* initial commit
* preliminary support for mb17 using the qmk default keymap
* add the VIA keymap
* add qmk configurator support
* code cleanups before submission
* Update keyboards/mountainblocks/mb17/rules.mk
* Update keyboards/mountainblocks/mb17/info.json
* remove file
* Add initial KeebsPCB support
* Update readme
* Update readme
* Correct readme typo
* Update keyboards/acheron/keebspcb/config.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply @noroadsleft suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/acheron/keebspcb/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/acheron/keebspcb/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add new layout for 65% with blocker and add matching keymap
the rev2 pcb gets used in the kbd67 which has a blocker between the left arrow key and the right ctrl key. this layout is missing so far even though it's probably the most used one for this board.
* add split backspace layout with blocker
* change keycode for backslash
* update rules.mk and add missing layouts in info.json
* Update keyboards/kbdfans/kbd67/rev2/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add Kudox Game rev2.
* Add the keymap of Kudox Game a layer for regulating RGB.
* Modified rgblight_init when RGBLIGHT_ENABLE=no.
* Remove invalid codes.
* Modified *init* function right intention of framework.
* Set backlight and RGB pins for AVR onekeys
* Set pin for ADC as well
* Define ADC_PIN for F4 blackpills
* Use A0 for F4 ADCs
* Set ADC pins for F0 and F1
* [Keymap] Minidox Bepo layout
Todo :
Lower
Adjust
Update Lower E and Lower S on schema
* Added config.h
* Code review, update config.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: dolie <olivier.ghafari@pm.me>
Co-authored-by: Ryan <fauxpark@gmail.com>
* creation
new numpad layout for 23 keys
creation of new keymap
* Update cospad.h
* Update info.json
* Update keymap.c
* Update keymap.c
Added a macro for the "00" key.
* added two new keymap. one for each new layout.
The new keymaps are based on the default keymap but focus on
* Update keyboards/cospad/cospad.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/cospad.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad2/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad2/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keymap.c
layout name fix.
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Delete keymap.c
* Rename keyboards/cospad/keymaps/johannbl/numpad2/keymap.c to keyboards/cospad/keymaps/johannbl/split_plus_and_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/numpad3/keymap.c to keyboards/cospad/keymaps/johannbl/split_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/split_plus_and_zero/keymap.c to keyboards/cospad/keymaps/split_plus_and_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/split_zero/keymap.c to keyboards/cospad/keymaps/split_zero/keymap.c
* Update keyboards/cospad/keymaps/split_plus_and_zero/keymap.c
Co-Authored-By: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Lodestone: add ANSI and ISO layout data and keymaps
* rename layout macros
LAYOUT_ansi -> LAYOUT_65_ansi_blocker_split_bs
LAYOUT_iso -> LAYOUT_65_iso_blocker_split_bs
* use four-space indent on the new keymaps
* add 65_ansi_blocker and 65_iso_blocker layouts
* VIA Support: GH60 Rev C and GH60 Satan
* Corrected GH60 VIA default keymap
* Corrected GH60 VIA default keymap pt 2
* Copied default keymap over via default keymap
* Satan GH60 default corrected for VIA
* Satan GH60 default corrected for VIA pt 2
* Satan GH60 LTO enable for size
* Transparent 4th dynamic layer for GH60 Via support
* Update keyboards/gh60/revc/info.json
* Update keyboards/gh60/satan/info.json
* Update keyboards/gh60/satan/info.json
* Removed deprecated JSON keys gh60/revc/info.json
* Removed inline comment next to VID for GH60 Satan
* add via support for pdxkbc macropad
* add VIA support for the pdxkbc
* clean out some commented code
* remove unused files
* comment the vendor ID
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Create rules.mk
Added rules.mk in keymaps/via
* Update rules.mk
Added new line at the end of the file
* Create via\keymap.c
Added keymap.c inside the via directory
* Update config.h in projectkb/alice
Defined VIA eeprom layout size to 2 bits to allow for 4 layout options
* Add Lodestone PCB
Working Firmware for Lodestone PCB tested on physical PCB prototypes.
* Update keyboards/flx/lodestone/lodestone.c
* Update keyboards/flx/lodestone/keymaps/default/config.h
* Update keyboards/flx/lodestone/rules.mk
* Update keyboards/flx/lodestone/readme.md
* Delete config.h
* Update keyboards/flx/lodestone/info.json
Suggested by noroadsleft
* Update keyboards/flx/lodestone/info.json
* Update keyboards/flx/lodestone/info.json
Changed maintainer name as suggested.
* Update keyboards/flx/lodestone/keymaps/default/readme.md
* Update keyboards/flx/lodestone/info.json
* Update keyboards/flx/lodestone/rules.mk
Changed Link_Time_Optimization to LTO didn't know this was a thing :)
* Update keyboards/flx/lodestone/keymaps/default/keymap.c
Removed 2 unessisary layers from the default map.
* Update keyboards/flx/lodestone/readme.md
* Update keyboards/flx/lodestone/info.json
* Changed from LAYOUT to LAYOUT_all
AS suggested by noroadsleft, changed 4 files to match, and re-testeed on my hardware to confirm working.
* Update keyboards/flx/lodestone/config.h
Cleaned up Manu, Product and Descriptor as suggested.
* Update keyboards/flx/lodestone/readme.md
* Update default keymap for Choco60
* Update keyboards/choco60/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Assign unique VID to LazyDesigners' boards
* Add VIA support for LazyDesigners Dimple
* Apply @fauxpark's suggestions
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* add via keymap for doro67
* have more sensible VID and PID
* apply the same VIA changes to the regular PCB
* Update keyboards/doro67/rgb/keymaps/via/keymap.c
* Update keyboards/doro67/regular/config.h
* fix some formatting
* add via support for multi doro67
* added olkb_style layout for XD75
* removed unnecessary config.h
* cleaned up empty functions
* refactored fuction type for clarity
* renamed the layout
* Candybar: split lefty and righty into subprojects.
* Update readme.md
* Update readme.md
* Candybar: Moved STM32 library files into project root folder.
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/righty.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Candybar: remove Boards directory so project uses one from drivers
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
* Update readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add new keymap with split right shift and split backspace for bananasplit PCB
* Remove unecessary config.h
* Remove unecessary line breaks
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Christopher Janzen <hello@christopherjanzen.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* chore: delete a file that does not make sense anymore
* feat: first redox for danielo
* chore: basic compatibility between redox and my space
* refactor: removed some old stuff
* feat: added go coding symbols
* feat: name control_k and alt_j
* chore: reduce combo term
* feat: improved first layer of redox
* feat: add configurations to the redox
* feat: make alt tab more portable
* feat: small improvements to redox layout
* feat: added leader
* refactor: move leader defs to my userspace config
* chore: movement modified
* feat: more predefined keys and a a new combo
* feat: redox alt tab functionality
* refactor: move alt_tab processing to a separate file
* refactor: early return
* refactor: move process record to a separate file
* format leader function
* chore: backspace on digits layer
* feat: add extra combo
* feat: added more combos
* implement guard proposed by @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: include @drashna placeholder suggestion
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Since #7773 caused a build error for `mxss:default`, I made similar changes to 'keyboards/mxss/rgblight.h' as #7773 did to 'quantum/rgblight.h'.
