1
0
Fork 0
qmk_firmware/keyboards/lets_split
Mikkel Jeppesen 19a85015c2 [Keyboard] Added Vitamins Included Rev2 ()
* Fixed pin for RGB

* Added support for second revision of vitamins included

* Added rev2 config and switched to #pragma once

* Switch to quantum.h pincontrol

* Fixed left-half check

* Moved revision agnostic code to main header file

* Moved common build options to main makefile

* Referred to rev2 documentation

* JTAG is dissabled in keyboard.c now

* moved EEHANDS to rev1 config

* moved rev2 to use split_common

* Updated default keymaps

* Changed handedness ifdef to allow user-overrides

* Add some space saving defines

* Changed to more sane I2C clock

* Removed rev2 check in matrix.c as rev2 uses split_common

* Removed rev2 check in rev1 only code

* Update debounce constant name

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Switch KEYMAP macro to LAYOUT

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Switch kc_keymap macro to layout_kc

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Switch kc_keymap macro to layout_kc

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Add legacy layout macro alias

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/vitamins_included/rev2/config.h

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Split readme into revision specific versions

* Updated src to allow LTO

* Renamed readmes to lower-case

* Switched my keyboards to FEED VID

* Fixed markdown lint errors

* fixed readme links

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Maintain keymap backwards compatibility

Co-Authored-By: Joel Challis <git@zvecr.com>
2019-08-30 17:52:02 -07:00
..
keymaps Remove unused _BOOTLOADER defines 2019-08-04 20:46:57 -07:00
rev1 Remove old promicro_bootloader_jmp() declarations () 2019-08-21 02:05:08 +01:00
rev2 Remove old promicro_bootloader_jmp() declarations () 2019-08-21 02:05:08 +01:00
sockets [Keyboard] Added Vitamins Included Rev2 () 2019-08-30 17:52:02 -07:00
config.h Keyboard: Refactor lets split to use split common code () 2018-12-05 09:51:35 -08:00
info.json Let's Split refactor and Configurator support () 2018-06-28 22:23:41 -07:00
lets_split.c Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
lets_split.h Keyboard: Refactor lets split to use split common code () 2018-12-05 09:51:35 -08:00
readme.md Document the correct path to the split keyboard EEPROM files () 2018-12-14 12:49:33 -08:00
rules.mk Remove unused _BOOTLOADER defines 2019-08-04 20:46:57 -07:00

Let's Split

This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/

Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards.

Hardware files for the Let's Split are now stored at http://qmk.fm/lets_split/ Hardware files for the sockets version can be found at https://github.com/dumle29/let-s-Split-v2/tree/socket-reverseable

Build Guide

A build guide for putting together the Let's Split v2 can be found here: An Overly Verbose Guide to Building a Let's Split Keyboard

There is additional information there about flashing and adding RGB underglow.

A build guide for putting together the sockets version can be found here: Guide will be made and linked here when the PCBs have been received and tested

First Time Setup

Download or clone the qmk_firmware repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:

$ make lets_split/rev2:default

You will see a lot of output and if everything worked correctly you will see the built hex file:

lets_split_rev2_default.hex

If you would like to use one of the alternative keymaps, or create your own, copy one of the existing keymaps and run make like so:

$ make lets_split/rev2:YOUR_KEYMAP_NAME

If everything worked correctly you will see a file:

lets_split_rev2_YOUR_KEYMAP_NAME.hex

For more information on customizing keymaps, take a look at the primary documentation for Customizing Your Keymap in the main readme.md.

Let's split 1.0

If you have a first generation Let's Split you will need to use the revision 1 code. To do so, use rev1 in all your commands instead.

Features

For the full Quantum Mechanical Keyboard feature list, see the parent readme.md.

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • You only need 3 wires to connect the two halves. Two for VCC and GND and one for serial communication.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note this requires an extra wire between halves and pull-up resistors on the data lines.

Required Hardware

Apart from diodes and key switches for the keyboard matrix in each half, you will need:

  • 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
  • 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable

Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors

Optional Hardware

A speaker can be hooked-up to either side to the 5 (C6) pin and GND, and turned on via AUDIO_ENABLE.

Wiring

The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros.

Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro and modify the matrix.c accordingly.

The wiring for serial:

serial wiring

The wiring for i2c:

i2c wiring

The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.

You can change your configuration between serial and i2c by modifying your config.h file.

Notes on Software Configuration

Configuring the firmware is similar to any other QMK project. One thing to note is that MATRIX_ROWS in config.h is the total number of rows between the two halves, i.e. if your split keyboard has 4 rows in each half, then use MATRIX_ROWS=8.

Also, the current implementation assumes a maximum of 8 columns, but it would not be very difficult to adapt it to support more if required.

Flashing

From the top level qmk_firmware directory run make KEYBOARD:KEYMAP:avrdude for automatic serial port resolution and flashing. Example: make lets_split/rev2:default:avrdude

Choosing which board to plug the USB cable into (choosing Master)

Because the two boards are identical, the firmware has logic to differentiate the left and right board.

It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.

The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.

The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.

Setting the left hand as master

If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out EE_HANDS and comment out I2C_MASTER_RIGHT or MASTER_RIGHT if for some reason it was set.

Setting the right hand as master

If you always plug the usb cable into the right board, add an extra flag to your config.h

 #define MASTER_RIGHT

Setting EE_hands to use either hands as master

If you define EE_HANDS in your config.h, you will need to set the EEPROM for the left and right halves.

The EEPROM is used to store whether the half is left handed or right handed. This makes it so that the same firmware file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run:

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep"
// or the equivalent in dfu-programmer

and similarly for right half

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep"
// or the equivalent in dfu-programmer

NOTE: replace $(COM_PORT) with the port of your device (e.g. /dev/ttyACM0)

After you have flashed the EEPROM, you then need to set EE_HANDS in your config.h, rebuild the hex files and reflash.

Note that you need to program both halves, but you have the option of using different keymaps for each half. You could program the left half with a QWERTY layout and the right half with a Colemak layout using bootmagic's default layout option. Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the right half is connected.

Notes on Using Pro Micro 3.3V

Do update the F_CPU parameter in rules.mk to 8000000 which reflects the frequency on the 3.3V board.

Also, if the slave board is producing weird characters in certain columns, update the following line in matrix.c to the following:

// _delay_us(30);  // without this wait read unstable value.
_delay_us(300);  // without this wait read unstable value.