History

Drashna Jaelre 7ba82cb5b7 bface refactor (#6333 ) * remove custom matrix support * remove custom i2c and led driver * minor cleanups * update readme		2019-07-15 10:38:26 -07:00
..
keymaps	[Keymap] [bface] My custom layout (#6322 )	2019-07-14 19:32:08 -07:00
bface.c	remove custom i2c and led driver	2019-07-14 18:11:16 -07:00
bface.h	minor cleanups	2019-07-14 18:11:26 -07:00
config.h	remove custom matrix support	2019-07-14 18:00:09 -07:00
info.json	[Keyboard] Winkeyless Directory (#5163 )	2019-02-18 08:35:34 -08:00
README.md	update readme	2019-07-14 18:14:00 -07:00
rules.mk	remove custom i2c and led driver	2019-07-14 18:11:16 -07:00
usbconfig.h	minor cleanups	2019-07-14 18:11:26 -07:00

README.md

B.face

A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other.

Keyboard Maintainer: QMK Community
Hardware Supported: B.face PCB
Hardware Availability: Winkeyless

Make example for this keyboard (after setting up your build environment):

make winkeyless/bface:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard.

Windows:

Download HIDBootFlash.
Place your keyboard into reset.
Press the Find Device button and ensure that your keyboard is found.
Press the Open .hex File button and locate the .hex file you created.
Press the Flash Device button and wait for the process to complete.

macOS:

Install homebrew by typing the following:

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

Install crosspack-avr.
```
brew cask install crosspack-avr
```

Install the following packages:

brew install python
pip3 install pyusb
brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

Place your keyboard into reset.
Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.