**This commit does not change the build result.**
Testing script
```shell
# build on versions earlier than PR #7773
git checkout 0.8.24
echo master > /tmp/master_md5.txt
make mxss:default:clean
make mxss:default
md5 mxss_default.hex >> /tmp/master_md5.txt
# build on this commit
git checkout fix-keyboards-mxss-rgblight.h
echo fix-keyboards-mxss-rgblight.h > /tmp/branch_md5.txt
make mxss:default:clean
make mxss:default
md5 mxss_default.hex >> /tmp/branch_md5.txt
diff -u /tmp/master_md5.txt /tmp/branch_md5.txt
```
Test result:
```
--- /tmp/master_md5.txt 2020-03-12 05:51:39.000000000 +0900
+++ /tmp/branch_md5.txt 2020-03-12 05:51:49.000000000 +0900
@@ -1,2 +1,2 @@
-master
+fix-keyboards-mxss-rgblight.h
MD5 (mxss_default.hex) = 3034b2504d0c7fc6bd8bf1dffb6b8486
```
* Initial commit of oddball keyboard
* Update oddball project url
* Update pointer functions to only run on master side
* Add unique product version
* Capitalise product name
* Convert oddball keymap layer flags to enum
* Remove commented keyboard boilerplate code
* Remove unused keymap config
* Fix incorrect layout in info.json
* Add markdown link text in readme
* VIA_ENABLE Tokyo60 PCB
* Update config.h
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added Palette1202
* removed currently unused cords
* Update keyboards/palette1202/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
removed unnecessary horizontal line from readme.md
* Update readme.md
Fixed style, make command example
* Removed spaces
* removed unused config.h
* fixed defines
* fixed send string on rotate encoder
* fixed layer numbers for OLED Display
* fixed to use existing function to set default layer
https://github.com/qmk/qmk_firmware/pull/7736#discussion_r366699616
* flipped rotary encoder directions
* Added layer for Clip studio on iOS
* Update keyboards/palette1202/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/palette1202/lib/oled_helper.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* is_master, has_usb() move to rev2.[hc]
* Do recent helix/rev2 changes to helix/pico as well.
helix/pico/matrix.c: remove 'is_master'
helix/pico/pico.c: add 'is_master'
helix/pico/pico.h: add 'has_usb()' macro
helix/pico/split_util.c: remove 'setup_handedness()' 'has_usb()', add 'is_helix_master()' etc
* add HELIX=scan option into {rev2/pico}/local_features.mk
Made DEBUG_MATRIX_SCAN_RATE easy to use.
* Changed rules.mk to link "helix/local_drivers/ssd1306.c" only when OLED_ENABLE = yes.
* Added option to use split_common for helix/rev2, helix/pico keyboard.
how to build:
### build helix/pico (HelixPico) with helix current codes
$ make helix/pico:KEY_MAP
$ make helix/pico/back:KEY_MAP
### build helix/rev2 (Helix or Helix beta) with helix current codes
$ make helix:KEY_MAP
$ make helix/rev2/back:KEY_MAP
$ make helix/rev2/under:KEY_MAP
$ make helix/rev2/oled:KEY_MAP
$ make helix/rev2/oled/back:KEY_MAP
$ make helix/rev2/oled/under:KEY_MAP
### build helix/pico (HelixPico) with split_common codes
$ make helix/pico/sc:KEY_MAP
$ make helix/pico/sc/back:KEY_MAP
$ make helix/pico/sc/under:KEY_MAP
### build helix/rev2 (Helix) with split_common codes
$ make helix/rev2/sc:KEY_MAP
$ make helix/rev2/sc/back:KEY_MAP
$ make helix/rev2/sc/under:KEY_MAP
$ make helix/rev2/sc/oled:KEY_MAP
$ make helix/rev2/sc/oledback:KEY_MAP
$ make helix/rev2/sc/oledunder:KEY_MAP
* add matrix_slave_scan_user() to helix/rev2/rev2.c, helix/pico/pico.h
* Changed 'helix:xulkal' to always use split_common and removed ad hoc code.
Added the following line to 'helix/rev2/keymaps/xulkal/rules.mk':
SPLIT_KEYBOARD = yes
Removed the following ad hoc code from 'users/xulkal/custom_oled.c':
#if KEYBOARD_helix_rev2
extern uint8_t is_master;
bool is_keyboard_master(void) { return is_master; }
#endif
* add '#define DIODE_DIRECTION COL2ROW' into helix/{rev2|pico}/config.h
This commit does not change the build result.
