1
0
Fork 0
qmk_firmware/keyboards/just60
Jianfei Wang 77f66cc5e1 [Keyboard] add Just60 keyboard ()
* [Keyboard] add Just60 keyboard

* [Keyboard] just60: fixes per suggestions

* Update keyboards/just60/rules.mk

* Update keyboards/just60/readme.md

* Update keyboards/just60/rules.mk

* [Keyboard] just60: add keymap specific bootloader

* Revert "[Keyboard] just60: add keymap specific bootloader"

This reverts commit 0357e0a6f40233eec43f42c32fb405f60e7fbb1c.
2020-01-01 22:28:05 -08:00
..
keymaps/default [Keyboard] add Just60 keyboard () 2020-01-01 22:28:05 -08:00
config.h [Keyboard] add Just60 keyboard () 2020-01-01 22:28:05 -08:00
just60.h [Keyboard] add Just60 keyboard () 2020-01-01 22:28:05 -08:00
readme.md [Keyboard] add Just60 keyboard () 2020-01-01 22:28:05 -08:00
rules.mk [Keyboard] add Just60 keyboard () 2020-01-01 22:28:05 -08:00

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, RESET, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Make example for this keyboard (after setting up your build environment):

make just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.