGRAM_ON_WIN( 0 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_P1: case M_P1:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 1 ) : ADD_PYTHON_PROGRAM_ON_WIN( 1 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_P2: case M_P2:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 2 ) : ADD_PYTHON_PROGRAM_ON_WIN( 2 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_P3: case M_P3:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 3 ) : ADD_PYTHON_PROGRAM_ON_WIN( 3 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_P4: case M_P4:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 4 ) : ADD_PYTHON_PROGRAM_ON_WIN( 4 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_P5: case M_P5:
return event.pressed ? return event.pressed ?
ADD_PYTHON_PROGRAM_ON_WIN( 5 ) : ADD_PYTHON_PROGRAM_ON_WIN( 5 ) :
RUN_PYTHON_PROGRAM_ON_WIN; RUN_PYTHON_PROGRAM_ON_WIN;
case M_USERNAME: case M_USERNAME:
return event.pressed ? return event.pressed ?
MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) : MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) :
MACRO_NONE; MACRO_NONE;
} }
return MACRO_NONE; return MACRO_NONE;
} }

0
keyboard/planck/keymap_peasant.c → keyboard/planck/common_keymaps/keymap_peasant.c
View file

74
keyboard/planck/common_keymaps/keymap_reed.c Normal file
View file

@ -0,0 +1,74 @@
#include "keymap_common.h"
/*
* BUILD:
* Simply run the command below in the keyboard/planck directory
* to build against this keymap
*
* make KEYMAP=reed COMMON_KEYMAP=true
*
*
* DETAILS:
*
* This layout works off of Jack's layout, making some changes that I
* feel significantly improve the function of the keyboard. Major changes
* include adding a "gaming mode" that will allow users to still access
* the number keys 1 through 4 easily for games that require it. Also
* included is the ability to use the tap/hold function for easy use of
* right shift and thumb shift with their tapped companions.
*
*/
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP_GRID( /* Reed */
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5,
LCTL, CAPS, LALT, LGUI, FN2, FN7, SPC, FN1, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP_GRID( /* Reed EXTREME GAMING */
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5,
LCTL, 1, 2, 3, 4, SPC, FN2, FN1, LEFT, DOWN, UP, RGHT),
[2] = KEYMAP_GRID( /* Reed RAISE */
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,
TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS,
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY),
[3] = KEYMAP_GRID( /* Reed LOWER */
TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL,
TRNS, TRNS, INS, HOME, PGUP, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
TRNS, TRNS, DEL, END, PGDN, F11, F12, F13, TRNS, VOLD, VOLU, TRNS,
TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - RAISE
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - LOWER
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
// Actions for the tap/hold modifiers listed above
[5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
[7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPC),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
[29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
};

57
keyboard/planck/common_keymaps/keymap_sean.c Normal file
View file

@ -0,0 +1,57 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Matrix Dvorak */
QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L,
A, O, E, U, I, ESC, BSPC, D, H, T, N, S,
SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z,
LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP( /* Matrix Qwerty */
Q, W, E, R, T, QUOT, EQL, Y, U, I, O, P,
A, S, D, F, G, ESC, BSPC, H, J, K, L, SCLN,
Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH,
LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[2] = KEYMAP( /* fn1 lower */
F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10,
1, 2, 3, 4, 5, F18, DEL, 6, 7, 8, 9, 0,
FN3, FN4, TRNS, GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN5, HOME, PGDN, PGUP, END),
[3] = KEYMAP( /* fn2 raise */
F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10,
F11, F12, F13, F14, F15, F18, DEL, F16, F17, F18, F19, F20,
FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, LSFT,PAUSE, RSFT,
LEFT, DOWN, UP, RGHT, FN5, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE),
[4] = KEYMAP( /* lower + raise */
LEFT, DOWN, UP, RGHT, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, UP, RGHT,
HOME, PGDN, PGUP, END, TRNS, F18, DEL, TRNS, HOME, PGDN, PGUP, END,
FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, MPLY, RSFT,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay LOWER
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay RAISE
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
[5] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay LOWER + RAISE
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
};

0
keyboard/planck/keymap_shane.c → keyboard/planck/common_keymaps/keymap_shane.c
View file