* update helix readme
* keyboards/helix/readme.md
* keyboards/helix/pico/keymaps/default/readme.md
* keyboards/helix/rev2/keymaps/default/readme.md
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* adding Handwired Skeeb Keyboard
* Apply suggestions from fauxpark
* Apply more suggestions from fauxpark and small change to layout
* Apply more suggestions from noroadsleft and last tap dance
* 15/16 game with lights for the super 16
* Updated readme with style
* adding comments and initial style to keymap
trying to make the code look prettier, need to test by redownloading
* Final style revisions before pull request
* formatting changes, removed config.h
* modified rules.mk, works with changes in PR8314
* formatting
no number of spaces is enough for a newline, whoops
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Sam Reinehr <swreinehr@mines.edu>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add VIA support for neuron
* update neuron vendor and product id
* update neuron product id
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added more led helpers
* Working keymap
* Added new mouse button an made lower layer toggleable
* Small improvement to process_record_user
* Removed extra layer buttons
* Added Numpad to apply layer
* Moved buttons and added toggle for raise button
* Added Menu,PrintScreen and Windowslock buttons, and left handmouse
* Fixed Scroll Buttons
* Turned TAPPING TOGGLE to 2
* Switched Del and Ctrl on left hand
* Added Home Button to Mouse layer
* Fixed led initialization to avoid red led on boot
* Updated formatting to follow guidelines
* Used enums instead of defines and used layer_state_t type
* Added license
* Moved TAPPING settings to keymap config
* Fixed small formatting issue in keymap.c
* Use GPIO Control instead of lowlevel ports
* Add Colemak layout
* Add status bar for mods & locks with a custom font
* Swap DEL and TAB
* Fix media keys and add QMK Configurator layout
* Add dead grave accent on <leader>e
* via configurator can't do AG_TOGG with any key - meh
* same issue - via can't do AG_TOGG
* oops - missed AG_TOGG on the NK65
* add media and mousekeys
* Update keyboards/nk65/keymaps/madhatter/keymap.c
* refactor yd60mq.h
- four-space indent
- use K<row><col> base32hex notation
- rename LAYOUT to LAYOUT_all (with alias for backwards compatibility)
* refactor yd60mq.c to use led_update_kb()
* align rules.mk to AVR template
* refactor default keymap
Also correct positions for KC_NUHS and KC_NUBS.
* update readme
* add Configurator layout support
* initialize the Caps Lock LED pin properly
* Keymap Update
Some key codes have been updated.
naked64:salicylic
7skb:default
* Keymap Update
Some key codes have been updated.
KC_GRAVE to KC_GRV
7skb:default
* Initial commit of majbritt
* Add QMK and VIA support to majbritt
* Change vendor and product id
* Change name
* Change make path
* Move Majbritt into sidderskb directory
* Update keyboards/sidderskb/majbritt/majbritt.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/sidderskb/majbritt/keymaps/default/config.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
* remove unused file
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change include guards to pragma once
* Clean up default keymaps
* Remove some magic numbers and use GPIO macros
* Clean up keyboard.[ch]
* Tidy up info.json and readme
* Align config.h with template
* Split up revision code into subfolders
* rev C-H has no audio, apparently
* Change revc_h to revc and document differences
* Turn off Audio on revb for now, for Travis' sake
* Split info.json into revision folders
* Clean up default keymaps some more
* to ease the maintenance for some boards ibnuda has.
* followed ridingqwerty's suggestion on 8821.
* folloing drashna's suggestion on qmk's 8221.
* following drashn's suggestion on qmk's 8211
* Keyboard: revamp frosty-flake leds
This commit transitions bpiphany/frosty_flake to led_update_{kb,user}
and rewrites the AVR bit twiddling logic to use the standard QMK GPIO
API.
