/* Copyright 2011 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef CONFIG_H #define CONFIG_H #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x4242 #define DEVICE_VER 0x0104 #define MANUFACTURER t.m.k. #define PRODUCT HHKB mod #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod /* matrix size */ #ifdef HHKB_JP # define MATRIX_ROWS 16 #else # define MATRIX_ROWS 8 #endif #define MATRIX_COLS 8 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) /* period of tapping(ms) */ #define TAPPING_TERM 300 /* tap count needed for toggling a feature */ #define TAPPING_TOGGLE 5 /* Oneshot timeout(ms) */ #define ONESHOT_TIMEOUT 300 /* Boot Magic salt key: Space */ #define BOOTMAGIC_KEY_SALT KC_FN6 /* power control of key switch board */ #define HHKB_POWER_SAVING /* * Hardware Serial(UART) * Baud rate are calculated with round off(+0.5). */ #ifdef __AVR_ATmega32U4__ /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */ #define UCSR1D _SFR_MEM8(0xCB) #define RTSEN 0 #define CTSEN 1 #define SERIAL_UART_BAUD 115200 #define SERIAL_UART_DATA UDR1 #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5)) #define SERIAL_UART_RXD_VECT USART1_RX_vect #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) #define SERIAL_UART_INIT() do { \ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \ UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \ UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \ DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \ sei(); \ } while(0) #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0) #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0) #else #error "USART configuration is needed." #endif /* for debug */ #define SUART_OUT_PORT PORTD #define SUART_OUT_BIT 0 #define SUART_IN_PIN PIND #define SUART_IN_BIT 1 /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION #endif