1
0
Fork 0
qmk_firmware/keyboards/singa
Drashna Jaelre 0072fdd799 Cleanup Default Keymaps ()
* Cleanup Default Keymaps to conform to QMK Firmware standards

* Minor fixes

* Revert some changes
2019-03-19 12:57:40 -07:00
..
keymaps Cleanup Default Keymaps () 2019-03-19 12:57:40 -07:00
config.h Adds a default value for IS_COMMAND for COMMAND feature () 2019-01-26 15:49:45 -08:00
i2c.c Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
i2c.h Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
info.json Fixsingakeymaps () 2018-06-09 17:32:51 -07:00
matrix.c Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
singa.c Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
singa.h Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00
usbconfig.h Adding Singa Repo w/ Config Support () 2018-06-09 13:25:22 -07:00

Singa

Singa

A short description of the keyboard/project

Keyboard Maintainer: amnesia0287
Hardware Supported: TGR-Elaine v1.0 PCB
Hardware Availability: http://singakbd.com/

Make example for this keyboard (after setting up your build environment):

make singa:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See build environment setup then the make instructions for more information.