1
0
Fork 0
Commit graph

917 commits

Author SHA1 Message Date
mtei
9f8c8c53a5 add RGBLIGHT_SPLIT_SET_CHANGE_MODEHSVS; to rgblight_update_dword() 2019-04-24 12:52:15 -07:00
mtei
5312131d35 add RGBLIGHT_SPLIT_SET_CHANGE_MODEHSVS; to eeconfig_update_rgblight_default() 2019-04-24 12:52:15 -07:00
Rockman18
479baf98e0 [FIX] Misspelled RGB_YELLOW (#5692) 2019-04-23 19:27:29 -07:00
M-AS
bb52119a6d RGB Matrix Animations: Three/six new reactive effects (wide, cross, nexus) (#5602)
* added 3 new RGB_Matrix effects

* made cross effect behavior smoother

* removed dead code

* added effect descriptions
2019-04-22 08:37:40 -07:00
Brice Figureau
b61baf4281 Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.

The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.

This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.

Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.

This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.

Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.

Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.

Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 08:34:13 -07:00
Erovia
066818f5f9 Define RGB colors (#5300)
* Define RGB colors

Define RGB colors and pass them to the rgblight functions, instead of
defining multiple macros.

* Add new color definitions support for RGB Matrix

* Add/clarify info about new color definitions in Docs

* Add deprecation warning banner to rgblight_list.h
2019-04-22 08:26:41 -07:00
Ryan Caltabiano
0a645225b9 OLED Driver Feature 2019-04-20 08:05:10 -07:00
Takeshi ISHII
7e67bd791b Change split_common to use RGBLIGHT_SPLIT (#5509)
* add I2C_slave_buffer_t to quantum/split_common/transport.c

Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results.

* add temporary pdhelix(Patched Helix) code

* temporary cherry-pick from #5020

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* add post_config.h support to build_keyboard.mk

* add quantum/rgblight_post_config.h, quantum/split_common/post_config.h

Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk.

quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined.

quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C.

* Change split_common's transport.c I2C to use the synchronization feature of rgblight.c

* Change split_common's transport.c serial to use the synchronization feature of rgblight.c

* test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix

* Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix"

This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98.

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3)
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default

* Test End, Revert "temporary cherry-pick from #5020"

This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0.

* Test End, Revert "add temporary pdhelix(Patched Helix) code"

This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660.

* temporarily cherry-pick from #5020 to see if it passes the travis-ci test.

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test."

This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f.

* update docs/config_options.md

* update split_common/transport.c, improves maintainability of serial transaction IDs.

No change in build result.

* temporary cherry-pick from #5020

* fix build fail keebio/iris/rev3:default

* fix build fail lets_split_eh/eh:default

* Revert "temporary cherry-pick from #5020"

This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947.

* temporary cherry-pick from #5020 (0.6.336)

* Revert "temporary cherry-pick from #5020 (0.6.336)"

This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c.

* temporary cherry-pick from #5020 (0.6.336)
2019-04-19 15:25:08 -07:00
Takeshi ISHII
dfab177f88 Add function to support split-keyboard in rgblight.[ch]. (#5020)
* add temporary file that is rgblight.c call graph

* add rgblight_update_hook()

* update rgblight-call-graph.dot (temporary file)

* add more hook point

* add TODO comment

* temporary Revert "add TODO comment"

This reverts commit df6165aac9b3a31d1d3e31ce52aadc134b84eac2.

* temporary Revert "add more hook point"

This reverts commit 64592b06f3bcdaac47c59f922018a273bef76776.

* temporary Revert "add rgblight_update_hook()"

This reverts commit 432b74c912ed4333e6633e20a1bcda10c6a10eaf.

* add rgblight_update_hook()

* add more hook point

* add TODO comment

* implement rgblight_update_hook()

* remove rgblight_update_hook(), add RGBLIGHT_SPLIT_SET_CHANGE_XXXX

rgblight_update_hook() is too large.
change to simple flag setting.

* shrink rgblight_config_t

* implement rgblight_update_sync()

Note: The animation synchronization process has not been implemented yet.

