1
0
Fork 0
qmk_firmware/keyboards/ergodone
Harshit Goel 23ce0b43b6 Further updated ergodone readme.md (#1714)
* updated read.md file

* added image to flash hex on ergodone

* corrected image link

* updated direct image link

* image with larger text
2017-09-14 13:05:29 -04:00
..
keymaps/default Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
Makefile Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
config.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
ergodone.c make ergodone's led work well 2017-08-26 23:32:25 -04:00
ergodone.h make ergodone's led work well 2017-08-26 23:32:25 -04:00
expander.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
expander.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
i2cmaster.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
matrix.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
readme.md Further updated ergodone readme.md (#1714) 2017-09-14 13:05:29 -04:00
rules.mk Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
twimaster.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00

readme.md

ErgoDone

ErgoDone

ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy.

  • Keyboard Maintainer: Yu He
  • Hardware Supported:
    • ErgoDone ver. 1.3 (tested)
  • Hardware Availability: KBDFans

Make example for this keyboard (after setting up your build environment):

make ergodone-default

See build environment setup then the make instructions for more information.

Flashing the keyboard

The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware.

  1. While plugging in the USB cable, hold the two right-most keys on the top row of the left half of the ErgoDone to enter FLASH mode and flash a hex file. Ergodone Flash Mode

  2. Use the hid_bootloader_cli utlity from TKG Toolkit:

     hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default