_/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branch 'refs/remotes/jackhumbert/master'

Browse source
This commit is contained in:
di0ib 2016-08-14 13:19:20 -10:00
commit df56d742b1
22 changed files with 1234 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
keyboards/atreus/Makefile
View file

@ -2,11 +2,11 @@
ifdef TEENSY2
OPT_DEFS += -DATREUS_TEENSY2
ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else
OPT_DEFS += -DATREUS_ASTAR
OPT_DEFS += -DCATERINA_BOOTLOADER
ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif
@ -84,5 +84,5 @@ endif
USB ?= /dev/cu.usbmodem1411
upload: build
$(ATRUES_UPLOAD_COMMAND)
$(ATREUS_UPLOAD_COMMAND)

8
keyboards/atreus/keymaps/xyverz/keymap.c
View file

@ -46,14 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_L1] = { /* LAYER 1 */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 },
{KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
{KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
{KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
{KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
},
[_L2] = { /* LAYER 2 */
{KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 },
{KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 },
{KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET }
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS},
{KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 },
{KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
}
};

311
keyboards/ergodox/keymaps/xyverz/keymap.c Normal file
View file

@ -0,0 +1,311 @@
/*
* The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
* software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
* keys. I've decided to continue using this layout with my ErgoDox.
*
* The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional
* keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
*
* I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
* layouts.
*
* For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
* keymap is defined, beginning on line 81.
*
*/
#include "ergodox.h"
#include "debug.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#define _DV 0 // Dvorak layer
#define _QW 1 // Qwerty layer
#define _CM 2 // Colemak layer
#define _MD 3 // Media Layer
#define _KP 4 // Keypad Layer
// Macro name shortcuts
#define DVORAK M(_DV)
#define QWERTY M(_QW)
#define COLEMAK M(_CM)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Dvorak layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - |
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
* | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | LCtr | LAlt | | Ralt | RCtr |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------| Enter| Space|
* | | | End | | PgDn | | |
* `--------------------' `--------------------'
*
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[_DV] = { // layer 0 : Dvorak
// left hand
{KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO },
{KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END },
{KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL },
{KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC},
{KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME},
{KC_5, KC_Y, KC_I, KC_X, KC_NO, KC_LCTL},
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
// right hand
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
{KC_6, KC_F, KC_D, KC_B, KC_NO, KC_RCTL},
{KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP},
{KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC },
{KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT },
{KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN},
{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO }
},
/* Keymap 1: QWERTY layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' |
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
* | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | LCtr | LAlt | | Ralt | RCtr |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------| Enter| Space|
* | | | End | | PgDn | | |
* `--------------------' `--------------------'
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[_QW] = { // layer 1 : QWERTY
// left hand
{KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO },
{KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END },
{KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL },
{KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC},
{KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME},
{KC_5, KC_T, KC_G, KC_B, KC_NO, KC_LCTL},
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
// right hand
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
{KC_6, KC_Y, KC_H, KC_N, KC_NO, KC_RCTL},
{KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP},
{KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC },
{KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT },
{KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO }
},
/* Keymap 2: Colemak layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' |
* |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------|
* | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | LCtr | LAlt | | Ralt | RCtr |
* ,------|------|------| |------+------+------.
* | | | Home | | PgUp | | |
* | BkSp | Del |------| |------| Enter| Space|
* | | | End | | PgDn | | |
* `--------------------' `--------------------'
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[_CM] = { // layer 2 : Colemak
// left hand
{KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO },
{KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END },
{KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL },
{KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC},
{KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME},
{KC_5, KC_G, KC_D, KC_B, KC_NO, KC_LCTL},
{KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT},
// right hand
{KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT},
{KC_6, KC_J, KC_H, KC_K, KC_NO, KC_RCTL},
{KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP},
{KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC },
{KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT },
{KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN},
{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO }
},
/* Keymap 3: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | PrSc | ScLk | Paus | | FN4 | | FN5 | | Mute | Vol- | Vol+ | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | |
* |--------+------+------+------+------+------| FN4 | | FN5 |------+------+------+------+------+--------|
* | | |Dvorak|Qwerty|Colemk| | | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// Media Layer
[_MD] = { // layer 3 : Media layer
// left hand
{RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO },
{KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_F2, KC_PSCR, KC_TRNS, DVORAK, KC_TRNS, KC_TRNS},
{KC_F3, KC_SLCK, KC_TRNS, QWERTY, KC_TRNS, KC_TRNS},
{KC_F4, KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
{KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
{KC_F11, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
// right hand
{KC_F12, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
{KC_F6, KC_TRNS, KC_MSTP, KC_TRNS, KC_NO, KC_TRNS},
{KC_F7, KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_F8, KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_F9, KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_F10, KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }
},
/* Keymap 4: Keypad layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Sleep | | | | | | FN5 | | FN4 | | KP 7 | KP 8 | KP 9 | KP + | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | |
* |--------+------+------+------+------+------| FN5 | | FN4 |------+------+------+------+------+--------|
* | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | KP 0 | | KP . |KP Ent| |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// Keypad Layer
[_KP] = { // layer 4 : Keypad layer
// left hand
{KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO },
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
{KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
// right hand
{KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS},
{KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, KC_TRNS},
{KC_PSLS, KC_P8, KC_P5, KC_P2, KC_NO, KC_TRNS},
{KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, KC_TRNS},
{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO }
},
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _DV:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_DV);
}
break;
case _QW:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_QW);
}
break;
case _CM:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_CM);
}
break;
}
return MACRO_NONE;
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// none
break;
}
};

104
keyboards/phantom/keymaps/xyverz/keymap.c Normal file
View file

@ -0,0 +1,104 @@
#include "phantom.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QW 0
#define _DV 1
#define _CM 2
#define _FL 3
// Macro name shortcuts
#define QWERTY M(_QW)
#define DVORAK M(_DV)
#define COLEMAK M(_CM)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Layer 0: Qwerty */
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
{KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
{KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
},
[_DV] = { /* Layer 1: Dvorak */
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
{KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
{KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
},
[_CM] = { /* Layer 2: Colemak */
{KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS},
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP},
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN},
{KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX},
{KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX},
{KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
},
[_FL] = { /* Layer 3: Functions */
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET, KC_MPRV, KC_MPLY, KC_MNXT},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX},
{_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX},
{QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______},
},
};
enum function_id {
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _DV:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_DV);
}
break;
case _QW:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_QW);
}
break;
case _CM:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_CM);
}
break;
}
return MACRO_NONE;
};

20
keyboards/preonic/keymaps/jacwib/Makefile Normal file
View file

@ -0,0 +1,20 @@
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

8
keyboards/preonic/keymaps/jacwib/config.h Normal file
View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#define FORCE_NKRO 1
#endif

215
keyboards/preonic/keymaps/jacwib/keymap.c Normal file
View file

@ -0,0 +1,215 @@
#include "preonic.h"
#include "action_layer.h"
#include "eeconfig.h"
#include "keymap_nordic.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum preonic_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
BACKLIT
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | + | Bksp |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Esc | Q | W | E | R | T | Y | U | I | O | P | Å |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Tab | A | S | D | F | G | H | J | K | L | Ö | Ä |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| < | Z | X | C | V | B | N | M | . | , | - |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt |AltGr |Lower | Space| Enter|Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = {
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, KC_BSPC},
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AM },
{KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_AE, NO_OSLH},
{KC_LSFT, NO_LESS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_COMM, NO_MINS},
{KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
/* Lower
* ,-----------------------------------------------------------------------------------.
* | | @ | £ | $ | | | { | [ | ] | } | \ | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | |VolUp | | | ~ |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | |LastS |PauseP|NextS | | * |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | |VolDwn| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | |Bspc | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = {
{_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},
{_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)},
{_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}
},
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ! | " | # | ¤ | % | & | / | ( | ) | = | ? | Ins |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Mouse^| | | | |ScrlUp| | | ^ |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | |Mouse<|MouseV|Mouse>| | |MLC |MMC |MRC | ' | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | > | | | | | | |ScrlDown| : | ; | _ |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | |Bspc | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = {
{LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL, NO_QUES, KC_INS},
{_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},
{_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},
{_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},
{_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}
},
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | Reset| | | | | | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | |Rsft |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | |MusOn |MusOff| | | | | | | | | Reset|
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = {
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
{_______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},
{_______, MU_ON, MU_OFF, _______, _______, _______, _______, _______, _______, _______, _______, RESET },
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
}
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = {
{NOTE_B5, 20},
{NOTE_B6, 8},
{NOTE_DS6, 20},
{NOTE_B6, 8}
};
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
persistant_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
};
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
void shutdown_user()
{
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_NOTE_ARRAY(music_scale, false, 0);
}
#endif

3
keyboards/preonic/keymaps/jacwib/readme.md Normal file
View file

@ -0,0 +1,3 @@
# Jacwib's preonic keymap.
Designed for use with a swedish language.

75
keyboards/tv44/Makefile Normal file
View file

@ -0,0 +1,75 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= yes # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
ifndef QUANTUM_DIR
include ../../Makefile
endif

162
keyboards/tv44/config.h Normal file
View file

@ -0,0 +1,162 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEAE
#define PRODUCT_ID 0x8844
#define DEVICE_VER 0x0002
#define MANUFACTURER Evan Sailer
#define PRODUCT TheVan 44
#define DESCRIPTION keyboard firmware for TV44
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

21
keyboards/tv44/keymaps/default/Makefile Normal file
View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

8
keyboards/tv44/keymaps/default/config.h Normal file
View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

97
keyboards/tv44/keymaps/default/keymap.c Normal file
View file

@ -0,0 +1,97 @@
#include "tv44.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QW 0
#define _DV 1
#define _CM 2
#define _L1 3
#define _L2 4
#define _L3 5
// Macro name shortcuts
#define QWERTY M(_QW)
#define DVORAK M(_DV)
#define COLEMAK M(_CM)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
{MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
},
[_DV] = { /* Dvorak */
{KC_TAB, KC_COMM, KC_DOT, KC_SLSH, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_BSPC },
{MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) },
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) },
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
},
[_CM] = { /* Colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC },
{MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) },
{KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) }
},
[_L1] = { /* LAYER 1 */
{KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL },
{_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ },
{_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
{_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
},
[_L2] = { /* LAYER 2 */
{_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ },
{KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT },
{_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ },
{_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
},
[_L3] = { /* LAYER 3 */
{_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ },
{KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ },
{KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ },
{_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ }
}
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _DV:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_DV);
}
break;
case _QW:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_QW);
}
break;
case _CM:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_CM);
}
break;
}
return MACRO_NONE;
};

1
keyboards/tv44/keymaps/default/readme.md Normal file
View file

@ -0,0 +1 @@
# The default keymap for tv44

21
keyboards/tv44/keymaps/xyverz/Makefile Normal file
View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

8
keyboards/tv44/keymaps/xyverz/config.h Normal file
View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

92
keyboards/tv44/keymaps/xyverz/keymap.c Normal file
View file

@ -0,0 +1,92 @@
#include "tv44.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#define _DV 0
#define _QW 1
#define _CM 2
#define _L1 3
#define _L2 4
// Macro name shortcuts
#define DVORAK M(_DV)
#define QWERTY M(_QW)
#define COLEMAK M(_CM)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DV] = { /* 0: Dvorak */
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC },
{MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT },
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT },
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
},
[_QW] = { /* 1: Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
{MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT },
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
},
[_CM] = { /* 2: Colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC },
{MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT },
{KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
},
[_L1] = {/* 1: FN 1 */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL },
{_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ },
{_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
{KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
},
[_L2] = { /* 2: FN 2 */
{KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC },
{_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT },
{_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ },
{QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
}
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _DV:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_DV);
}
break;
case _QW:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_QW);
}
break;
case _CM:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_CM);
}
break;
}
return MACRO_NONE;
};

1
keyboards/tv44/keymaps/xyverz/readme.md Normal file
View file

@ -0,0 +1 @@
# The default keymap for tv44

28
keyboards/tv44/readme.md Normal file
View file

@ -0,0 +1,28 @@
tv44 keyboard firmware
======================
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
```
$ make keymap=[default|jack|<name>]
```
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

28
keyboards/tv44/tv44.c Normal file
View file

@ -0,0 +1,28 @@
#include "tv44.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

22
keyboards/tv44/tv44.h Normal file
View file

@ -0,0 +1,22 @@
#ifndef TV44_H
#define TV44_H
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The following is an example using the Planck MIT layout
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K37, K38, K39, K3B \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
{ K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \
#endif

2
quantum/process_keycode/process_unicode.c
View file

@ -13,7 +13,7 @@ uint16_t hex_to_keycode(uint8_t hex)
}
}
void set_unicode_mode(uint8_t os_target)
void set_unicode_input_mode(uint8_t os_target)
{
input_mode = os_target;
}