1
0
Fork 0
qmk_firmware/keyboards/jm60
Marco 349e0012ba Basic support for JM60 keyboard
This adds basic support for JM60 RGB PCB that was sold
by KBDfans https://kbdfans.myshopify.com/
https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html

No support for RGB Backlight yet.
2017-09-10 22:58:55 -04:00
..
boards/JM60_BOARD Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
keymaps Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
ld Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
Makefile Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
chconf.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
config.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
halconf.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
jm60.c Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
jm60.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
led.c Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
matrix.c Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
mcuconf.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
readme.md Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
rules.mk Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00

readme.md

JM60

A compact 60% keyboard with full RGB led support.

Keyboard Maintainer: QMK Community Hardware Supported: JM60 Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)

Make example for this keyboard (after setting up your build environment):

make jm60-default-bin

See build environment setup then the make instructions for more information.

Flashing Instructions

  1. from the qmk_firmware directory run:
$ make jm60-default-bin
  1. rename 'jm60_default.bin' to 'jm60_default.firmware'

  2. Press 'R' and reconnect the keyboard.

  3. Start the original Configuration Tool and flash 'jm60_default.bin'