/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Printer Host Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Printer Device</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Bidirectional Protocol</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF Printer Class Specification \n * PCL Language Specification</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * Printer host demonstration application. This gives a simple reference * application for implementing a USB Printer host, for USB printers using * the bidirectional data encapsulation protocol and PCL language. * * Upon connection of a compatible printer, the printer's device ID is sent * to the AVR's serial port, and a simple test page is printed using the PCL * printer language. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */