1
0
Fork 0
qmk_firmware/users/drashna/rgb_stuff.c
Drashna Jaelre e88f80a891
[Keymap] Big Drashna code update ()
* Add a quefrency keymap

* New Alt-ernate layouts

* Enable Per Key Tapping Term to preserve sanity

* Use underglow and mod lights for status on Corne

* Update the drashna_ms keymap for quefrency

* Disable Audio since there isn't enough space

* Update KC_MAKE to ues :flash target

* Cleanup ergodox layout

* Enable i2c support for Iris

* Add keymap support for CG_SWAP

* Enable RGB Matrix Shutdown mode

* enable heatmap

* Update gitlab CI to install python3

* Remove game macros

These are no longer needed, and haven't been used in ages

* Cleanup planck layout

* Add RGB Matrix fun and RGB cleanup

* Add keycode and config for RGB Matrix idle animations

* Clean up rgb idle animation code

* Add rgb idle keycode to keymaps

* Fix issues with rgb matrix idle animation

* Fix some handling for idle animation

* Reduce idle animation timeout to 15s to be more reasonable

* fix up rgb stuff

* Fix isses with rgb functions not being called for matrix

* Use custom EEPROM Magic Number so testing is easier

* Extend Default Layer macro to support a lot more layers

* Fix bjohnson macropad

* Adjust KC_MAKE to process mods for more consistent behavior

* Fix up rgb stuff on corne

* Corne OLED Overhaul

* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor

Due to odd issues, I ended up rewriting from scratch.  And using PROGMEM versions, since I think I was getting memory overflows.