44
keyboard/planck/common_keymaps/keymap_simon.c Normal file
View file

@ -0,0 +1,44 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Jack */
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, DOT, ENT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SCLN, DEL,
LCTL, ENT, LALT, CAPS, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP( /* Jack RAISE */
TRNS, F1, F2, F3, F4, NO, FN11, FN9, FN12, NO, FN14, TRNS,
TRNS, F5, F6, F7, F8, FN16, SLSH, MINS, EQL, LBRC, FN8, TRNS,
TRNS, F9, F10, F11, F12, F15, F16, FN22, SCLN, MINS, QUOT, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
[2] = KEYMAP( /* Jack LOWER */
FN22, 1, 2, 3, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
TRNS, 4, 5, 6, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
TRNS, 7, 8, 9, 0, FN28, FN15, F7, F8, F9, F10, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
[2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
[8] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH),
[9] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
[29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
};

44
keyboard/planck/common_keymaps/keymap_tim.c Normal file
View file

@ -0,0 +1,44 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP(
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
LCTL, LALT, DEL, LGUI, FN2, SPC, FN1, F2, F5, F9, F12),
[2] = KEYMAP( /* RAISE */
TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,
GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS),
[3] = KEYMAP( /* LOWER */
TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
[29] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
};

56
keyboard/planck/common_keymaps/keymap_wilba.c Normal file
View file

@ -0,0 +1,56 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Wilba */
FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP( /* Wilba Alternate */
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[2] = KEYMAP( /* Wilba LOWER */
TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS,
TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS,
TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY),
[3] = KEYMAP( /* Wilba RAISE */
TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS,
TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // LOWER
[2] = ACTION_LAYER_MOMENTARY(3), // RAISE
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
[25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // |
[26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
[27] = ACTION_BACKLIGHT_TOGGLE(),
[28] = ACTION_BACKLIGHT_INCREASE(),
[29] = ACTION_BACKLIGHT_DECREASE()
};

8
keyboard/planck/config.h
View file

@ -23,9 +23,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060 #define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
#define MANUFACTURER jackhumbert #define MANUFACTURER Ortholinear Keyboards
#define PRODUCT Planck #define PRODUCT Planck
#define DESCRIPTION t.m.k. keyboard firmware for the Planck #define DESCRIPTION A compact ortholinear keyboard
/* key matrix size */ /* key matrix size */
#define MATRIX_ROWS 4 #define MATRIX_ROWS 4
@ -34,6 +34,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
#define BACKLIGHT_LEVELS 15
/* Set 0 if debouncing isn't needed */ /* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5 #define DEBOUNCE 5