* Keyboard: rewrite frosty_flake's matrix reader to be a lite custom matrix
This commit replaces frosty_flake's custom matrix and debounce logic
with a "lite" custom matrix. In addition to being somewhat clearer, this
allows a consumer of the flake board to choose their own debouncing
algorithm. The one closest to the implementation originally in use is
sym_g, but this opens us up to supporting eager_pk and eager_pr.
The original matrix code was 18 columns for 8 rows, but using a single
row read and unpacking the bits into individual columns. To simplify,
I've changed the key layout to be 8C 18R instead of 18C 8R: this lets us
use a single read directly into the matrix _and_ drop down to a uint8_t
instead of a uint32_t for matrix_row_t.
Since we're no longer implementing our own debouncing and row unpacking,
we save ~400 bytes on the final firmware image.
Fully tested against a CM Storm QFR hosting the flake -- this commit
message was written using the new matrix code.
Firmware Sizes (assuming stock configuration as of 42d6270f2)
Matrix+Debounce Size (bytes)
--------------- ------------
original 17740
new + sym_g 17284
new + eager_pr 18106
new + eager_pk 18204
I expect that there are some scanning speed benefits as well.
* Keyboard: update frosty_flake's UNUSED_PINS
* Keyboard: Remove meaningless weak redefinitions from frosty
These are not necessary (and all of them already live somewhere in
Quantum).
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* Add via support to Prime_M and clean things up
* Update rules.mk
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/config.h
Including the `xB` suffix prevents qmk_compiler (and thus QMK Configurator) from compiling firmware for the Wete.
Rolling this change back until we work out a long-term solution for the suffixes.
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* [Keyboard] Add Wete
* Fix width and height in Wete info.json
* Use default board files, core backlight, and disable RTC
* Disable I2C, SPI. Minor corrections
* Keymap typo update
* Add LAYOUT_all to info.json
* Remove extra spaces in README, delete matrix_*_kb functions
* Fix layout errors in wete.h, and some minor corrections
* Actually fix LAYOUT_all in info.json
* move lighting code from VIA into the keyboard's .c file so that every keymap can access it
* after some serious conversations with default and wkl, they agreed to let me modify their keymaps. They weren't too happy
* add a VIA keymap for kbd75
* rev2 is a completely different pcb allowing a NEW layout, setting this to have a different product id so users don't get confused when they're able to enable numpad layout on rev1 VIA
* Update keyboards/kbdfans/kbd75/rev1/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/kbdfans/kbd75/rev2/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Added custom keymap
* Update keyboards/preonic/keymaps/elisiano/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Address PR comments and added CTL_T(KC_ESC) on other layouts as well
Co-authored-by: Ryan <fauxpark@gmail.com>
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* Restructure /primekb directory to merge /prime_l and /prime_l_v2
* made changes requested by QMK reviewers
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* added via keymap for kbd8x mkii
* adding via to kbd8x mk2
* modified via kbd8x mk2 keymap
* enable LTO kbd8x mk2 via keymap
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* removed backticks kbd8x mk2 via keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* coding style cleanup, enable/disable misconfigured/broken features
* add SCLN missing, compile with backlight PWM warning
* edit json
* new info.json from KLE
* new info.json from KLE using QMK converter
* changes notes
* notes in pull request
* missing line in comments
* line wrap
* Update keyboards/kc60se/config.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* comment back in rules.mk
* add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested
* keymaps and info
* Delete keymap.c
not ready, I need to get a few iso characters corrected
* Delete keymap.c
not ready, need to get a few iso character define correctly
* Update info.json
Bspc to Backspace
* no unicode
* gui_on and gui_off in readme
* Update keyboards/kc60se/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove is_command
* Update keyboards/kc60se/config.h
remove comment
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/config.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove \\ in keymaps
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb()
* Update config.h
I had commented FORCE_NKRO out.. WHy did it com back?