* update quantum/rgblight-call-graph.dot (temporary file)

* rmove quantum/rgblight-call-graph.dot (temporary file)

* update rgblight.c

* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .

* fix build break rgblight_update_sync() when all animation off

* fix quantum/rgblight.c:rgblight_disable_XX() add RGBLIGHT_SPLIT_SET_CHANGE_MODE

* quantum/rgblight.c change code order: move rgblight_update_sync()

* add mode_base_table[] to quantum/rgblight.c

* quantum/rgblight.c use mode_base_table[] and rgblight_status.base_mode

* quantum/rgblkght.c animation timer integration

* quantum/rgblkght.c add animation sync for split keyboard

* fix mode_base_table[] and snake effect

* fix build break keyboards/mxss.

keyboards/mxss's local rgblight.c need old version rgblight.h

* rgblight.c: fix animation sync

* quantum/rgblight.c: fix snake effect sync

* quantum/rgblight.c: animation sync interverl 30 sec

* quantum/rgblight.c: fix rgblight_effect_rainbow_swirl() and rgblight_effect_knight()

* quantum/rgblight.c: add macro RGBLIGHT_SPLIT_ANIMATION

* cherry-pick from 'rgblight_modes.h sample implementation'

* fix RGBLIGHT_SPLIT_ANIMATION check position

* Update temporary code in Helix keyboard 'five_rows' keymap to test rgblight.c

* Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled.

* Changed to rgblight_sethsv_eeprom_helper() for easier reading.

* add fail-safe code to quantum/rgblight.c:rgblight_task(),rgblight_timer_enable()

* remove temporary code in Helix keyboard 'five_rows' keymap

* quantum/rgblight.c: add split-keyboard master side sync functions

add functions:
  uint8_t rgblight_get_change_flags(void);
  void rgblight_clear_change_flags(void);
  void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo);

change function:
  void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom);

* Change rgblight_update_sync() to use write_to_eeprom.

* remove TODO comment from quantum/rgblight.h

* Revert "fix build break keyboards/mxss."

This reverts commit 90b9a1aa7d8af226751500e49e3ea0214cc4e024.
(Separated this change into the newly opened PR #5461.)

* Revert "Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled."

This reverts commit b61004e63e82cf5334cee4def4ba10cffa88885f.

* update quantum/rgblight.c: Code size reduction when not using RGBLIGHT_SPLIT.

* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .

* add temporary pdhelix(Patched Helix) code

* Add temporary code to split_common/transport.c to test rgblight.c.

* Finish testing rgblight.c with helix keyboard.

Revert "Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c ."

This reverts commit 0bf81a4723a977adc0cb09b4272ee5c9b4f2bbbb.

* Finish testing rgblight.c with quantum/split_common code.

Revert "Add temporary code to split_common/transport.c to test rgblight.c."

This reverts commit 71db3e24eef40d4c455fb9fd1664e4487c9d927a.

* remove temporary pdhelix(Patched Helix) code

This reverts commit 5287e51a394741bcb6028c7cfc0dd0c984645f76.

* Added description of RGBLIGHT_SPLIT macro to docs/feature_rgblight.md.

* add RGBLIGHT_SPLIT_SET_CHANGE_HSVS to rgblight_init()

* Changed to restart animation only when changing mode.

When changing hue, sat and val, the animation is not restarted and continues.
2019-04-19 15:05:51 -07:00
Mike Roberts
b60413af60 Use auto output for Adafruit BLE (#4131)
* use auto for adafruit ble

* spacing

* switch ifdef name
2019-04-19 13:07:35 -07:00
Alex Ong
7a1086e405 [core] Fix for eager_pr #5643
Added extra transfer_matrix_values() call whenever counters don't need updating
2019-04-18 15:45:36 -07:00
Alex Ong
d0fb7005d5 Eager pk/pr optimization (#5621)
* Optimizations to eager_pk

* eager_pr also uses changed boolean now.
2019-04-15 12:58:03 -07:00
XScorpion2
5fcd744ddb Features/ws2812 matrix driver (#5418)
* WS2812 driver implementation for RGB Matrix

* Added driver configuration docs
2019-04-14 17:50:35 -07:00
Bob
02b74d521b fix combo enabling logic (#5610) 2019-04-14 11:02:41 -07:00
Drashna Jaelre
a6857d18e1 Change table names 2019-04-12 14:07:05 -07:00
Drashna Jaelre
1d7a06a0a2 Cleanup code 2019-04-12 14:07:05 -07:00
Drashna Jaelre
e88530af79 Make send_char multilined for readaability
So future us' will thaank us
2019-04-12 14:07:05 -07:00
Drashna Jaelre
7148c0b10c Clean up some of the code 2019-04-12 14:07:05 -07:00
Drashna Jaelre
a2090d5e86 Add AltGr/RALT support to Send String 2019-04-12 14:07:05 -07:00
noroadsleft
2df82514ab Update ps2avrgb readme template (#5584)
- fix markdown formatting on macOS instructions (close code block)
- update package install commands
  - set python3
  - use pip3 to install pyusb
  - fix typo (extra backtick on bootloadhid package install line)
- update Keyboard Maintainer line (now unified with AVR template)
2019-04-11 15:39:40 -07:00
zvecr
0137b02319 Port DIRECT_PINS from split_common/matrix.c to matrix.c (#5091)
* Port DIRECT_PINS from split_common/matrix.c to matrix.c

* Reorder matrix.c to remove foward declaration and match split_common/matrix.c

* Refactor nano to use DIRECT_PINS

* Reorder matrix.c to remove foward declaration and match split_common/matrix.c

* Add DIRECT_PINS documentation

* Reorder matrix.c to remove foward declaration and match split_common/matrix.c - fix logic from inherited from split_common

* Add DIRECT_PINS documentation - review comments
2019-04-11 11:51:55 -07:00
Jack Humbert
fa4052c26e Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance

* Updating effect function api for future extensions

* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary

* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain

* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes

* fix bug in quantum/rgb_matrix_drivers.c

Co-Authored-By: jackhumbert <jack.humb@gmail.com>

* update command setting to the correct default

* correct rgb config

* remove commented-out lines

* update docs for the 3737

* Update docs/feature_rgb_matrix.md

Co-Authored-By: jackhumbert <jack.humb@gmail.com>
2019-04-08 16:57:43 -07:00
Bob
bc536b9b6d Switch process_combo to using global register and timer (#2561)
Since combos keep local state about what keys have been previously pressed, when combos are layered, multiple keypresses will register for any key with multiple combos assigned to it. In order to fix this, I switched process_combo to use a global keycode / keyrecord register and timer. When a keypress is consumed by a combo, it gets stored in the register and the timer is updated; when the next keypress takes too long or a key is pressed that isn't part of any combo, the buffer is emitted and the timer reset. This has a few side effects. For instance, I couldn't _not_ fix combo keys printing out of order while also fixing this bug, so combo keys print in order correctly when a combo fails. since combos no longer have local timers, the logic around when combos time out has changed. now that there is a single timer pressing any combo key (including one in a different combo) will reset the timer for all combos, making combo entry a little more lenient. Since combos no longer have local keycode / keyrecord state, there is an edge case where incomplete combo keys can be consumed. if you have a combo for a+s = tab and a combo for b+n = space, if you press a+b+n, only a space will be emitted. This is because when b+n completes successfully, it drops the register.
2019-04-08 14:07:15 -07:00
zvecr
91b18e263f [Keyboard] Refactor jj40 to current standards (#5574)
* Refactor jj40 in line with current ps2avrgb template

* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID

* Add backlight pwm bodge till #4324 lands

* Increase planck keymap compatibility
2019-04-08 10:53:15 -07:00
Drashna Jaelre
908966bdf3
Fixed tap/down/up handling in dynamic keymap macros (#5363)
* Fixed tap/down/up handling in dynamic keymap macros

* Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODE
2019-04-07 19:19:00 -07:00
Lenbok
2ffa4798a4 Fix bugs that cause compile failures when enabling only some animations. 2019-04-06 10:59:25 -07:00
Drashna Jaelre
5701b75e3c Custom Tapping Term per key (#5009)
* Add customizable tapping terms

* Add Documentation

* Fix function

* Fixes

* It's not a pointer

* Add debugging output

* Update documentation to be at least vaguely accurate

* Use `get_tapping_term(tapping_key.event)` instead

`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.

However `tapping_key.event` actually gives the correct column and row information.  It appears be the correct structure to use. 

In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h

* Use variable tapping term value rather than define

* Silly drashna - tapping_key.event, not event

* add get_event_keycode() function

* Fix typo

Co-Authored-By: drashna <drashna@live.com>

* Remove post_process_record_quantum since it's the wrong PR

* Update quantum/quantum.c

Co-Authored-By: drashna <drashna@live.com>

* Better handle ifdef statement for permissive hold

Since we can't be sure that tapping term is actually 500

* Update quantum.c comments based on feedback

* Clean up get_tapping_term function

Clean up function so that users don't need to call the event function, and instead only check the keycode

* Add ability to run functionality on and off

* Make ifdef's more compact
2019-04-05 15:47:25 -04:00
James Churchill
4c1760883e Update ps2avrgb template to use standard matrix/i2c code (#4957)
* Update ps2avrgb template to use standard matrix/i2c code

* Default to an 8x11 matrix in the ps2avrgb template
2019-04-05 09:20:43 -07:00
Daniel Prilik
763b26cdb9 RGB Matrix support for Massdrop CTRL/ALT (#5328)
* port Massdrop CTRL/ALT to use RGB Matrix

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>

* Massdrop lighting support working

This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.

* Updating config based on testing results with patrickmt & compile errors

* Updates for PR5328

For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.

* remove prilik keymap form PR
2019-04-03 18:30:47 -07:00
XScorpion2
63177760de Added encoder support to split common code (#5477)
* Added slave encoder support to split common

* Fixing handwired/xealous/rev1 compile error

* Removed unnecessary ifdef
2019-04-03 16:01:17 -07:00
Alex Ong
17e7762de7 Eager Per Row Debouncing added (added to Ergodox) (#5498)
* Implemented Eager Per Row debouncing algorithm.

Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical)

* Added documentation for eager_pr

* Ported ergodox_ez to eager_pr debouncing.

* Removed check for changes in matrix_scan.

* Added further clarification in docs.

* Accidental merge with ergodox_ez

* Small cleanup in eager_pr

* Forgot to debounce_init - this would probably cause seg-faults.
2019-04-03 14:45:55 -07:00
XScorpion2
c98247e3dd RGB Matrix Overhaul (#5372)
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance

* Updating effect function api for future extensions

* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary

* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
2019-04-02 17:24:14 -07:00
DDRnJn
61b2f2b16e Added some new songs (#5525)
Added Fantasie Impromptu and Nocturne Op. 9 No. 1 in B flat minor by Chopin
Added Isabella's Lullaby from The Promised Neverland
Added Renai Circulation and Platinum Disco from Monogatari
Added Terra's theme from Final Fantasy 6
2019-04-02 11:51:28 -07:00
Wilba6582
d15bb05c93 Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODE 2019-03-30 14:24:13 +11:00
Brian Choromanski
3f4d706c98 Fixing dead links (#5503)
* Fixed typo of 'confid.h' to 'config.h'

* Fixed broken links in docs

* Fixed a lot of dead links

* Removed all dead links that I could not find a replacement for

* Placed knops links back in

* Fixed plank keymaps so that they will compile for planck light

* Https doesn't work on knops.io

* tv44:budi now compiles

* s60_x:amnesia0287 now compiles

* Fixed allocation of key_combos so that narze keymap for planck can compile correctly

* Disabled rgb on ergodone and infinity

* Enabled tap dance so it compiles

* Added return statement so it compiles

* If compiling on light disable extra functionality

* Properly redefined variable so it compiles

* Remove remaining dead links
2019-03-29 06:20:25 -07:00
DDRnJn
b90df560f8 Added songs from Nier and Nier Automata
Added song of the ancients and kaine salvation fron Nier
Added Amusement park, Copied city, Vague Hope cold rain and weight of the world from Nier Automata
2019-03-24 17:13:07 -07:00
Danny
f077204fae Add support for RGB LEDs wired directly to each half's controller (#5392)
* Add support for wiring RGB LEDs for both halves directly to their respective controllers