208
keyboard/planck/extended_keymap_common.c Normal file
View file

@ -0,0 +1,208 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "extended_keymap_common.h"
#include "report.h"
#include "keycode.h"
#include "action_layer.h"
#include "action.h"
#include "action_macro.h"
#include "debug.h"
#include "backlight.h"
static action_t keycode_to_action(uint16_t keycode);
/* converts key to action */
action_t action_for_key(uint8_t layer, keypos_t key)
{
// 16bit keycodes - important
uint16_t keycode = keymap_key_to_keycode(layer, key);
if (keycode >= 0x0100 && keycode < 0x2000) {
// Has a modifier
action_t action;
// Split it up
action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF);
return action;
} else if (keycode >= 0x2000 && keycode < 0x3000) {
// Is a shortcut for function layer, pull last 12bits
return keymap_func_to_action(keycode & 0xFFF);
} else if (keycode >= 0x3000 && keycode < 0x4000) {
action_t action;
action.code = ACTION_MACRO(keycode & 0xFF);
return action;
} else if (keycode >= BL_0 & keycode <= BL_15) {
action_t action;
action.code = ACTION_BACKLIGHT_LEVEL(keycode & 0x000F);
return action;
} else if (keycode == BL_DEC) {
action_t action;
action.code = ACTION_BACKLIGHT_DECREASE();
return action;
} else if (keycode == BL_INC) {
action_t action;
action.code = ACTION_BACKLIGHT_INCREASE();
return action;
} else if (keycode == BL_TOGG) {
action_t action;
action.code = ACTION_BACKLIGHT_TOGGLE();
return action;
} else if (keycode == BL_STEP) {
action_t action;
action.code = ACTION_BACKLIGHT_STEP();
return action;
} else if (keycode == RESET) {
bootloader_jump();
return;
}
switch (keycode) {
case KC_FN0 ... KC_FN31:
return keymap_fn_to_action(keycode);
#ifdef BOOTMAGIC_ENABLE
case KC_CAPSLOCK:
case KC_LOCKING_CAPS:
if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
return keycode_to_action(KC_LCTL);
}
return keycode_to_action(keycode);
case KC_LCTL:
if (keymap_config.swap_control_capslock) {
return keycode_to_action(KC_CAPSLOCK);
}
return keycode_to_action(KC_LCTL);
case KC_LALT:
if (keymap_config.swap_lalt_lgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
}
return keycode_to_action(KC_LALT);
case KC_LGUI:
if (keymap_config.swap_lalt_lgui) {
return keycode_to_action(KC_LALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
case KC_RALT:
if (keymap_config.swap_ralt_rgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
}
return keycode_to_action(KC_RALT);
case KC_RGUI:
if (keymap_config.swap_ralt_rgui) {
return keycode_to_action(KC_RALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
case KC_GRAVE:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_ESC);
}
return keycode_to_action(KC_GRAVE);
case KC_ESC:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_GRAVE);
}
return keycode_to_action(KC_ESC);
case KC_BSLASH:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSPACE);
}
return keycode_to_action(KC_BSLASH);
case KC_BSPACE:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSLASH);
}
return keycode_to_action(KC_BSPACE);
#endif
default:
return keycode_to_action(keycode);
}
}
/* Macro */
__attribute__ ((weak))
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
return MACRO_NONE;
}
/* Function */
__attribute__ ((weak))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
/* translates keycode to action */
static action_t keycode_to_action(uint16_t keycode)
{
action_t action;
switch (keycode) {
case KC_A ... KC_EXSEL:
case KC_LCTRL ... KC_RGUI:
action.code = ACTION_KEY(keycode);
break;
case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
break;
case KC_AUDIO_MUTE ... KC_WWW_FAVORITES:
action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
break;
case KC_MS_UP ... KC_MS_ACCEL2:
action.code = ACTION_MOUSEKEY(keycode);
break;
case KC_TRNS:
action.code = ACTION_TRANSPARENT;
break;
default:
action.code = ACTION_NO;
break;
}
return action;
}
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
// Read entire word (16bits)
return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint16_t keycode)
{
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
}
action_t keymap_func_to_action(uint16_t keycode)
{
// For FUNC without 8bit limit
return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) };
}

177
keyboard/planck/extended_keymap_common.h Normal file
View file

@ -0,0 +1,177 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_H
#define KEYMAP_H
#include <stdint.h>
#include <stdbool.h>
#include "action.h"
#include <avr/pgmspace.h>
#include "keycode.h"
#include "keymap.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#ifdef BOOTMAGIC_ENABLE
/* NOTE: Not portable. Bit field order depends on implementation */
typedef union {
uint16_t raw;
struct {
bool swap_control_capslock:1;
bool capslock_to_control:1;
bool swap_lalt_lgui:1;
bool swap_ralt_rgui:1;
bool no_gui:1;
bool swap_grave_esc:1;
bool swap_backslash_backspace:1;
bool nkro:1;
};
} keymap_config_t;
keymap_config_t keymap_config;
#endif
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint16_t keycode);
/* translates Fn keycode to action */
action_t keymap_func_to_action(uint16_t keycode);
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
// Ability to use mods in layouts
#define LCTL(kc) kc | 0x0100
#define LSFT(kc) kc | 0x0200
#define LALT(kc) kc | 0x0400
#define LGUI(kc) kc | 0x0800
#define RCTL(kc) kc | 0x1100
#define RSFT(kc) kc | 0x1200
#define RALT(kc) kc | 0x1400
#define RGUI(kc) kc | 0x1800
// Alias for function layers than expand past FN31
#define FUNC(kc) kc | 0x2000
// Aliases
#define S(kc) LSFT(kc)
#define F(kc) FUNC(kc)
// For software implementation of colemak
#define CM_Q KC_Q
#define CM_W KC_W
#define CM_F KC_E
#define CM_P KC_R
#define CM_G KC_T
#define CM_J KC_Y
#define CM_L KC_U
#define CM_U KC_I
#define CM_Y KC_O
#define CM_SCLN KC_P
#define CM_A KC_A
#define CM_R KC_S
#define CM_S KC_D
#define CM_T KC_F
#define CM_D KC_G
#define CM_H KC_H
#define CM_N KC_J
#define CM_E KC_K
#define CM_I KC_L
#define CM_O KC_SCLN
#define CM_Z KC_Z
#define CM_X KC_X
#define CM_C KC_C
#define CM_V KC_V
#define CM_B KC_B
#define CM_K KC_N
#define CM_M KC_M
#define CM_COMM KC_COMM
#define CM_DOT KC_DOT
#define CM_SLSH KC_SLSH
// Make it easy to support these in macros
#define KC_CM_Q CM_Q
#define KC_CM_W CM_W
#define KC_CM_F CM_F
#define KC_CM_P CM_P
#define KC_CM_G CM_G
#define KC_CM_J CM_J
#define KC_CM_L CM_L
#define KC_CM_U CM_U
#define KC_CM_Y CM_Y
#define KC_CM_SCLN CM_SCLN
#define KC_CM_A CM_A
#define KC_CM_R CM_R
#define KC_CM_S CM_S
#define KC_CM_T CM_T
#define KC_CM_D CM_D
#define KC_CM_H CM_H
#define KC_CM_N CM_N
#define KC_CM_E CM_E
#define KC_CM_I CM_I
#define KC_CM_O CM_O
#define KC_CM_Z CM_Z
#define KC_CM_X CM_X
#define KC_CM_C CM_C
#define KC_CM_V CM_V
#define KC_CM_B CM_B
#define KC_CM_K CM_K
#define KC_CM_M CM_M
#define KC_CM_COMM CM_COMM
#define KC_CM_DOT CM_DOT
#define KC_CM_SLSH CM_SLSH
#define M(kc) kc | 0x3000
#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
#define BL_ON 0x4009
#define BL_OFF 0x4000
#define BL_0 0x4000
#define BL_1 0x4001
#define BL_2 0x4002
#define BL_3 0x4003
#define BL_4 0x4004
#define BL_5 0x4005
#define BL_6 0x4006
#define BL_7 0x4007
#define BL_8 0x4008
#define BL_9 0x4009
#define BL_10 0x400A
#define BL_11 0x400B
#define BL_12 0x400C
#define BL_13 0x400D
#define BL_14 0x400E
#define BL_15 0x400F
#define BL_DEC 0x4010
#define BL_INC 0x4011
#define BL_TOGG 0x4012
#define BL_STEP 0x4013
#define RESET 0x5000
#endif