Co-authored-by: Check your git settings! <chris@chris-laptop>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [keymap] ninjonas keymap updates
* [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores
* [keymap(lily58)] added numpad layer
* [keymap(crkbd)] added numpad layer activated through tapdance
* [fix(8170)] fixing code review changes requested by noroadsleft
* [fix(8170)] updating comments and .md files to use 'Cmd' instead of and ⌘
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* VIA support for Think6.5
* VIA support for Think6.5 Hotswap
* VIA works better with separate layout options
* Remove the colours used to help develop it in KLE
* Pay better attention to the JSON linter
* Update Think6.5 PRODUCT and remove VIA JSON defs
* VIA Support for the Idobo (ID75)
* Implemented the requested PR changes
* Readme was pointing to the wrong board
* Fixed Product ID
* Fixed Manufacturer name
* Better Vendor ID
Using the two 8-bit ASCII values from the keyboard name.
* Removed Bootmagic Lite as enabled anyway by VIA
* initial commit of VIA Support
* update PRODUCT (and MANUFACTURER) per VIA docs
Reference: https://caniusevia.com/docs/configuring_qmk#change-product
Updated MANUFACTURER so it matches what the PRODUCT says.
* enable Link Time Optimization per mechmerlin
* revert change to USB Product Name
* add two empty layers to via keymap
VIA keymaps need four layers in flash.
* correct the layer indexes
Start from 0, not 1.
* Drop in old files
* Make a blank template keyboard to refresh ancient files to latest config
* Update keymaps files to new format
* Remove chunks of config asked for removal in previous pullreqs
* Remove split pin option from config
* Update rules.mk to latest version
* Remove unused functions from polaris.c
* Add via keymap
* Build basic tsangan keymap; add QMK configurator info
* Remove temporary template
* Update keyboards/ai03/polaris/config.h
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update rules.mk
* Fixes as per pullreq
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/polaris.h
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/info.json
* Update keyboards/ai03/polaris/keymaps/testing/readme.md
* refactor keymaps
Create one keymap for each layout macro.
* remove config.h for default keymap
There's nothing in it.
* update readme
- use the new list format
- use a smaller version of the keyboard photo (does the readme really need a 14MP image on it?)
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* houndstooth
* Amended with collaborator suggestions
* LAYOUT fixup, left crud in keymap
* Fix missing comma in keymap.c
* Correct RGBLIGHT_ENABLE to no
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* YMDK NP21: matrix and keymap refactor
- refactored layout macros
- LAYOUT_ortho_6x4 orients the keyboard with the USB port to the back instead of to the right
- LAYOUT uses the previous sideways orientation (included for backwards compatibility)
- removed redundant includes from ymdk_np21.h
- added a readme for the default keymap
* add Configurator layout support
* fix layout macro and update keymaps
K2D switch position is actually physically on the top row, as the right half of a split Backspace.
* add QMK Configurator layout support
* Adding my keymap
Adding a personalized keymap to the Raine keyboard. This diffirentiates itself by being useble with nordic characters even when the bottom row has blockers. Also added ASCII art to help visualize what you are doing when programming the board.
* Update Readme.md
Ned image of the board
* Update Readme.md
Forgot a space in Readme
* Update Readme.md
And another missed space
* Update keymap.c
Renoved Definetion that is not used
* Update Readme.md
* Remove files for renaming
* Adding files after renaming
Was unable to get Girthub to push renamed files/folders. Therefore removeing and adding them again.
* add the via keymap
* get an appropriate unused VID
* fix formatting up a bit
* Update keyboards/kbdfans/kbd67/mkiirgb/v1/config.h
* Update keyboards/kbdfans/kbd67/mkiirgb/v2/config.h
* new alternative controller.
* following suggestions at qmk's 8059.
* forgot to replace some underscores and keycodes.
* following drashna's suggestions at qmk's 8059.
* following zvecr's suggestion in qmk's 8059.
* following noroadsleft's suggestion at qmk's 8059.
