* Generate a new project for the KBD4x
* Specify the possible layouts for the KBD4x - MIT and grid
* Fill out the readme for the KBD4x
* Configure the default keymap and wiring configuration as specified on http://qmkeyboard.cn/
* Add info.json for QMK Configurator
* Enable backlight support for the KBD4x
* Standardise on LAYOUT_planck_mit/LAYOUT_ortho_4x12 layout names
* Add whitespace so the Readme will render correctly
* Disable mouse keys support for the KBD4x to make the firmware small enough
* DZ60: Deleted K214 from LAYOUT_all
* DZ60: Delete matrix LAYOUT_2_shifts; replace with LAYOUT_all
After the deletion of K214 from LAYOUT_all, LAYOUT_all and LAYOUT_2_shifts are identical.
Deprecated LAYOUT_2_shifts in favor of LAYOUT_all.
* DZ60: refactor 256k_HHKB and itsaferbie keymaps to use LAYOUT_60_hhkb macro
Both keymaps previously used the LAYOUT_hhkb macro. After comparing the macros, the only difference between them was that LAYOUT_hhkb included the place of the ISO Backslash key. Neither keymap used this key, so both were refactored to use LAYOUT_60_hhkb instead.
LAYOUT_hhkb is now essentially unused by any keymaps in the repo. (More on that in a moment.)
* DZ60: bugfix for dbroqua keymap
This keymap had two layers that used the LAYOUT_true_hhkb macro and a third that used LAYOUT_hhkb. These macros have the same number of keys, but represent different physical layouts. As the "main" layers used LAYOUT_true_hhkb, switched the third layer to LAYOUT_true_hhkb as well.
The LAYOUT_hhkb macro is now unused by any DZ60 keymaps in the repo, and can be safely deleted.
* DZ60: bugfix for 60_ansi_arrow_fkeys, 60_plus_arrows, and stephengrier keymaps
All three keymaps had one layer in LAYOUT_all and one in LAYOUT_directional. Only difference between these macros is LAYOUT_all excludes the ISO Backslash position. As none of the keymaps used this position, all layers were switched to use LAYOUT_directional.
* DZ60: added layout mock-ups to dz60.h
Documenting the physical layouts that go with each matrix.
* DZ60: replace TMK SHIFT_ESC with QMK Grave Escape
Replaced all instances of keycodes that called TMK's ACTION_FUNCTION(SHIFT_ESC) with QMK's KC_GESC, and added config.h files so KC_GESC behaves as the deprecated TMK function did, except for the default keymap, which I thought should have the QMK standard behavior.
* DZ60: delete SHIFT_ESC code blocks
Deleted ACTION_FUNCTION(SHIFT_ESC) code blocks from keymaps that didn't use the functionality it provided.
* DZ60: deleted unused MODS_CTRL_MASk definitions
Was used in the now-deleted SHIFT_ESC code blocks. Interestingly named MODS_CTRL_MASK when it was actually checking the Shift keys. *shrug*
* DZ60: refactor jkbone keymap to use process_record_user
Replaced TMK action_function keycodes with QMK process_record_user equivalents.
* DZ60: delete unused layout macros
The macros LAYOUT_hhkb, LAYOUT_directional_625_space, and LAYOUT_60_ansi_split_bs_rshift_5x1u were unused by any keymaps in the repo, and have thus been deleted.
* DZ60: refactor iso_6u_space and iso_7u_space keymaps
Both keymaps refactored to use the LAYOUT_60_iso macro.
* DZ60: refactor dz60.h
Updated the notation of the switch arguments. Format is now:
`k<row><column>`
where `<row>` is `[0-4]` and `<column>` is `[0-9a-e]`.
* DZ60: refactor LAYOUT_60_iso_5x1u matrix
Updated matrix so `KC_ENT` belongs on the home row, which is consistent with LAYOUT_60_iso for the DZ60 as well as the ISO community layouts.
* DZ60: fix white space in dz60.h
I hate when indentation is inconsistent within a file.
* Enabled unicode support and send_unicode function
* Unicode cleanup
* More unicode tweaking
* Update EEPROM stuff
* Account for keyboard macros
* Switch Equal to Plus on Ergodox
* more tweaks
* Minor Unicode tweaks
* Correct matrix printing for keylogger
* Fix unicode functions
* Fix unicode mode set since it actually uses EEPROM
* Re-add DISABLE_LEADER
* Ergodox is easier to hit the tapping term, fix that
* Fix stupid type on unicode mode check
* Preliminary CRKBD/HeliDox support
* Fixes to Helidox
* Cleanup userspace from old merge stuff
* Remove CCCV sounds
* Make Mode NOEEPROM Again
* Add send_string_unicode function
Co-authored-by: kdb424 <kdb424@gmail.com>
Co-authored-by: Konstantin <vomindoraan@gmail.com>
* Clean up code based on feedback
* Fix includes
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Use proper function levels
* Add matrix init functions
* Convert KEYMAP to LAYOUT
Or @mechmerlin is going to hunt me down and harm me... probably :)
* Fix conflict issues
* Add personal KC60 keymap
* Update personal KC60 keymap
* Keymap update 2018-05-30 01:53 UTC-7
* Added macro: T_PEEKR
* Added macro for MacOS Select All; modified MacOS function layer
* Added git branch-name macro
* Added GitHub signature macro
* Added readme files
* Added Quake 2 and System layers
* Refactored keymap readme
* Refactored to add userspace files; added Colemak layer
* Minor code cleanup; updated readme files
* Reverted use of userspace
Decided not to make use of the Userspace feature at this time. Reverted its addition, and updated the readme files where needed (they were linking to userspace files).
* Updated per review comments by @drashna
* Refactor buggy macros
I'm still not sure these work properly
* Fix Windows shortcuts
* Fix Mac shortcuts, possibly
Untested; still may be broken.
* Remove PREVENT_STUCK_MODIFIERS from config.h
Deprecated by #3107
* Custom keymap for the ErgoDone
The keymap supports QWERTY and COLEMAK MOD-DH with LED indication.
* Enable Space Cadet Shift
* Fix after-boot layer indicator LED
* Implement keyboard suspend, move layer LED handling to function, unify
identation
* Add readme.md with layout
* Optimize LED handling, add include guard
Read the default layer via the proper EEPROM function, so the calling of
bootmagic() is no longer necessary.
Fix bug when the CapsLock LED wasn't working anymore after a layer
switch.
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
* implemented some leader key stuff
* removed merge garbage...
* changes requested by @drashna, leader key switch from macros
* Add basic support for the YD68 / YD68v2.
Keymap and WS2812 underlighting work. Capslock LED should work, though I don't have one populated to test. Backlight LEDs are not set up, as they're not on a hardware PWM pin, could be set up as software.
* Fix Imgur link
* Fix default keymap to match the stock firmware
* Fix the Hardware Supported line and add a short description
Messed up in my previous PR (#4017) by providing the wrong matrix name.
Fixing by changing the matrix name instead, because there's only one at this point. Thought it made more sense this way.
* Helix: make rgblight modes selectable.
No change in build result.
* edit the comment of helix/rev2/keymaps/default/keymap.c
* Helix led_test keymap: reduced the size.
* Disable Leader to reduce firmware size for Travis
* Additionaly fixes to USB_USB\BLE Keyboard converter
* Disable One Shots to get USB to USB BLE converter to fit
* Update for SEND_STRING usage
Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.
* Updates for send string, syscalls, stdio, debug prints, auto shift
Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.
* CTRL and ALT keymap updates
CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no
* Code cleanup as per discussion with vomindoraan
Code cleanup as per discussion with vomindoraan
Specifically, an "L" got appended to the controller names for te "valid types",
but did not get appended to the blocks that include the specific drives.
So, this breaks anything that isn't "Yes".
* Update quantum matrix to support both AVR and Chibios ARM
- Addition of STM32 pin definitions
- Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR)
- Modified matrix.c to use the above functions
* minor ifdef fix
* Rename of functions and docs
- Added documentation.
- Renamed functions according to Jack's spec.
* Massdrop fix
* Update matrix.c
* Update quantum.h
* Update quantum.h
* Update quantum.h
* Update internals_gpio_control.md
* Add pragma once info to contributing guidelines
* Fix links in readme template to match doc site
* Revert changes to contributing doc as somebody already changed it
* model01: implement RGB matrix feature
LEDs can still be individually controlled if this is switched off.
* model01: use fast banked LED setting commands
* model01: update default keymap to use RGB matrix
* model01: update RGB matrix support to match common_features.mk
* rgb_matrix: include <string.h>
This was missing after commit 4d5705ea6c
which introduces a use of memset().
* model01: make g_rgb_leds weak
This allows users to override which LEDs are configured as
modifiers, or tweak the x/y coordinates, should they so choose.