50
keyboard/planck/extended_keymaps/extended_keymap_austin.c Normal file
View file

@ -0,0 +1,50 @@
#include "extended_keymap_common.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{BL_STEP, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
// Space is repeated to accommadate for both spacebar wiring positions
},
[1] = { /* Colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{KC_FN3, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[2] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[3] = { /* LOWER */
{S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
[2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
return MACRODOWN(T(CM_T), END);
break;
}
return MACRO_NONE;
};

54
keyboard/planck/extended_keymaps/extended_keymap_charlie.c Normal file
View file

@ -0,0 +1,54 @@
#include "extended_keymap_common.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Native */
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, FUNC(2)},
{KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_TAB, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{KC_DEL, KC_LCTL, KC_NO, KC_LSFT, KC_LALT, KC_SPC, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[1] = { /* QWERTY->PHOTOSHOP */
{KC_DELETE, KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, FUNC(1)},
{KC_O, KC_G, KC_S, KC_U, KC_T, FUNC(27), KC_F21, KC_F10, KC_F11, KC_F7, KC_F8, KC_F9},
{KC_TAB, FUNC(4), FUNC(5), FUNC(6), KC_F1, FUNC(7), KC_F18, KC_F19, KC_F23, KC_F20, KC_F22, FUNC(9)},
{KC_COMM, KC_DOT, KC_R, FUNC(11), FUNC(3), KC_SPC, FUNC(12), KC_F2, FUNC(8), KC_F3, KC_F14}
},
[2] = { /* 2: FUNC(3 PHOTOSHOP */
{KC_ESC, FUNC(25), FUNC(26), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO},
{KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FUNC(19), FUNC(20), FUNC(21)},
{KC_C, KC_NO, FUNC(22), FUNC(5), KC_NO, FUNC(23), KC_NO, KC_NO, KC_NO, KC_NO, FUNC(13), KC_NO},
{FUNC(14), FUNC(15), FUNC(16), FUNC(17), FUNC(3), KC_SPC, FUNC(18), KC_NO, KC_NO, KC_F24, KC_NO}
}
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout
[2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets
[3] = ACTION_LAYER_MOMENTARY(2), // Photoshop function layer
[4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK
[5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse
[6] = ACTION_MODS_KEY(MOD_LSFT, KC_M), // marquee select
[7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC), // fill
[8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X), // warp
[9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12), // merge all new layer
[10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), // zoom out
[11] = ACTION_MODS_KEY(MOD_LCTL, KC_H), // RBG sliders
[12] = ACTION_MODS_KEY(MOD_LCTL, KC_S), // save
[13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5), // layer mask from transparancy
[14] = ACTION_MODS_KEY(MOD_LCTL, KC_F2), // stroke
[15] = ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_F2), // stroke layer
[16] = ACTION_MODS_KEY(MOD_LCTL, KC_0), // zoom 0
[17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H), // HSV sliders
[18] = ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_S), // save as
[19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7), // gaussian blur
[20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8), // motion blur
[21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X), // liquify filter
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // prev layer blending
[23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_BSPC), // KC_NOrmal layer blending
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // next layer blending
[25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z), // step back
[26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y), // step forward
[27] = ACTION_MODS_KEY(MOD_LCTL, KC_R), // rasterize
};

