1
0
Fork 0
qmk_firmware/keyboards/omnikeyish/dynamic_macro.h
henrikosorensen 1c75385d76 [Keyboard] Add new keyboard: Omnikeyish - A replacement PCB for the Northgate Omnikey family ()
* Add omnikeyish keyboard support.

* remove out of date comment

* PCB Rev 1.1 moved Row5's pin to E6, because the teensy++ hangs an onboard LED off D6.

* Move string.h include to .c file

* Add pcb kicad link.

* Add info.json

* Move macro programming to numlock's keyposition, the most useless key on the post model M layout. Force numlock enabled on host at init time, so you're not stuck without a numpad (hopefully)

* Make the macro blink function toggle LEDs from their previous state.

* Use incorrect but code style compliant opening curly bracing style.

* Make PCB rev 1.1 the default Omnikeyish config, as the author has the only rev 1.0 boards that'll ever be.

* Fix silly spelling error in 3 defines

* First set of review changes.

* Layout macro and keymap defined using it.

* Layout macros for the northgate factory plates.

* minor rearrangements

* ALL the layouts.

* Forgot ultra-t in info.json
2019-06-22 08:36:05 -07:00

95 lines
3 KiB
C

/* Copyright 2016 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* Author: Wojciech Siewierski < wojciech dot siewierski at onet dot pl > */
#pragma once
#include "action.h"
#include "action_layer.h"
#ifndef DYNAMIC_MACRO_COUNT
#define DYNAMIC_MACRO_COUNT 2
#endif
#ifndef DYNAMIC_MACRO_SIZE
/* May be overridden with a custom value. Be aware that the effective
* macro length is half of this value: each keypress is recorded twice
* because of the down-event and up-event. This is not a bug, it's the
* intended behavior.
*
* Usually it should be fine to set the macro size to at least 256 but
* there have been reports of it being too much in some users' cases,
* so 128 is considered a safe default.
*/
#define DYNAMIC_MACRO_SIZE 64
#endif
#ifndef DYNAMIC_MACRO_EEPROM_STORAGE
#define DYNAMIC_MACRO_EEPROM_STORAGE
#endif
/* DYNAMIC_MACRO_RANGE must be set as the last element of user's
* "planck_keycodes" enum prior to including this header. This allows
* us to 'extend' it.
*/
enum dynamic_macro_keycodes {
DYN_MACRO_PROG = DYNAMIC_MACRO_RANGE,
/* Requirement: DYN_MACRO_KEYs are in sequence in the enum. */
DYN_MACRO_KEY1,
DYN_MACRO_KEY2,
DYN_MACRO_KEY3,
DYN_MACRO_KEY4,
DYN_MACRO_KEY5,
DYN_MACRO_KEY6,
DYN_MACRO_KEY7,
DYN_MACRO_KEY8,
DYN_MACRO_KEY9,
DYN_MACRO_KEY10,
DYN_MACRO_KEY11,
DYN_MACRO_KEY12
};
enum dynamic_macro_recording_state { STATE_NOT_RECORDING, STATE_RECORD_KEY_PRESSED, STATE_CURRENTLY_RECORDING };
typedef struct {
keyrecord_t events[DYNAMIC_MACRO_SIZE];
uint8_t length;
uint16_t checksum;
} dynamic_macro_t;
dynamic_macro_t dynamic_macros[DYNAMIC_MACRO_COUNT];
void dynamic_macro_init(void);
void dynamic_macro_led_blink(void);
void dynamic_macro_record_start(uint8_t macro_id);
void dynamic_macro_play(uint8_t macro_id);
void dynamic_macro_record_key(uint8_t macro_id, keyrecord_t* record);
void dynamic_macro_record_end(uint8_t macro_id);
bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t* record);
#define DYNAMIC_MACRO_CRC_LENGTH (sizeof(dynamic_macro_t) - sizeof(uint16_t))
#ifdef DYNAMIC_MACRO_EEPROM_STORAGE
#define DYNAMIC_MACRO_EEPROM_MAGIC (uint16_t)0xDEAD
uint16_t dynamic_macro_calc_crc(dynamic_macro_t* macro);
void dynamic_macro_load_eeprom_all(void);
void dynamic_macro_load_eeprom(uint8_t macro_id);
void dynamic_macro_save_eeprom(uint8_t macro_id);
bool dynamic_macro_header_correct(void);
#endif