* Check the size of the SET_REPORT packet
If we have two bytes, that probably means the first is a report ID. The 6KRO interface may or may not have one, but the NKRO interface always does, so we need to check this regardless of whether KEYBOARD_SHARED_EP is defined.
* Fix indentation
* adds proton c base
* fixes custom matrix include
* adds readme.md
* initial proton coversion, no pin mapping
* start of mcu selection
* add pin mapping and sweet16 test
* add at90 to list
* disable backlight, fix d7
* update flag names
* doc updates
* proton c update for mcu selection
* initial prime_o commit
* Cleaned up comments, other things.
* Update bakingpy 4x12 keymap and add test mode for debugging/development (#4810)
* Keymap: ave-63's iris layout (#4812)
* Updated keymap to use standard seven-underscore KC_TRNS notation
* initial prime_o commit
* Cleaned up comments, other things.
* Updated keymap to use standard seven-underscore KC_TRNS notation
* Downbubble: Configurator fix
Fix the visual key alignment and some typos.
* Downbubble: refactor
Rename layout macros:
- LAYOUT_downbubble_standard to LAYOUT_standard
- LAYOUT_downbubble_splitbackspace to LAYOUT_split_bs
- LAYOUT_downbubble_splitrightshift to LAYOUT_split_rshift
- LAYOUT_downbubble_splitnumpad to LAYOUT_split_numpad
- LAYOUT_downbubble_spliteverything to LAYOUT_all
* Remove unused UNICODE(n) macro, update docs
* Add note about max length of unicode_map to docs
* QK_UNICODE_MAP → QK_UNICODEMAP
* Refactor process_unicode_map
* process_unicode_map → process_unicodemap
This is done for consistency: UNICODEMAP is the method (hence UNICODEMAP_ENABLE, process_unicodemap), whereas unicode_map is the mapping table itself.
* Update references and ordering in docs/understanding_qmk
* Add additional note to docs/understanding_qmk
* &unicode_map[index] → unicode_map + index
This avoids the issue of the compiler sometimes complaining about the array index being out of range
* Update docs/getting_started_make_guide
* Update method sections in docs/feature_unicode
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.
* initial commit, this now mostly works
- RGB controls work
- Dynamic keymap still broken due to eeprom
- Via works
* STM32 eeprom update
- Update EEPROM emulation library to handle 8bit data like AVR.
- This library also allows for multiple page pairs resulting in greater EEPROM size flexibility
* hs60 changes
* HS60 hhkb added
* Update keyboards/hs60/v2/config.h
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Fractal: layout macro cleanup
Removed KEYMAP alias for LAYOUT_preonic_mit. Alias was unused, and the terminology usage is deprecated.
* Fractal: readme cleanup
Updated the line containing the documentation links in the readme.
* Fractal: disable preonic_mit community layout
QMK doesn't have a preonic_mit community layout at this time.
Disables preonic_mit as an option for community layout. Can be re-enabled when the layout is added.
* Numbrero: fix Configurator mismatch
Key object order in info.json didn't match the layout macro, leading to keys being assigned out-of-sequence.
* Numbrero: tidy
- white space changes in numbrero.h (alignment/readability/QMK conventions)
- minor changes to readme.md (grammar, mostly)
* Tradestation: tidy code
- correct JSON syntax on info.json
- visual key alignment on info.json
- white space changes on rules.mk and tradestation.h (readability/QMK conventions)
* Tradestation: readme refactor
Modify readme.md to more closely match QMK template.
* Tradestation: readme update
Update The Board podcast link for libsyn.
* S65-X: remove S65-Plus support
The original QMK codebase for the Sentraq S65-X actually supported both the S65-X and the S65-Plus. In the interim, the S65-Plus has been broken off into its own directory.
This commit removes support for the S65-Plus from the `keyboards/s65_x/` directory, as that code has been superseded by the code in the S65-Plus directory (`keyboards/s65_plus/`).
- deleted S65-Plus layout macros from s65_x.h and info.json
- deleted s65plus keymap directory
- removed references to the unused column pins
- removed the two unused columns for the switch matrices
- renamed switch K300 in LAYOUT_ansi to K301 (reflects matrix position)
- renamed switch K214 in LAYOUT_iso to K114 (reflects matrix position)
* S65-X: keymap refactor
- all keymaps now use #include QMK_KEYBOARD_H
- default and iso keymaps refactored for readability
- deleted redundant KC_TRNS and KC_NO keycode definitions from smt keymap
* S65-X: readme update
- updated Hardware Availability link
- updated Docs links
* S65-Plus: add LAYOUT_iso data
Adds LAYOUT_iso macro to s65_plus.h and info.json, and an ISO layout version of the default keymap.
* S65-Plus: refactor default keymap
- refactor for alignment/readability
- removed fn_actions code block
- add empty process_record_user block
* S65-Plus: readme update
- Hardware Availability link is now a hyperlink
- updated Docs links
* S65-X: enable 65_ansi and 65_iso community layouts
Thi commit allows the Sentraq S65-X to use the 65_ansi and 65_iso community layouts.
- LAYOUT_ansi renamed to LAYOUT_65_ansi
- LAYOUT_iso renamed to LAYOUT_65_iso
- added LAYOUTS rule to rules.mk
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Use standard KC_ALGR, remove language-specific redefinitions
* Use ALGR instead of ALTGR in BÉPO and Canadian multilingual keymaps
* Remove BE_LALT, BE_LGUI aliases
* adding default settings to support 3v ERM vibration motors
* set default settings of haptic motor for LV061228B-L64-A 2v LRA
* update ishtob keymap and fix config settings
* Bocaj Layout Revamp
* Pull in Upstream (#1)
* Various tweaks for some Input:Club build processes
* change KEYMAP to LAYOUT for all new keyboards made using this script
* Add support for rev3 of the Atom47 (#2672)
* Added support for rev3 of the Atom47
* Updated Atom47 readme's
* Fix redefine error on rev2 and add maartenwut's keymap
* Fix redefine error on LEdiodes keymap
* Add Nyquist keymap (#2692)
* nyquist
* danielhklein nyquist setup
* shift left controls
* remove readme
* cleanup before pr
* ready for pr
* Adds Phantom TKL support (#2696)
* Add an info.json to phantom keyboard
* Add layouts
- KEYMAP_WINKEYLESS
- KEYMAP_7BIT
- KEYMAP_ISO
- KEYMAP_ISO_WINKEYLESS
* Add key_counts
* Add 2 missing F-Row keys
* Add TKC1800 info.json
Created an info.json for the tkc1800.
* Clueboard 60 info.json
- adds
- LAYOUT_60_ansi
- LAYOUT_60_iso
- KEYMAP_AEK
- KEYMAP
- LAYOUT_60_ansi_split_bs_rshift
* Add the Speedo keyboard
* Fix KC60 info.json file (#2707)
* change KEYMAP to LAYOUT in all the KC60 files
* Redo the info.json file
* Small fixes to TKC1800
- adjust F-row to use 0.25 spacing
- split left shift
- add key_count
* Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708)
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* Improve state/chord handling and clean up namespace
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk
* Readd the kbd75 maintainer
* Remove obsolete info.json entries (#2712)
* Clean up some long-standing errors when populating the API (#2715)
* More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Normacos keymap for let's split keyboard (#2691)
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* hhkb jp personal keymap (#2698)
* Add JJ40 Cockpit personal keymap (#2713)
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718)
* add readme to ktype keyboard
* add readme to m10a
* add readme to mini1800
* add readme to parent directory
* Revert "Pull in Upstream (#1)"
This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45.
* Updates to Bocaj Files
- Gave up on Tap Dance for ' -> '
+ Added another 'Secret'
+ Add ' -> ' to the Swap Hands key
+ Add Swap Hands to the ' -> ' key
+ Made Hand Swapping a momentary toggle
- Removed Auto Shift
+ Added Layer Toggle to KC_QUOTE for the _TOOLS layer
- Disabled Tap Dance
* Merge remote-tracking branch 'upstream/master'
* Updates to Bocaj
Added Game Layers, Removed Unused Macros
* Removed 'secrets.h'
* Updates to Bocaj
Remove 'secrets'.
Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues
* Total revisioning of keymap and layout structure
* Missed readme.md file
* Bocaj - Permissive Hold setting enabled
* Switching from ErgoDox EZ centric configuration to the layout/user approach
* Bocaj - Create Userspace and Ergodox layout
* Update settings.json
* Pushing local updates
* Reverting .vscode/settings.json
* Adds pretty_osx and _win wrappers
* Utilize Windows and Mac Wrappers
* Update layouts/community/ergodox/bocaj/keymap.c
* Updates to Bocaj keymap.c
- Extended pretty_osx and pretty_win wrappers to allow modification of the bottom rows and thumb clusters.
- Fixed already wrapped layouts to align with the change
- Wrapped _NUMS and _CLICKY layers with the _osx wrapper because I main with a Mac
* Updates to Bocaj
Small documentation updates, added KC_MAKE from Drashna's layout, added KC_LOCK back to the diablo layer.
* Add LShift to _Adjust layer
* Minor changes to bocaj
Put wrappers in userspace and added RESET keycode to the Adjust layer
* Updates to Bocaj config & keymap; Fixed problem with process_leader.c
- Made lots of changes to the bocaj layout and userspace
- Pulled in latest upstream/master
- Attempted to compile with latest and found an unneccessary `break` in process_leader.c
* Bocaj - Updates to Layout and Userspace
* Adjust LEADER_TIMEOUT to 350
* Put KC_GRAVE on _ADJUST layer
* Eliminate _LOWER layer and associated definitions
* Adjusted layer indicating LEDs to match changes
* Fixed Diablo leader sequence
* Added build info leader sequence
* Got rid of obsoleted IGNORE_MOD_TAP_INTERRUPT/PERMISSIVE_HOLD/PREVENT_STUCK_MODIFIERS (may add STRICT_LAYER_RELEASE in the future)
* Remove type_traits
Not sure what in my VSCode config always brings this one in
* refactor stage 1
* Bocaj Refactor Phase II
* Made LED_2 brighter if both CTRL & GUI are being held
* Enabled unicode because I got it to work in Mac OS
* Finalized Build Info leader combination after testing in Mac OS
* Not sure why KC_D3_1 was set to ASDF if !TAP_DANCE_ENABLE. So I changed that back
* Experienced issues with `EXTRAFLAGS += -flto` using Docker in MacOS. Not sure what it does, but I don't seem to be missing anything
* Wrote obligatory readme.md files and mentioned Drashna too many times... I don't think I can actually take credit for much of anything here.
* Updates to Bocaj
Made LED changes, added LM_DFLT which is similar to the grave macro, enabled retro tapping, working on a unicode idea -- currently fails to build.
* Bocaj Refactor Phase 3 Part 2
- Continuation of implementing unicode switching based on default layer
- Slight adjustments to _DIABLO and base wrapper because LM_DFLT macro didn't function as I'd hoped
* Slight adjustment to KC_MAKE
* Added my Mechmini2 layout to qmk.
* Added more info to the readme.
* Made changes.
* Update keyboards/mechmini/v2/keymaps/lbibass_625_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Update keyboards/mechmini/v2/keymaps/lbibass_split_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Added brightness and volume controls to MechMini 625 layout.