50
keyboard/planck/extended_keymaps/extended_keymap_default.c Normal file
View file

@ -0,0 +1,50 @@
#include "extended_keymap_common.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
// Space is repeated to accommadate for both spacebar wiring positions
},
[1] = { /* Colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[2] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[3] = { /* LOWER */
{S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
[2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
return MACRODOWN(T(CM_T), END);
break;
}
return MACRO_NONE;
};

50
keyboard/planck/extended_keymaps/extended_keymap_jack.c Normal file
View file

@ -0,0 +1,50 @@
#include "extended_keymap_common.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Jack soft-coded colemak */
{KC_TAB, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_BSPC},
{KC_ESC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT},
{KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, KC_ENT},
{BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
// Space is repeated to accommadate for both spacebar wiring positions
},
[1] = { /* Jack hard-coded colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
{KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[2] = { /* Jack RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[3] = { /* Jack LOWER */
{S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
{KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
return MACRODOWN(T(CM_T), END);
break;
}
return MACRO_NONE;
};

26
keyboard/planck/keymap_common.h
View file

@ -35,19 +35,41 @@ extern const uint16_t fn_actions[];
// MIT Layout // MIT Layout
/*
* ,-----------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------'
*/
#define KEYMAP( \ #define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \
) { \ ) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \
} }
// Grid Layout // Grid Layout
/*
* ,-----------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------------------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------'
*/
#define KEYMAP_GRID( \ #define KEYMAP_GRID( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \

50
keyboard/planck/keymap_sean.c
View file

@ -1,50 +0,0 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Matrix Dvorak */
QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L,
A, O, E, U, I, ESC, BSPC, D, H, T, N, S,
SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z,
LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[1] = KEYMAP( /* Matrix Qwerty */
Q, W, E, R, T, SLSH, EQL, Y, U, I, O, P,
A, S, D, F, G, ESC, BSPC, H, J, K, L, SCLN,
Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH,
LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[2] = KEYMAP( /* fn1 lower */
F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10,
1, 2, 3, 4, 5, ESC, DEL, 6, 7, 8, 9, 0,
FN3, FN4, TRNS, GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, HOME, PGDN, PGUP, END),
[3] = KEYMAP( /* fn2 raise */
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
FN10, FN11, FN12, FN13, FN14, ESC, DEL, FN15, FN16, FN17, FN18, FN19,
FN3, FN4, TRNS, FN22, FN20, TRNS, TRNS, FN28, FN23, FN24, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, MNXT, VOLD, VOLU, MPLY),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
};

16
keyboard/planck/led.c
View file

@ -22,13 +22,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
void led_set(uint8_t usb_led) void led_set(uint8_t usb_led)
{ {
// if (usb_led & (1<<USB_LED_FUNCTION)) { // // Using PE6 Caps Lock LED
// if (usb_led & (1<<USB_LED_CAPS_LOCK))
// {
// // Output high. // // Output high.
// DDRF |= (1<<0); // DDRE |= (1<<6);
// PORTF |= (1<<0); // PORTE |= (1<<6);
// } else { // }
// else
// {
// // Output low. // // Output low.
// DDRF &= ~(1<<0); // DDRE &= ~(1<<6);
// PORTF &= ~(1<<0); // PORTE &= ~(1<<6);
// } // }
} }