* Update polling rate on all keebs

* Fix planck ez layout config

* Remove macros from Viterbi
2019-09-07 08:57:30 -07:00

442 lines
16 KiB
C

#include "drashna.h"
#include "rgb_stuff.h"
#include "eeprom.h"
#if defined(RGBLIGHT_ENABLE)
extern rgblight_config_t rgblight_config;
bool has_initialized;
void rgblight_sethsv_default_helper(uint8_t index) { rgblight_sethsv_at(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, index); }
#endif // RGBLIGHT_ENABLE
#if defined(RGB_MATRIX_ENABLE)
static uint32_t hypno_timer;
# if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_crkbd)
# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
# else
# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN
# endif
#endif
/* Custom indicators for modifiers.
* This allows for certain lights to be lit up, based on what mods are active, giving some visual feedback.
* This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up.
*/
#ifdef RGBLIGHT_ENABLE
#ifdef INDICATOR_LIGHTS
void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
if (userspace_config.rgb_layer_change && biton32(layer_state) == 0) {
if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) {
# ifdef SHFT_LED1
rgblight_sethsv_at(120, 255, 255, SHFT_LED1);
# endif // SHFT_LED1
# ifdef SHFT_LED2
rgblight_sethsv_at(120, 255, 255, SHFT_LED2);
# endif // SHFT_LED2
} else {
# ifdef SHFT_LED1
rgblight_sethsv_default_helper(SHFT_LED1);
# endif // SHFT_LED1
# ifdef SHFT_LED2
rgblight_sethsv_default_helper(SHFT_LED2);
# endif // SHFT_LED2
}
if ((this_mod | this_osm) & MOD_MASK_CTRL) {
# ifdef CTRL_LED1
rgblight_sethsv_at(0, 255, 255, CTRL_LED1);
# endif // CTRL_LED1
# ifdef CTRL_LED2
rgblight_sethsv_at(0, 255, 255, CTRL_LED2);
# endif // CTRL_LED2
} else {
# ifdef CTRL_LED1
rgblight_sethsv_default_helper(CTRL_LED1);
# endif // CTRL_LED1
# ifdef CTRL_LED2
rgblight_sethsv_default_helper(CTRL_LED2);
# endif // CTRL_LED2
}
if ((this_mod | this_osm) & MOD_MASK_GUI) {
# ifdef GUI_LED1
rgblight_sethsv_at(51, 255, 255, GUI_LED1);
# endif // GUI_LED1
# ifdef GUI_LED2
rgblight_sethsv_at(51, 255, 255, GUI_LED2);
# endif // GUI_LED2
} else {
# ifdef GUI_LED1
rgblight_sethsv_default_helper(GUI_LED1);
# endif // GUI_LED1
# ifdef GUI_LED2
rgblight_sethsv_default_helper(GUI_LED2);
# endif // GUI_LED2
}
if ((this_mod | this_osm) & MOD_MASK_ALT) {
# ifdef ALT_LED1
rgblight_sethsv_at(240, 255, 255, ALT_LED1);
# endif // ALT_LED1
# ifdef GUI_LED2
rgblight_sethsv_at(240, 255, 255, ALT_LED2);
# endif // GUI_LED2
} else {
# ifdef GUI_LED1
rgblight_sethsv_default_helper(ALT_LED1);
# endif // GUI_LED1
# ifdef GUI_LED2
rgblight_sethsv_default_helper(ALT_LED2);
# endif // GUI_LED2
}
}
}
/* Function for the indicators */
void matrix_scan_indicator(void) {
if (has_initialized) {
set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods());
}
}
#endif // INDICATOR_LIGHTS
#ifdef RGBLIGHT_TWINKLE
static rgblight_fadeout lights[RGBLED_NUM];
__attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) { return false; }
/* This function checks for used LEDs. This way, collisions don't occur and cause weird rendering */
bool rgblight_twinkle_is_led_used(uint8_t index) {
switch (index) {
# ifdef INDICATOR_LIGHTS
# ifdef SHFT_LED1
case SHFT_LED1:
return true;
# endif // SHFT_LED1
# ifdef SHFT_LED2
case SHFT_LED2:
return true;
# endif // SHFT_LED2
# ifdef CTRL_LED1
case CTRL_LED1:
return true;
# endif // CTRL_LED1
# ifdef CTRL_LED2
case CTRL_LED2:
return true;
# endif // CTRL_LED2
# ifdef GUI_LED1
case GUI_LED1:
return true;
# endif // GUI_LED1
# ifdef GUI_LED2
case GUI_LED2:
return true;
# endif // GUI_LED2
# ifdef ALT_LED1
case ALT_LED1:
return true;
# endif // ALT_LED1
# ifdef ALT_LED2
case ALT_LED2:
return true;
# endif // ALT_LED2
# endif // INDICATOR_LIGHTS
default:
return rgblight_twinkle_is_led_used_keymap(index);
}
}
/* Handler for fading/twinkling effect */
void scan_rgblight_fadeout(void) { // Don't effing change this function .... rgblight_sethsv is supppppper intensive
bool litup = false;
for (uint8_t light_index = 0; light_index < RGBLED_NUM; ++light_index) {
if (lights[light_index].enabled && timer_elapsed(lights[light_index].timer) > 10) {
rgblight_fadeout *light = &lights[light_index];
litup = true;
if (light->life) {
light->life -= 1;
if (biton32(layer_state) == 0) {
sethsv(light->hue + rand() % 0xF, 255, light->life, (LED_TYPE *)&led[light_index]);
}
light->timer = timer_read();
} else {
if (light->enabled && biton32(layer_state) == 0) {
rgblight_sethsv_default_helper(light_index);
}
litup = light->enabled = false;
}
}
}
if (litup && biton32(layer_state) == 0) {
rgblight_set();
}
}
/* Triggers a LED to fade/twinkle.
* This function handles the selection of the LED and prepres for it to be used.
*/
void start_rgb_light(void) {
uint8_t indices[RGBLED_NUM];
uint8_t indices_count = 0;
uint8_t min_life = 0xFF;
uint8_t min_life_index = -1;
for (uint8_t index = 0; index < RGBLED_NUM; ++index) {
if (rgblight_twinkle_is_led_used(index)) {
continue;
}
if (lights[index].enabled) {
if (min_life_index == -1 || lights[index].life < min_life) {
min_life = lights[index].life;
min_life_index = index;
}
continue;
}
indices[indices_count] = index;
++indices_count;
}
uint8_t light_index;
if (!indices_count) {
light_index = min_life_index;
} else {
light_index = indices[rand() % indices_count];
}
rgblight_fadeout *light = &lights[light_index];
light->enabled = true;
light->timer = timer_read();
light->life = 0xC0 + rand() % 0x40;
light->hue = rgblight_config.hue + (rand() % 0xB4) - 0x54;
rgblight_sethsv_at(light->hue, 255, light->life, light_index);
}
#endif
#endif // RGBLIGHT_ENABLE
bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
uint16_t temp_keycode = keycode;
// Filter out the actual keycode from MT and LT keys.
if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
temp_keycode &= 0xFF;
}
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
hypno_timer = timer_read32();
if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_REST_MODE) {
rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
}
#endif
switch (temp_keycode) {
#ifdef RGBLIGHT_TWINKLE
case KC_A ... KC_SLASH:
case KC_F1 ... KC_F12:
case KC_INSERT ... KC_UP:
case KC_KP_SLASH ... KC_KP_DOT:
case KC_F13 ... KC_F24:
case KC_AUDIO_MUTE ... KC_MEDIA_REWIND:
if (record->event.pressed) {
start_rgb_light();
}
break;
#endif // RGBLIGHT_TWINKLE
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
if (record->event.pressed) {
userspace_config.rgb_layer_change ^= 1;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
eeconfig_update_user(userspace_config.raw);
if (userspace_config.rgb_layer_change) {
layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
}
}
#endif // RGBLIGHT_ENABLE
break;
case RGB_IDL: // This allows me to use underglow as layer indication, or as normal
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
if (record->event.pressed) {
userspace_config.rgb_matrix_idle_anim ^= 1;
dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
eeconfig_update_user(userspace_config.raw);
if (userspace_config.rgb_matrix_idle_anim) { rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP); }
}
#endif
break;
case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
if (record->event.pressed) {
bool is_eeprom_updated = false;
#ifdef RGBLIGHT_ENABLE
// This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
if (userspace_config.rgb_layer_change) {
userspace_config.rgb_layer_change = false;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
is_eeprom_updated = true;
}
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
if (userspace_config.rgb_matrix_idle_anim) {
userspace_config.rgb_matrix_idle_anim = false;
dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
is_eeprom_updated = true;
}
#endif
if (is_eeprom_updated) { eeconfig_update_user(userspace_config.raw); }
}
break;
}
return true;
}
void keyboard_post_init_rgb(void) {
#if defined(RGBLIGHT_ENABLE)
# if defined(RGBLIGHT_STARTUP_ANIMATION)
bool is_enabled = rgblight_config.enable;
if (userspace_config.rgb_layer_change) {
rgblight_enable_noeeprom();
}
if (rgblight_config.enable) {
layer_state_set_user(layer_state);
uint16_t old_hue = rgblight_config.hue;
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
for (uint16_t i = 255; i > 0; i--) {
rgblight_sethsv_noeeprom((i + old_hue) % 255, 255, 255);
matrix_scan();
wait_ms(10);
}
}
if (!is_enabled) {
rgblight_disable_noeeprom();
}
# endif
layer_state_set_user(layer_state);
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
if (userspace_config.rgb_matrix_idle_anim) {
rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
}
#endif
}
void matrix_scan_rgb(void) {
#ifdef RGBLIGHT_ENABLE
# ifdef RGBLIGHT_TWINKLE
scan_rgblight_fadeout();
# endif // RGBLIGHT_ENABLE
# ifdef INDICATOR_LIGHTS
matrix_scan_indicator();
# endif
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_TYPING_HEATMAP && timer_elapsed32(hypno_timer) > 15000) {
rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
}
#endif
}
layer_state_t layer_state_set_rgb(layer_state_t state) {
#ifdef RGBLIGHT_ENABLE
if (userspace_config.rgb_layer_change) {
switch (biton32(state)) {
case _MACROS:
rgblight_sethsv_noeeprom_orange();
userspace_config.is_overwatch ? rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 2) : rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 3);
break;
case _MEDIA:
rgblight_sethsv_noeeprom_chartreuse();
rgblight_mode_noeeprom(RGBLIGHT_MODE_KNIGHT + 1);
break;
case _GAMEPAD:
rgblight_sethsv_noeeprom_orange();
rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 2);
break;
case _DIABLO:
rgblight_sethsv_noeeprom_red();
rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
break;
case _RAISE:
rgblight_sethsv_noeeprom_yellow();
rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
break;
case _LOWER:
rgblight_sethsv_noeeprom_green();
rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
break;
case _ADJUST:
rgblight_sethsv_noeeprom_red();
rgblight_mode_noeeprom(RGBLIGHT_MODE_KNIGHT + 2);
break;
default: // for any other layers, or the default layer
switch (biton32(default_layer_state)) {
case _COLEMAK:
rgblight_sethsv_noeeprom_magenta();
break;
case _DVORAK:
rgblight_sethsv_noeeprom_springgreen();
break;
case _WORKMAN:
rgblight_sethsv_noeeprom_goldenrod();
break;
case _NORMAN:
rgblight_sethsv_noeeprom_coral();
break;
case _MALTRON:
rgblight_sethsv_noeeprom_yellow();
break;
case _EUCALYN:
rgblight_sethsv_noeeprom_pink();
break;
case _CARPLAX:
rgblight_sethsv_noeeprom_blue();
break;
default:
rgblight_sethsv_noeeprom_cyan();
break;
}
biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
break;
}
}
#endif // RGBLIGHT_ENABLE
return state;
}
#ifdef RGB_MATRIX_ENABLE
# include "lib/lib8tion/lib8tion.h"
extern led_config_t g_led_config;
void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
HSV hsv = {hue, sat, val};
if (hsv.v > rgb_matrix_config.hsv.v) {
hsv.v = rgb_matrix_config.hsv.v;
}
switch (mode) {
case 1: // breathing
{
uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8);
hsv.v = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
RGB rgb = hsv_to_rgb(hsv);
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
}
}
break;
}
default: // Solid Color
{
RGB rgb = hsv_to_rgb(hsv);
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
}
}
break;
}
}
}
#endif