1
0
Fork 0
qmk_firmware/util/linux_install.sh
James Forcier f538b2273a
Upgrade gcc version/tweak package installs in Gentoo installation ()
GCC 4.9.4 is no longer available on Gentoo (or Sabayon), which causes
problems when attempting to install on either of these platforms. Since
QMK is not particularly sensitive to its GCC version, modify the version
restriction to <9 so newer versions of GCC may be installed. Since the
toolchain for arm-none-eabi isn't currently installed as part of setup,
add that as well.

Additionally, drop the Python installation as part of the Gentoo
installation process. Python is a core system package on Gentoo and can
therefore be assumed to be present; in addition, the slot restriction of
3.5 which was present is also no longer available in Gentoo.

Finally, separate the gcc rebuild invocation of `emerge` from the new
packages that may need to be installed, and apply the `--noreplace` flag
to new packages so that they are not rebuilt if already present.
2020-04-12 16:13:45 +10:00

236 lines
6.1 KiB
Bash
Executable file

#!/bin/sh
# Note: This file uses tabs to indent. Please don't mix tabs and spaces.
GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
SOLUS_INFO="Your tools are now installed. To start using them, open new terminal or source these scripts:\n\t/usr/share/defaults/etc/profile.d/50-arm-toolchain-path.sh\n\t/usr/share/defaults/etc/profile.d/50-avr-toolchain-path.sh"
util_dir=$(dirname "$0")
# For those distros that do not package bootloadHID
install_bootloadhid() {
if ! command -v bootloadHID >/dev/null; then
wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
cd /tmp/bootloadHID.2012-12-08/commandline/
if make; then
sudo cp bootloadHID /usr/local/bin
fi
cd -
fi
}
if grep ID /etc/os-release | grep -qE "fedora"; then
sudo dnf install \
arm-none-eabi-binutils-cs \
arm-none-eabi-gcc-cs \
arm-none-eabi-newlib \
avr-binutils \
avr-gcc \
avr-libc \
binutils-avr32-linux-gnu \
clang \
dfu-util \
dfu-programmer \
diffutils \
git \
gcc \
glibc-headers \
kernel-devel \
kernel-headers \
libusb-devel \
make \
perl \
python3 \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
DEBIAN_FRONTEND=noninteractive
DEBCONF_NONINTERACTIVE_SEEN=true
export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
sudo apt-get update
sudo apt-get -yq install \
build-essential \
avr-libc \
binutils-arm-none-eabi \
binutils-avr \
clang-format \
dfu-programmer \
dfu-util \
diffutils \
gcc \
gcc-arm-none-eabi \
gcc-avr \
git \
libnewlib-arm-none-eabi \
libusb-dev \
python3 \
python3-pip \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
sudo pacman --needed -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
sudo pacman -S --needed \
arm-none-eabi-binutils \
arm-none-eabi-gcc \
arm-none-eabi-newlib \
avrdude \
avr-binutils \
avr-libc \
base-devel \
clang \
dfu-programmer \
dfu-util \
diffutils \
gcc \
git \
libusb-compat \
python \
python-pip \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q gentoo; then
echo "$GENTOO_WARNING" | fmt
printf "\nProceed (y/N)? "
read -r answer
if echo "$answer" | grep -iq "^y"; then
sudo touch /etc/portage/package.use/qmkfirmware
# tee is used here since sudo doesn't apply to >>
echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
sudo emerge -auN sys-devel/gcc
sudo emerge -au --noreplace \
app-arch/unzip \
app-arch/zip \
app-mobilephone/dfu-util \
dev-embedded/avrdude \
net-misc/wget \
sys-devel/clang \
sys-devel/crossdev
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
echo "Done!"
else
echo "Quitting..."
fi
elif grep ID /etc/os-release | grep -q sabayon; then
sudo equo install \
app-arch/unzip \
app-arch/zip \
app-mobilephone/dfu-util \
dev-embedded/avrdude \
dev-lang/python \
net-misc/wget \
sys-devel/clang \
sys-devel/gcc \
sys-devel/crossdev
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
echo "Done!"
elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
CROSS_AVR_GCC=cross-avr-gcc8
CROSS_ARM_GCC=cross-arm-none-gcc8
if grep ID /etc/os-release | grep -q "15."; then
CROSS_AVR_GCC=cross-avr-gcc7
CROSS_ARM_GCC=cross-arm-none-gcc7
fi
sudo zypper install \
avr-libc \
clang \
$CROSS_AVR_GCC \
$CROSS_ARM_GCC \
cross-avr-binutils \
cross-arm-none-newlib-devel \
cross-arm-binutils cross-arm-none-newlib-devel \
dfu-tool \
dfu-programmer \
gcc \
libusb-devel \
python3 \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q slackware; then
printf "$SLACKWARE_WARNING\n"
printf "\nProceed (y/N)? "
read -r answer
if echo "$answer" | grep -iq "^y" ;then
sudo sboinstall \
avr-binutils \
avr-gcc \
avr-libc \
avrdude \
dfu-programmer \
dfu-util \
arm-binutils \
arm-gcc \
newlib \
python3
echo "Done!"
else
echo "Quitting..."
fi
elif grep ID /etc/os-release | grep -q solus; then
sudo eopkg ur
sudo eopkg it \
-c system.devel \
arm-none-eabi-gcc \
arm-none-eabi-binutils \
arm-none-eabi-newlib \
avr-libc \
avr-binutils \
avr-gcc \
avrdude \
dfu-util \
dfu-programmer \
libusb-devel \
python3 \
git \
wget \
zip \
unzip
printf "\n$SOLUS_INFO\n"
elif grep ID /etc/os-release | grep -q void; then
# musl Void systems don't have glibc cross compilers avaliable in their repos.
# glibc Void systems do have musl cross compilers though, for some reason.
# So, default to musl, and switch to glibc if it is installed.
CROSS_ARM=cross-arm-linux-musleabi
if xbps-query glibc > /dev/null; then # Check is glibc if installed
CROSS_ARM=cross-arm-linux-gnueabi
fi
sudo xbps-install \
avr-binutils \
avr-gcc \
avr-libc \
$CROSS_ARM \
dfu-programmer \
dfu-util \
gcc \
git \
make \
wget \
unzip \
zip
else
echo "Sorry, we don't recognize your OS. Help us by contributing support!"
echo
echo "https://docs.qmk.fm/#/contributing"
fi
# Global install tasks
install_bootloadhid
pip3 install --user -r ${util_dir}/../requirements.txt