1
0
Fork 0

Remove apostrophe from various abbreviations' plural forms (#7050)

While this was historically a valid possibility, nowadays, it reads
kinda weird, and the [Oxford Dictionaries Online suggests to avoid it](https://english.stackexchange.com/a/56010).

Thus, I removed it everywhere I found it.
This commit is contained in:
Max Rumpf 2019-10-22 14:47:43 +02:00 committed by Joel Challis
parent 2ee961c9e8
commit f87908228a
4 changed files with 9 additions and 9 deletions

View file

@ -1,6 +1,6 @@
# Keyboards with AVR Processors # Keyboards with AVR Processors
This page describes the support for for AVR processors in QMK. AVR processors include the atmega32u4, atmega32u2, at90usb1286, and other processors from Atmel Corporation. AVR processors are 8-bit MCU's that are designed to be easy to work with. The most common AVR processors in keyboards have on-board USB and plenty of GPIO for supporting large keyboard matrices. They are the most popular MCU for use in keyboards today. This page describes the support for for AVR processors in QMK. AVR processors include the atmega32u4, atmega32u2, at90usb1286, and other processors from Atmel Corporation. AVR processors are 8-bit MCUs that are designed to be easy to work with. The most common AVR processors in keyboards have on-board USB and plenty of GPIO for supporting large keyboard matrices. They are the most popular MCU for use in keyboards today.
If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_guidelines.md) to get a sense of how keyboards fit into QMK. If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_guidelines.md) to get a sense of how keyboards fit into QMK.

View file

@ -20,7 +20,7 @@ Support for SSD1306 based OLED displays. For more information see the [OLED Driv
## uGFX ## uGFX
You can make use of uGFX within QMK to drive character and graphic LCD's, LED arrays, OLED, TFT, and other display technologies. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. You can make use of uGFX within QMK to drive character and graphic LCDs, LED arrays, OLED, TFT, and other display technologies. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process.
## WS2812 (AVR Only) ## WS2812 (AVR Only)

View file

@ -1,16 +1,16 @@
# Glossary of QMK Terms # Glossary of QMK Terms
## ARM ## ARM
A line of 32-bit MCU's produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI. A line of 32-bit MCUs produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI.
## AVR ## AVR
A line of 8-bit MCU's produced by [Atmel](http://www.microchip.com/). AVR was the original platform that TMK supported. A line of 8-bit MCUs produced by [Atmel](http://www.microchip.com/). AVR was the original platform that TMK supported.
## AZERTY ## AZERTY
The standard Français (French) keyboard layout. Named for the first 6 keys on the keyboard. The standard Français (French) keyboard layout. Named for the first 6 keys on the keyboard.
## Backlight ## Backlight
A generic term for lighting on a keyboard. The backlight is typically, but not always, an array of LED's that shine through keycaps and/or switches. A generic term for lighting on a keyboard. The backlight is typically, but not always, an array of LEDs that shine through keycaps and/or switches.
## Bluetooth ## Bluetooth
A short range peer to peer wireless protocol. Most common wireless protocol for a keyboard. A short range peer to peer wireless protocol. Most common wireless protocol for a keyboard.
@ -147,7 +147,7 @@ A feature that lets you assign multiple keycodes to the same key based on how ma
A low-cost AVR development board that is commonly used for hand-wired builds. A teensy is often chosen despite costing a few dollars more due to its halfkay bootloader, which makes flashing very simple. A low-cost AVR development board that is commonly used for hand-wired builds. A teensy is often chosen despite costing a few dollars more due to its halfkay bootloader, which makes flashing very simple.
## Underlight ## Underlight
A generic term for LEDs that light the underside of the board. These LED's typically shine away from the bottom of the PCB and towards the surface the keyboard rests on. A generic term for LEDs that light the underside of the board. These LEDs typically shine away from the bottom of the PCB and towards the surface the keyboard rests on.
## Unicode ## Unicode
In the larger computer world Unicode is a set of encoding schemes for representing characters in any language. As it relates to QMK it means using various OS schemes to send unicode codepoints instead of scancodes. In the larger computer world Unicode is a set of encoding schemes for representing characters in any language. As it relates to QMK it means using various OS schemes to send unicode codepoints instead of scancodes.

View file

@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
keyboard_task(); keyboard_task();
``` ```
This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off. This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LEDs on and off.
Within `keyboard_task()` you'll find code to handle: Within `keyboard_task()` you'll find code to handle:
@ -30,7 +30,7 @@ Within `keyboard_task()` you'll find code to handle:
* Mouse Handling * Mouse Handling
* Serial Link(s) * Serial Link(s)
* Visualizer * Visualizer
* Keyboard status LED's (Caps Lock, Num Lock, Scroll Lock) * Keyboard status LEDs (Caps Lock, Num Lock, Scroll Lock)
#### Matrix Scanning #### Matrix Scanning
@ -175,7 +175,7 @@ FIXME: This needs to be written
FIXME: This needs to be written FIXME: This needs to be written
#### Keyboard state LED's (Caps Lock, Num Lock, Scroll Lock) #### Keyboard state LEDs (Caps Lock, Num Lock, Scroll Lock)
FIXME: This needs to be written FIXME: This needs to be written