History

Mikkel Jeppesen 05d6e6ca78 Ensure setPinInput actually sets input high-Z (#6237 ) * Ensure setPinInput actually sets input high-z * Fixed _PIN_ADDRESS Macro arguments as recommended by vomindoraan * Fixed instances of setInput to use new behavour * Changed kmac matrix to use input with pullups * Update keyboards/gh60/revc/revc.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fixed input state for unselect_rows * fixed merge conflict * Updated all instances of older uses of setPinInput() * Fixed naming mistake Co-authored-by: fauxpark <fauxpark@gmail.com>		2020-01-26 23:04:38 -05:00
..
keymaps	Ensure setPinInput actually sets input high-Z (#6237 )	2020-01-26 23:04:38 -05:00
config.h	[Keyboard] adjust h87a RGB settings (#7751 )	2020-01-02 14:35:05 -08:00
h87a.c	[Keyboard] adjust h87a RGB settings (#7751 )	2020-01-02 14:35:05 -08:00
h87a.h	[Keyboard] Update hineybush keyboard projects (#5554 )	2019-04-30 22:35:49 -07:00
info.json	[Keyboard] Update hineybush keyboard projects (#5554 )	2019-04-30 22:35:49 -07:00
readme.md	[Keyboard] Update hineybush keyboard projects (#5554 )	2019-04-30 22:35:49 -07:00
rules.mk	[Keyboard] adjust h87a RGB settings (#7751 )	2020-01-02 14:35:05 -08:00

readme.md

h87a

A QMK-powered replacement PCB for custom TKL keyboards. This PCB has the same size of the b.87 PCB, while using the USB port placement and spacebar stabilizer orientation as the a.87 PCB.

Keyboard Maintainer: hineybush
Hardware Supported: h87a ver. 1.5, ver. 1.6 (normal and thin), h87alps
Hardware Availability: hineybush.com

Make example for this keyboard (after setting up your build environment):

 make hineybush/h87a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

h87a hardware information

Controller: Atmega32u4

/* Column pin configuration
* col: 0   1   2   3   4   5   6   7   8   
* pin: F0  F1  F4  F5  F6  F7  C7  C6  D2
*/
 
/* Row pin configuration
* row: 0   1   2   3   4   5   6   7   8   9   10  11
* pin: B0  B1  B2  B3  D0  D1  B5  B6  D7  B4  D6  D4  (Rev 1)
*/

The H87a PCB utilizes duplex matrix organization.

Caps Lock LED: D5
Scroll Lock LED: E6
Num Lock LED: not supported
Backlight Pin: B7
RGB Data Pin: D3

For ver 1.5 in-switch indicators: To connect the Caps Lock LED to the main backlight matrix, jump the middle pad and the left pad on J1. To use the Caps Lock LED as an indicator, jump the middle pad and the right pad on J1.

To connect the Scroll Lock LED to the main backlight matrix, jump the middle pad and the right pad on J2. To use the Scroll Lock LED as an indicator, jump the middle pad and the left pad on J2.

Note: The different orientations of J1 and J2 was fixed with ver. 1.6.