RGB LEDs for each half don't need to be chained together across the TRRS cable with this

* Add split RGB LED support for serial

* Update config/rules for bakingpy layout

* Un-nest ifdefs for hand detection

* Read RGB config state from memory instead of EEPROM for serial updates

* Reuse existing LED pointer instead of creating new one
2019-03-23 17:20:14 -07:00
Takeshi ISHII
f7fd7f67bd rgblight.c: add remap feature (#5243)
* rgblight.c: add RGBLIGHT_LED_MAP support

* add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP

* Test end. Revert "add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP"

This reverts commit e7488d6f7338460b533d7d19a09deccb011000bf.

* update docs/feature_rgblight.md

* led_map[] move to PROGMEM
2019-03-20 16:55:24 -07:00
James Churchill
cd696ed3d1 Fix i2c splits with >8 columns (#5454) 2019-03-20 07:43:36 -07:00
M-AS
221ac2eabb New RGB Matrix effect: Single color reactive (#5330)
* Adds new RGB Matrix effect: rgb_matrix_config'd reactive LEDs

* [Docs] Adds disable for new effect

* [Docs] Added new effect to list of effects
2019-03-17 10:38:51 -07:00
cubimon
f9f0a31904 Unicode fix for new wincompose version (#5082)
* unicode fix for new wincompose version

* move wincompose case to linux

* Change unicode input end to enter
2019-03-17 10:35:14 -07:00
DDRnJn
fcc9b4b8e7 Added 4 new songs to song_list.h
Added Liebesleid by Kriesler (or Rachmaninoff), Michishirube from Violet Evergarden, Melodies of Life from Final Fantasy 9 and Eyes on Me from Final Fantasy 8
2019-03-17 10:17:12 -07:00
Len Trigg
9c4424ae2c rgblight split transfer non-eeprom config (#5396)
* Make rgblight_update_dword not update eeprom (we already have
eeconfig_update_rgblight for that).

Make split i2c keyboards transfer active rgblight config rather than
eeprom saved version of rgblight config, enabling runtime changes
that aren't persisted to eeprom.

* prev_level and prev_rgb only store successfully transmitted values
2019-03-15 13:46:49 -07:00
Takuya Urakawa
2f3dbb1253 Add new keyboard Plaid and ATMEGA328p support (#5379)
* add plaid

* Change usb vid/pid to free id from vusb
Trivial fix for vusb core

* update readme

* update info.json default keymap

* fix typo

* Replace copyright
2019-03-12 11:48:17 -07:00
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
DDRnJn
fe89aef774 Add 3 new songs and add new note type (#5351)
* Added 3 new songs and added new note type to musical_notes.h

Added Megalovania from Undertale, Kataware Doki from Kimi no Na Wa and La Campanella by Lizst to song_list.h
Added the breve (double whole note) and dotted breve note types to musical_notes.h. I included this because the default tempo is quite high, so I thought a note with higher
duration was needed

* Fixed indentation for new notes in musical_notes.h

Changed tabs to spaces in indentation
2019-03-11 13:53:22 -07:00
Wilba6582
92c19dae8c Fixed tap/down/up handling in dynamic keymap macros 2019-03-11 12:41:50 +11:00
Marco Monaco
73d8593352 increase size of note counter variable to avoid overflow 2019-03-05 15:03:24 -08:00
James Churchill
c7c4937eef Clean up debounce a bit (#5255) 2019-03-04 07:44:46 -08:00
avatak
8dd1dab7cb Added two songs to song_list.h (FF Prelude and To Boldly Go) (#5252)
Adds FF_Prelude (from most Final Fantasy games) and TO_BOLDLY_GO (a melody from the main themes of Star Trek TNG and the original series)
2019-02-28 12:35:42 -08:00