_/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/cod67
History
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301) 
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps/default Remove empty fn_actions[] 2019-01-11 18:32:43 -08:00
cod67.c COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
cod67.h COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
info.json COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00

readme.md

Gray COD67

![cod67](imgur.com image replace me!)

The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.

There were only 75 units made worldwide.

Keyboard Maintainer: MechMerlin
Hardware Supported: Gray COD67 Hardware Availability: Zfrontier

At this time, flashing ONLY works on Windows systems.

To put in bootloader mode, hold the Esc key while plugging in the USB cable.

The COD67 will show up as a drive.

Make example for this keyboard (after setting up your build environment):

make cod67:default:bin

See build environment setup then the make instructions for more information.

Rename the resulting .bin file to cod67.bin.

Drag and drop cod67.bin to the drive, overwriting the previous cod67.bin stored on it.

Press the Esc key again to reset the board. You are now ready to type!

Notes

The backlight pin is attached to a non PWM pin D4 so backlight is only on/off.