1
0
Fork 0
qmk_firmware/keyboards/staryu/rules.mk
Kenneth Aloysius 0912c42f04 Add Staryu macropad support ()
* Add M6-A keymap

* Update XD60 keymap

* Update XD60 keymap readme

* Update JJ40 and Let's Split keymaps

* Add readme for M6-A

* Fix typo, update JJ40 README

* Update jj40 readme

* Cleanup jj40 keymap

* Revert Let's Split QWERTY layer to default before 

* Update numpad layers

* Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer

* Keep ASCII art consistent with keymap

* Staryu: initial port

* Add personal keymap

* Added and updated READMEs

* Fix: default keymap for staryu

* Rudimentary backlight support.

* Enabled mousekeys for default keymap

* use QMK_KEYBOARD_H and LAYOUT

* Update readme.md for NIU mini: flash using avrdude

* Fix missing linebreaks for Staryu README

* Update readme.md
2018-04-20 09:14:40 -07:00

60 lines
2.5 KiB
Makefile
Executable file

# MCU name
MCU = atmega32u2
BOOTLOADER = lufa-dfu
SRC = backlight_staryu.c
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # In-switch LEDs
AUDIO_ENABLE = no # There is no available timer or pin for audio on the NovelPad
RGBLIGHT_ENABLE = yes # RGB LEDs for underglow, installed and enabled by default for the NovelPad