1
0
Fork 0
qmk_firmware/quantum/rgblight.h
Drashna Jaelre 751719e6cb Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)
* And and fix _noeeprom functions to many of the RGB Underglow functions

* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times.  But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs

* Update RGB Sleep feature to use _noeeprom

Because that's exactly what it should be doing, actually!
2018-05-29 11:05:22 -04:00

164 lines
4.9 KiB
C

/* Copyright 2017 Yang Liu
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef RGBLIGHT_H
#define RGBLIGHT_H
#ifdef RGBLIGHT_ANIMATIONS
#define RGBLIGHT_MODES 34
#else
#define RGBLIGHT_MODES 1
#endif
#ifndef RGBLIGHT_EFFECT_BREATHE_CENTER
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1-2.7
#endif
#ifndef RGBLIGHT_EFFECT_BREATHE_MAX
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0-255
#endif
#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4
#endif
#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
#endif
#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0
#endif
#ifndef RGBLIGHT_EFFECT_KNIGHT_LED_NUM
#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM
#endif
#ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL
#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000
#endif
#ifndef RGBLIGHT_EFFECT_CHRISTMAS_STEP
#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2
#endif
#ifndef RGBLIGHT_HUE_STEP
#define RGBLIGHT_HUE_STEP 10
#endif
#ifndef RGBLIGHT_SAT_STEP
#define RGBLIGHT_SAT_STEP 17
#endif
#ifndef RGBLIGHT_VAL_STEP
#define RGBLIGHT_VAL_STEP 17
#endif
#define RGBLED_TIMER_TOP F_CPU/(256*64)
// #define RGBLED_TIMER_TOP 0xFF10
#include <stdint.h>
#include <stdbool.h>
#include "eeconfig.h"
#ifndef RGBLIGHT_CUSTOM_DRIVER
#include "ws2812.h"
#endif
#include "rgblight_types.h"
#include "rgblight_list.h"
extern LED_TYPE led[RGBLED_NUM];
extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM;
extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM;
extern const uint8_t RGBLED_SNAKE_INTERVALS[3] PROGMEM;
extern const uint8_t RGBLED_KNIGHT_INTERVALS[3] PROGMEM;
typedef union {
uint32_t raw;
struct {
bool enable :1;
uint8_t mode :6;
uint16_t hue :9;
uint8_t sat :8;
uint8_t val :8;
uint8_t speed :8;//EECONFIG needs to be increased to support this
};
} rgblight_config_t;
void rgblight_init(void);
void rgblight_increase(void);
void rgblight_decrease(void);
void rgblight_toggle(void);
void rgblight_enable(void);
void rgblight_disable(void);
void rgblight_step(void);
void rgblight_step_reverse(void);
uint32_t rgblight_get_mode(void);
void rgblight_mode(uint8_t mode);
void rgblight_set(void);
void rgblight_update_dword(uint32_t dword);
void rgblight_increase_hue(void);
void rgblight_decrease_hue(void);
void rgblight_increase_sat(void);
void rgblight_decrease_sat(void);
void rgblight_increase_val(void);
void rgblight_decrease_val(void);
void rgblight_increase_speed(void);
void rgblight_decrease_speed(void);
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
uint16_t rgblight_get_hue(void);
uint8_t rgblight_get_sat(void);
uint8_t rgblight_get_val(void);
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index);
void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index);
uint32_t eeconfig_read_rgblight(void);
void eeconfig_update_rgblight(uint32_t val);
void eeconfig_update_rgblight_default(void);
void eeconfig_debug_rgblight(void);
void rgb_matrix_increase(void);
void rgb_matrix_decrease(void);
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1);
void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1);
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
void rgblight_mode_noeeprom(uint8_t mode);
void rgblight_toggle_noeeprom(void);
void rgblight_enable_noeeprom(void);
void rgblight_disable_noeeprom(void);
void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom);
void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom);
#define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b);
void rgblight_task(void);
void rgblight_timer_init(void);
void rgblight_timer_enable(void);
void rgblight_timer_disable(void);
void rgblight_timer_toggle(void);
void rgblight_effect_breathing(uint8_t interval);
void rgblight_effect_rainbow_mood(uint8_t interval);
void rgblight_effect_rainbow_swirl(uint8_t interval);
void rgblight_effect_snake(uint8_t interval);
void rgblight_effect_knight(uint8_t interval);
void rgblight_effect_christmas(void);
#endif