* [keymap(kyria)] moved OLED & encoder implementation to separate classes
* [feat] created logic to cycle through hue wheel when starting keyboard
* [feat] created logic to cycle through hue wheel and return to user's default color
* [refactor] updating OLED layout for crkbd & lily58
* [refactor] updating OLED layout for crkbd & lily58
* [fix(8070)] updating encoder.c logic based off drashna's code review
* [refactor(8070)] added key to send + Shift + M
* disable Console to save firmware space
* rules.mk templating
Add comments regarding the rules, to more closely match the ps2avrgb template.
* update info.json
This board has a quite interesting take on the standard TKL; why not show it off?
* update the vendor id for 1upkeyboards 1up60hte
* add the via keymap and rules file
* fix typo
* move the LTO to the keyboard's rules.mk
* Update keyboards/1upkeyboards/1up60hte/config.h
* Created the yoryer layout for the Quefrency 65%
* added rgb control layer
* Required changes to resolve PR #7947 issues
* - Updated the layer list as an enum
- Removed .gitignore file from keymap folder
* Removed the .gitignore from keymap folder
* Begin work on spfs, migrating ancient config
* QMK breaks if there's a dash in the board name
* Update info.json
* Make indicator LEDs work
* Build a readme
* Change title to match official GB thread name
* Add an ANSI WKL layout for simplicity
* Adjustments as per pullreq recommendations
* Remove unused functions from other keymap
* Add backlight custom driver to all boards not declaring it but overriding backlight
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove old tmk references from show_options.mk
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add initial configuration and keymaps for Yatara Drink Me.
* Apply suggestions from code review
* Apply suggestions from code review
* Add transparent layers in VIA layout so there are four layers in total. Amend closing bracket indentation in keymap.c files.
* Add the Whitefox vanilla layout
Initial commit for whitefox vanilla keymap
Fix the mapped layout to match vanilla
Cleanup vanilla default
Rework the info file
Remove vanilla keymap as we don't really need this
* adds to theDora readme for more explicit directions on flashing,
with links and how to enter bootloader mode.
* fmt
* Corrects language of steps for loading firmware
* Update keyboards/ckeys/thedora/readme.md
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files
* Correct some 'rules.mk' in boards buried under vendor folders
* PR8027 patch
Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add German programming layout for Lets Split
* Update copyright in config.h
* Add Hash-Symbol to keymap
* Change to fit suggestions in PR
* Changes as requested, but broken.
* Fix layer switching issue
* Add Quefrency Rev. 2
* Add encoder support
* Add RGB LED mapping info
* Add diode direction
* Revert removal of default folder for CI purposes
* Remove unneeded lines
* Rename ISO layout macros
* add VIA support for 1up60hse
* choose a vendor and product id that is not taken
* add mousekey_enable set to no as per Wilba's recommendation
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* add a fourth layer
* might as well remove the config file as we are not including the one thing that was in it
* Fix Pulse4k info.json LAYOUT name
* Add missing functions to fix configurator
Add empty encoder functions to the keyboard code, as the configurator doesn't see the keymap defined functions at first.
To be able to override these functions, they are marked as 'weak'.
* Rework encoder functions another time
Default implementation is now provided as part of the keyboard, but they can still be overriden within the keymap (template is commented out by default)
* Reworked for VIA support
Reworked for VIA support and tidying up of older code.
* Fixed naming issues, and prepared for VIA compat
Via compat added
* Improve layouts, tidy code, via keymap
Added support for VIA and cleaned up some code and layouts.
* Implimented suggestions by MechMerlin
* Fix capitalisation
Mistake raised by Drashna now fixed.
* Tidy comments as requested by noroadsleft
* Tidy comments as requested by fauxpark
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* feat: merge ergodox ez into latest maste
* chore: remove my build with docker file
* chore: remove my changes to process_leader
* feat: more modular user danielo515
* Apply suggestions from @ridingqwerty
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* chore: more suggestions implemented
* chore: add my basic details
* Apply suggestions from @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* fix: more @drashna fixes
* feat: @fauxpark optimization
* fix: some more @drashna improvements
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: small improvement on layout
* fix: some more @drashna improvements
* chore: remove some F dance
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>