# project specific files # SRC = ssd1306.c ## chip/board settings # the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F0xx # linker script to use # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ MCU_LDSCRIPT = STM32F072xB # startup code to use # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ MCU_STARTUP = stm32f0xx # it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards BOARD = ST_STM32F072B_DISCOVERY # Cortex version # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 MCU = cortex-m0 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 ARMV = 6 # If you want to be able to jump to bootloader from firmware on STM32 MCUs, # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have # a custom board definition that you plan to reuse). # If you're not setting it here, leave it commented out. # It is chip dependent, the correct number can be looked up here (page 175): # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf # This also requires a patch to chibios: # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 # Build Options # comment out to disable the options. # # project specific files VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = no # Custom matrix file # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason RGBLIGHT_ENABLE = yes # RAW_ENABLE = yes # DYNAMIC_KEYMAP_ENABLE = yes DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave