1
0
Fork 0
qmk_firmware/tmk_core/protocol/bluefruit/main.c

139 lines
3.8 KiB
C

/*
Bluefruit Protocol for TMK firmware
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <avr/sleep.h>
#include <util/delay.h>
#include "../serial.h"
#include "keyboard.h"
#include "usb.h"
#include "host.h"
#include "timer.h"
#include "print.h"
#include "debug.h"
#include "sendchar.h"
#include "suspend.h"
#include "bluefruit.h"
#include "pjrc.h"
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define HOST_DRIVER_NOT_SET 0
#define BLUEFRUIT_HOST_DRIVER 1
#define PJRC_HOST_DRIVER 2
int main(void)
{
CPU_PRESCALE(0);
// DDRD = _BV(PD5);
// DDRB = _BV(PB0);
// PORTD = _BV(PD5);
// PORTB = _BV(PB0);
print_set_sendchar(sendchar);
// usb_init();
// _delay_ms(2000);
// while (!usb_configured()) /* wait */
dprintf("Initializing keyboard...\n");
keyboard_init();
// This implementation is pretty simplistic... if the USB connection
// is not configured, choose the Bluefruit, otherwise use USB
// Definitely would prefer to have this driven by an input pin and make
// it switch dynamically - BCG
// if (!usb_configured()) {
// // Send power to Bluefruit... Adafruit says it takes 27 mA, I think
// // the pins should provide 40 mA, but just in case I switch the
// // Bluefruit using a transistor - BCG
// DDRB = _BV(PB6);
// PORTB |= _BV(PB6);
dprintf("Setting host driver to bluefruit...\n");
host_set_driver(bluefruit_driver());
dprintf("Initializing serial...\n");
serial_init();
// char swpa[] = "+++\r\n";
// for (int i = 0; i < 5; i++) {
// serial_send(swpa[i]);
// }
// char ble_enable[] = "AT+BLEKEYBOARDEN=1\r\n";
// for (int i = 0; i < 20; i++) {
// serial_send(ble_enable[i]);
// }
// char reset[] = "ATZ\r\n";
// for (int i = 0; i < 5; i++) {
// serial_send(reset[i]);
// }
// for (int i = 0; i < 5; i++) {
// serial_send(swpa[i]);
// }
// wait an extra second for the PC's operating system
// to load drivers and do whatever it does to actually
// be ready for input
_delay_ms(1000);
// PORTD = ~_BV(PD5);
dprintf("Starting main loop");
while (1) {
keyboard_task();
}
// } else {
// // I'm not smart enough to get this done with LUFA - BCG
// dprintf("Setting host driver to PJRC...\n");
// host_set_driver(pjrc_driver());
// #ifdef SLEEP_LED_ENABLE
// sleep_led_init();
// #endif
// // wait an extra second for the PC's operating system
// // to load drivers and do whatever it does to actually
// // be ready for input
// _delay_ms(1000);
// PORTB = ~_BV(PB0);
// dprintf("Starting main loop");
// while (1) {
// while (suspend) {
// suspend_power_down();
// if (remote_wakeup && suspend_wakeup_condition()) {
// usb_remote_wakeup();
// }
// }
// keyboard_task();
// }
// }
}