1
0
Fork 0
qmk_firmware/keyboards/helix/rev2/keymaps/led_test
MakotoKurauchi 155375ea32 Helix shrink config (#3268)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* renumber _ADJUST for shrink program size

* Fix Helix i2c wrong bit rate

* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes

* Shrinked config.h
2018-06-30 13:12:17 -07:00
..
README.md add README.md into keyboards/helix/rev2/keymaps/led_test/ (#2582) 2018-03-23 16:04:49 -07:00
config.h Helix shrink config (#3268) 2018-06-30 13:12:17 -07:00
keymap.c Helix: Refactor and Configurator support (#3238) 2018-06-27 07:37:27 -07:00
rgblight.c Fix helix:led_test build break (#3110) 2018-06-02 09:07:32 -07:00
rgblight.h Fix helix:led_test build break (#3110) 2018-06-02 09:07:32 -07:00
rules.mk Helix shrink config (#3268) 2018-06-30 13:12:17 -07:00

README.md

LED test Keymap

Layout

The layout is the same as default.

Feature

  • OLED is enabled.
  • LED backlight is enabled and always lit.
  • The lighting color of LED changes periodically. Red, Green and Blue.

The user can check whether the LED is lit or not.

Compile

$ cd qmk_firmware
$ make helix:led_test

Flash QMK Firmware

Execute the 'make' command and press the reset switch on the keyboard.

$ make helix:led_test:avrdude