1
0
Fork 0
qmk_firmware/keyboards/zeal60/keymaps/tusing/config.h
Joe Wasson 743449472e Make PREVENT_STUCK_MODIFIERS the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00

36 lines
1.4 KiB
C

#pragma once
/* Enable/disable LEDs based on layout. */
#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
#undef RGB_BACKLIGHT_USE_ISO_ENTER
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
// Set up RGB underglow.
#define RGB_DI_PIN B0 // The pin your RGB strip is wired to
#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio)
#define RGBLED_NUM 35 // Number of LEDs
#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue
#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat
#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val
// Enable current limiting for RGB underglow.
#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard)
#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness.
// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c.
// This allows to mitigate uneven brightness from LED underglow strips.
// #define LED_BRIGHTNESS_CORRECTION