1
0
Fork 0
qmk_firmware/keyboards/planck/rules.mk
Jack Humbert 14b7602a65
Adds IS31FL3731 RGB Matrix Implementation ()
* adds is31fl3731 rgb matrix implementation

* fix build script for force pushes

* allow bootloader size to be overwritten

* adds planck light implementation

* split led config into 2 arrays

* idk

* betterize register handling

* update planck implementation

* update planck

* refine rgb interface

* cleanup names, rgb matrix

* start documentation

* finish up docs

* add effects list

* clean-up merge

* add RGB_MATRIX_SKIP_FRAMES

* add support for at90usb1286 to bootloader options
2018-05-08 15:24:18 -04:00

81 lines
3.3 KiB
Makefile

# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifeq ($(strip $(KEYBOARD)), planck/rev3)
BOOTLOADER = atmel-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/rev4)
BOOTLOADER = atmel-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/rev5)
BOOTLOADER = qmk-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/light)
BOOTLOADER = atmel-dfu
endif
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
LAYOUTS = ortho_4x12 planck_mit planck_grid
LAYOUTS_HAS_RGB = no
DEFAULT_FOLDER = planck/rev5