qmk_firmware/keyboards/handwired/splittest/teensy_2

Teensy 2.0 splittest

To trigger keypress, short together pins F5 and F7

Wiring

• Add switches to both Teensy 2s across F5 and F7 pins
• Add pull-up resistor to left side between VCC and F0
• Add pull-down resistors to right side between GND and F0
• Connect the following pins on both sides together: D0, D1, GND, VCC
• Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
• Wire Di of RGB strip for each half to D3