1
0
Fork 0
qmk_firmware/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt

76 lines
2.4 KiB
Text

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Keyboard Device Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBx)
* \li Series C XMEGA AVRs (ATXMEGAxxxCx)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Keyboard Subclass</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification \n
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Keyboard demonstration application. This gives a simple reference application
* for implementing a USB Keyboard using the basic USB HID drivers in all modern
* OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
* works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
*
* On start-up the system will automatically enumerate and function as a keyboard
* when the USB connection to a host is present. To use the keyboard example,
* manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
* documentation for more information on sending keyboard event and key presses. Unlike
* other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
* inside the same report to the host.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/