2
keyboard/planck/matrix.c
View file

@ -190,4 +190,4 @@ static void select_row(uint8_t row)
break; break;
} }
} }

202
keyboard/planck/matrix_center.c Normal file
View file

@ -0,0 +1,202 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "action_layer.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCE
# define DEBOUNCE 10
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11
* pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
*/
static void init_cols(void)
{
DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
DDRD &= ~(1<<0);
PORTD |= (1<<0);
DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
}
static matrix_row_t read_cols(void)
{
return (PINB&(1<<0) ? 0 : (1<< 0)) |
(PINB&(1<<1) ? 0 : (1<< 1)) |
(PINB&(1<<2) ? 0 : (1<< 2)) |
(PINB&(1<<3) ? 0 : (1<< 3)) |
(PINB&(1<<7) ? 0 : (1<< 4)) |
(PIND&(1<<0) ? 0 : (1<< 5)) |
(PINF&(1<<7) ? 0 : (1<< 6)) |
(PINF&(1<<6) ? 0 : (1<< 7)) |
(PINF&(1<<5) ? 0 : (1<< 8)) |
(PINF&(1<<4) ? 0 : (1<< 9)) |
(PINF&(1<<1) ? 0 : (1<<10)) |
(PINF&(1<<0) ? 0 : (1<<11));
}
/* Row pin configuration
* row: 0 1 2 3
* pin: B0 B1 B2 B3
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
DDRB &= ~0b01110000;
PORTB &= ~0b01110000;
DDRD &= ~0b10000000;
PORTD &= ~0b10000000;
}
static void select_row(uint8_t row)
{
switch (row) {
case 0:
DDRB |= (1<<6);
PORTB &= ~(1<<6);
break;
case 1:
DDRB |= (1<<5);
PORTB &= ~(1<<5);
break;
case 2:
DDRB |= (1<<4);
PORTB &= ~(1<<4);
break;
case 3:
DDRD |= (1<<7);
PORTD &= ~(1<<7);
break;
}
}

222
keyboard/planck/matrix_pcb.c Normal file
View file

@ -0,0 +1,222 @@
/*
Copyright 2012 Jun Wako
Generated by planckkeyboard.com (2014 Jack Humbert)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "backlight.h" // TODO fix this dependency
#ifndef DEBOUNCE
# define DEBOUNCE 10
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
backlight_init_ports();
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
//
// Planck PCB Rev 1 Pin Assignments
//
// Column: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
// Pin: F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7
//
static void init_cols(void)
{
DDRB &= ~(1<<4 | 1<<0);
PORTB |= (1<<4 | 1<<0);
DDRC &= ~(1<<7);
PORTC |= (1<<7);
DDRD &= ~(1<<7 | 1<<6 | 1<<4);
PORTD |= (1<<7 | 1<<6 | 1<<4);
DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
}
static matrix_row_t read_cols(void)
{
return (PINF&(1<<1) ? 0 : (1<<0)) |
(PINF&(1<<0) ? 0 : (1<<1)) |
(PINB&(1<<0) ? 0 : (1<<2)) |
(PINC&(1<<7) ? 0 : (1<<3)) |
(PINF&(1<<4) ? 0 : (1<<4)) |
(PINF&(1<<5) ? 0 : (1<<5)) |
(PINF&(1<<6) ? 0 : (1<<6)) |
(PINF&(1<<7) ? 0 : (1<<7)) |
(PIND&(1<<4) ? 0 : (1<<8)) |
(PIND&(1<<6) ? 0 : (1<<9)) |
(PINB&(1<<4) ? 0 : (1<<10)) |
(PIND&(1<<7) ? 0 : (1<<11));
}
static void unselect_rows(void)
{
DDRB &= ~(1<<5 | 1<<6);
PORTB |= (1<<5 | 1<<6);
DDRD &= ~(1<<0 | 1<<5);
PORTD |= (1<<0 | 1<<5);
}
//
// Planck PCB Rev 1 Pin Assignments
//
// Row: 0, 1, 2, 3
// Pin: D0, D5, B5, B6
//
static void select_row(uint8_t row)
{
switch (row) {
case 0:
DDRD |= (1<<0);
PORTD &= ~(1<<0);
break;
case 1:
DDRD |= (1<<5);
PORTD &= ~(1<<5);
break;
case 2:
DDRB |= (1<<5);
PORTB &= ~(1<<5);
break;
case 3:
DDRB |= (1<<6);
PORTB &= ~(1<<6);
break;
}
}

Some files were not shown because too many files have changed in this diff Show more