_/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/ergodox
History
Gergely Nagy f512179e66 ergodox: Update algernon's keymap to v1.6 
Major changes include:

Base layer changes
------------------

* The parentheses & bracket keys have been merged: tapping them results
  in `[` or `{` (if it was shifted), double tapping leads to `(`.
* The `:;` and `-_` keys are now available on the base layer, on
  their **ADORE** location, too, just below `[{(`/`]})`.
* The `Apps` key has been replaced by `F12`.
* The `-`/`_` is no longer a tap-dance key.

ADORE layer changes
-------------------

* Adjustments were made to the **ADORE** layer, to separate some
  inconvenient combinations.

Miscellaneous changes
---------------------

* `LEAD u` now starts the symbolic unicode input system, instead of the
  OS-one.
* The mouse acceleration keys on the **Navigation and Media* layer have
  been turned into toggles: tap them once to turn them on, until tapped
  again. Tapping an accelerator button will turn all the others off.
* When the **ARROW** layer is on, the *red* and *blue* LEDs light up
  now.

Heatmap
-------

* The built-in keylogger has been greatly enhanced, it now outputs the
  pressed state, and the layer (Dvorak or ADORE). As such, the
  `ADORE_AUTOLOG` option has been removed, instead there is
  `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start
  when the keyboard boots. It defaults to off.
* The heatmap generator received a lot of updates.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-08-24 23:22:57 +02:00
..
ez move to ergodox-ez only 2016-08-23 07:04:55 +00:00
infinity Add default swap configs for a couple of boards. 2016-08-20 17:46:53 -07:00
keymaps ergodox: Update algernon's keymap to v1.6 2016-08-24 23:22:57 +02:00
config.h Move some of the Ergodox config settings to shared 2016-07-29 20:48:22 +03:00
ergodox.c Most ergodox keymaps compiles on Infinity 2016-07-29 20:48:20 +03:00
ergodox.h Most ergodox keymaps compiles on Infinity 2016-07-29 20:48:20 +03:00
Makefile Initial structure for Ergodox as subprojects 2016-07-29 20:48:04 +03:00
readme.md Updates ErgoDox readme 2016-08-01 21:15:01 -04:00

readme.md

Getting started

There are two main ways you could customize the ErgoDox (EZ and Infinity)

The Easy Way: Use an existing firmware file and just flash it (ErgoDox EZ only)

  1. Download and install the Teensy Loader. Some Linux distributions already provide a binary (may be called teensy-loader-cli), so you may prefer to use this.
  2. Find a firmware file you like. There are dozens of community-contributed keymaps you can browse and download. You can also use the Massdrop configurator to create a firmware Hex file you like.
  3. Download the firmware file
  4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded.

More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files.

This requires a little bit of familiarity with coding. If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8.

  1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :)

  2. Clone the repository (download it)

  3. Set up a build environment as per the readme.

  4. Copy keyboards/ergodox/keymaps/default/keymap.c into keymaps/your_name/keymap.c (for example, keymaps/german/keymap.c)

  5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work.

  6. Compile your firmware by running make keymap=keymap_name. For example, make keymap=german. This will result in a hex file, which will be called ergodox_ez_keymap_name.hex, e.g. ergodox_ez_german.hex. For Infinity ErgoDox you need to add subproject=infinity to the make command.

  7. ErgoDox EZ - Flash this hex file using the Teensy loader as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running make teensy keymap=keymap_name.

    Infinity ErgoDox - Flash the firmware by running make dfu-util keymap=keymap_name subproject=infinity

  8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics.

Good luck! :)

Contributing your keymap

The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format.

  1. All work goes inside your keymap subdirectory (keymaps/german in this example).
  2. keymap.c - this is your actual keymap file; please update the ASCII comments in the file so they correspond with what you did.
  3. readme.md - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :)
  4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use Keyboard Layout Editor to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout.

Finding the keycodes you need

Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need quantum/keymap_common.h.

That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot).

If you want to send a plain vanilla key, you can look up its code under doc/keycode.txt. That's where all the boring keys hang out.