_/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/converter/xt_usb
History
ridingqwerty 66fe3001e4
Trim firmware sizes from default rules.mk, part 1 (#8027) 
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files

* Correct some 'rules.mk' in boards buried under vendor folders

* PR8027 patch

Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-01-29 12:51:25 -05:00
..
keymaps/default [Keyboard] Fix Print Screen key for XT to USB converter (#7039) 2019-10-25 18:23:11 -07:00
config.h [Keyboard] XT converter: add config_common.h include and fix E0 collision (#7341) 2019-11-13 00:38:37 -08:00
info.json [Keyboard] Fix Print Screen key for XT to USB converter (#7039) 2019-10-25 18:23:11 -07:00
matrix.c [Keyboard] XT converter: add config_common.h include and fix E0 collision (#7341) 2019-11-13 00:38:37 -08:00
README.md Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
rules.mk Trim firmware sizes from default rules.mk, part 1 (#8027) 2020-01-29 12:51:25 -05:00
xt_usb.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
xt_usb.h [Keyboard] Fix Print Screen key for XT to USB converter (#7039) 2019-10-25 18:23:11 -07:00

README.md

XT to USB keyboard converter

This is a port of TMK's converter/xt_usb to QMK.

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

  1. Connect Vcc and GND.
  2. Connect Clock and Data line. Clock is on PD1, Data on PD0 by default. And optionally you can use PB7 for Reset.(Compatible to Soarer's converter) To change pin configuration edit config.h.
  3. You need pull-up resistor. 1K-10K Ohm will be OK.

XT keyboard protocol resource

https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol