1
0
Fork 0
qmk_firmware/users/drashna/process_records.c
Drashna Jaelre eb91c96288
[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)
* Add Kyria Keymap

* Enable all RGBLIGHT Animations for ARM and high capacity AVR

* Reduce GNUC version for __has_include

* Cleanup Ortho 4x12 Community layout

* Update Collide 39 keymap

* Cleanup Keymaps

* Enable full 30 LEDs for Ergodox

* Change EEPROM Load timing

* Use RGB Matrix on Planck Rev6

* Use correct keymap swap

* Enable everything for ARM

* Only enable rgb sleep on avr until crash is fixed

* Add additional Kyria keymap config

* Overhaul Kyria OLED display

* Improve kyria keymap based on usage

* Minor tweaks to rules

* Update OLED code to truncate properly

* Fix RGB Light layer indication

* Switch all of biton32 to get_highest_layer function

* Fix OLED Keylogger display

* Run qmk cformat over all of my user files

* Slight tweak to kyria based on usage

* Move around LALT_T config

* Add comments about base wrappers to keymaps

* Another cformat pass

* Temp fix for VUSB boards and NKRO

* Convert tabs to spaces in rules.mk files

* Only enable RGBLight if it's enabled

* Add Encoder Flip setting

* Update OLED font file
2019-11-20 12:37:24 -08:00

121 lines
5 KiB
C

#include "drashna.h"
uint16_t copy_paste_timer;
__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
__attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; }
// Defines actions tor my global custom keycodes. Defined in drashna.h file
// Then runs the _keymap's record handier if not processed here
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// If console is enabled, it will print the matrix position and status of each key pressed
#ifdef KEYLOGGER_ENABLE
# if defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_keebio_iris_rev2)
xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.row, record->event.key.col, record->event.pressed);
# else
xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
# endif
#endif // KEYLOGGER_ENABLE
switch (keycode) {
case KC_QWERTY ... KC_WORKMAN:
if (record->event.pressed) {
uint8_t mods = mod_config(get_mods() | get_oneshot_mods());
if (!mods) {
set_single_persistent_default_layer(keycode - KC_QWERTY);
} else if (mods & MOD_MASK_SHIFT) {
set_single_persistent_default_layer(keycode - KC_QWERTY + 4);
} else if (mods & MOD_MASK_CTRL) {
set_single_persistent_default_layer(keycode - KC_QWERTY + 8);
}
}
break;
case KC_MAKE: // Compiles the firmware, and adds the flash command based on keyboard bootloader
if (!record->event.pressed) {
uint8_t temp_mod = mod_config(get_mods());
uint8_t temp_osm = mod_config(get_oneshot_mods());
clear_mods();
clear_oneshot_mods();
send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), TAP_CODE_DELAY);
#ifndef MAKE_BOOTLOADER
if ((temp_mod | temp_osm) & MOD_MASK_SHIFT)
#endif
{
send_string_with_delay_P(PSTR(":flash"), TAP_CODE_DELAY);
}
if ((temp_mod | temp_osm) & MOD_MASK_CTRL) {
send_string_with_delay_P(PSTR(" -j8 --output-sync"), TAP_CODE_DELAY);
}
#ifdef RGB_MATRIX_SPLIT_RIGHT
send_string_with_delay_P(PSTR(" RGB_MATRIX_SPLIT_RIGHT=yes"), TAP_CODE_DELAY);
# ifndef OLED_DRIVER_ENABLE
send_string_with_delay_P(PSTR(" OLED_DRIVER_ENABLE=no"), TAP_CODE_DELAY);
# endif
#endif
send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY);
}
break;
case VRSN: // Prints firmware version
if (record->event.pressed) {
send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY);
}
break;
case KC_DIABLO_CLEAR: // reset all Diablo timers, disabling them
#ifdef TAP_DANCE_ENABLE
if (record->event.pressed) {
for (uint8_t index = 0; index < 4; index++) {
diablo_timer[index].key_interval = 0;
}
}
#endif // TAP_DANCE_ENABLE
break;
case KC_CCCV: // One key copy/paste
if (record->event.pressed) {
copy_paste_timer = timer_read();
} else {
if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { // Hold, copy
register_code(KC_LCTL);
tap_code(KC_C);
unregister_code(KC_LCTL);
} else { // Tap, paste
register_code(KC_LCTL);
tap_code(KC_V);
unregister_code(KC_LCTL);
}
}
break;
#ifdef UNICODE_ENABLE
case UC_FLIP: // (ノಠ痊ಠ)ノ彡┻━┻
if (record->event.pressed) {
send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B");
}
break;
case UC_TABL: // ┬─┬ノ( º _ ºノ)
if (record->event.pressed) {
send_unicode_hex_string("252C 2500 252C 30CE 0028 0020 00BA 0020 005F 0020 00BA 30CE 0029");
}
break;
case UC_SHRG: // ¯\_(ツ)_/¯
if (record->event.pressed) {
send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
}
break;
case UC_DISA: // ಠ_ಠ
if (record->event.pressed) {
send_unicode_hex_string("0CA0 005F 0CA0");
}
break;
#endif
}
return process_record_keymap(keycode, record) &&
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
process_record_user_rgb(keycode, record) &&
#endif // RGBLIGHT_ENABLE
process_record_secrets(keycode, record);
}